Difference between revisions of "Software projects/OS/Slackware"

From Pandora Wiki
Jump to: navigation, search
(added "Software projects/OS/Slackware-13.37")
(Undo revision 27386 by Kingu (talk))
Line 1,399: Line 1,399:
 
= Website =
 
= Website =
 
* Put your http or php pages in /srv/www/htdocs/ .
 
* Put your http or php pages in /srv/www/htdocs/ .
 
Software projects/OS/Slackware-13.37
 
 
= Disclaimer =
 
Hi, this is Linux-SWAT.
 
 
Welcome to the SL4P, Slackware for Pandora, Wiki pages.
 
 
SL4P is a Slackware ARM overlay.
 
Slackware ARM is the official ARM Slackware port.<br>
 
Slackware ARM was formerly known as ARMedslack.
 
 
The 13.37 release page is located here:
 
http://boards.openpandora.org/index.php?/topic/7574-rebirth-competition-slackware-for-pandora-pre-release-thread/
 
 
The technical forum page is located here:
 
http://boards.openpandora.org/index.php?/topic/1524-slackware-inside-pandora/
 
 
I'm the maintainer of this Slackware port, and you can find me here:
 
http://boards.openpandora.org/index.php?/user/1035-linux-swat/
 
 
If you have questions, i suggest you to share it on the boards, not asking me privately.
 
 
Important notes:
 
SL4P is not affiliated in any way with Slackware or Slackware ARM.<br>
 
Please DO NOT contact any of them if you have problems with it. Contact ME.
 
 
SL4P is not affiliated in any way with Open Pandora GmbH or Open Pandora Ltd.<br>
 
Please DO NOT contact any of them if you have problems with it. Contact ME.
 
 
This software is distributed as is.
 
You are on your own responsibility when using it.
 
 
I distribute this documentation under the GPL 3 license.
 
http://www.gnu.org/licenses/gpl.html
 
 
= Stable or -current ? =
 
* Stable is for production use, ie. for work, as a server etc..
 
* -current is a work in progress. Although it's pretty usable, some things may be broken/unstable.
 
* ARMedslack 13.37 is armv4t, 14.0 and -current are armv5te, so 14.0 and -current should be a little faster and less battery-greedy.
 
* I won't rebuild the 14.0 or 13.37 if there's no big bad bug, i'll just add important features as packages. Of course, official Slackware updates are included.
 
* -current rootfs may be smaller or bigger from build to build, as i can include or remove KDE, amongst other things.
 
* If you want to help the development, i prefer that you use -current.
 
* And finally, -current repository may be empty. It's because a new stable release is out.
 
* Note that 14.0 is currently in release candidate stage, so considered as "unstable".
 
 
= Installation =
 
* Format a 8G or more SD card with the Ext2 filesystem. To make explanations clear, name it SLACK.
 
* If you don't know how to format a drive, use GParted under Linux, or run their [http://sourceforge.net/projects/gparted/files/latest/download?source=files Live-CD]. Here's the [http://gparted.sourceforge.net/display-doc.php?name=help-manual manual].
 
* It's highly recommended to have a second partition formated as a swap. 256M or more is a good choice. 512M is wiser is you plan to compile some stuff, or for server use.
 
* If you don't plan to use this partition configuration (OS followed by swap), you'll have to edit the [http://www.tuxfiles.org/linuxhelp/fstab.html /media/SLACK/etc/fstab] after having uncompressed the rootfs.
 
* Grab the latest 14.0 release candidate (unstable) rootfs [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-14.0%2Frootfs here.]
 
Or
 
* Grab the 13.37 (stable) rootfs [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-13.37%2Frootfs here.]
 
* Or the latest -current (unstable) rootfs [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-current%2Frootfs here.] The -current repository may be empty. It's because a new stable release is out.
 
* Uncompress the rootfs on your SD. Be root, using su -, or sudo:
 
sudo tar jxvfp SL4P-[version]-[build].tar.bz2 -C /media/SLACK/ --numeric-owner
 
* If you are one of the last windows users, you can install SL4P using the method nicely provided by ingoreis. Check [http://boards.openpandora.org/index.php?/topic/10548-slackware14rc3-for-pandora-pretty-easy-install-for-windows-users/ this thread.]
 
 
= First run =
 
* Be sure your Pandora's clock is set. Otherwise, your filesystem will be checked.
 
* Power down your Pandora, insert the SD card in the left slot (also called slot 1), and power on your unit.
 
* If you're prompted to enter the root password [[for maintenance]] or to type Ctrl-D, just wait, the unit will restart and check the filesystem automatically.
 
* You will be prompted to choose a password for the root user.
 
* You will be prompted to create an user. At some explicit point, push [up] to put this user in adequate groups.
 
* With 13.37, when you log in as an user, the desktop environment is automatically launched. To disable this feature, remove your .bash_profile, or comment the startx command in it.
 
* Another 13.37 note: connecting with ssh will also launch startx. You can use Ctrl+C to kill it in a very dirty way ^^.
 
 
Bug: very unlikely to happen, but when using startx, you can be blocked at a black screen. Use pandora button + power to reboot.
 
 
= Basic usage =
 
* In order to type commands as root, you have to type su -. You can use just su, but i don't recommend it because you won't have the full root environment.
 
* (13.37) In order to unmount drives or SD cards under Xfce, you have an icon in the bar. You can also manually use pumount as user.
 
* When using adduser, at some explicit point, push [up] to put this user in adequate groups.
 
* To choose a window manager, type xwmconfig.
 
* In some builds, i ship KDE. Avoid selecting it as full desktop on 256M Pandora.
 
* (13.37) When you quit a graphical session, you go back to the console. Type startx to go graphical again.
 
* To power off, or reboot your Pandora when not in Xfce and it's user-friendly menus, be root and type:
 
halt
 
or
 
reboot
 
 
= Basic tools =
 
* To enable or disable services at boot, become root, then type pkgtool, then go in setup -> services, check the option with space then push enter.
 
* Some services are not listed here. For example, to activate the NFS server permanently, tweak /etc/exports and /etc/hosts.allow, then:
 
  chmod +x /etc/rc.d/rc.nfsd
 
  /etc/rc.d/rc.nfsd start (not needed after a reboot)
 
 
= Installing a program - Tools =
 
* Slackware archives are .tgz or .txz .
 
* Slackware uses three powerful tools: installpkg, removepkg and upgradepkg.
 
* A fourth tool named makepkg build packages from compiled sources.
 
 
= Installing a program from source =
 
* The cleanest way to do it is to use a SlackBuild script: http://slackbuilds.org/guidelines/
 
* Many SlackBuilds for Slackware 14.0 are already available here: http://slackbuilds.org/repository/14.0/
 
* Many SlackBuilds for Slackware 13.37 are already available here: http://slackbuilds.org/repository/13.37/
 
* I shipped a tool named sbopkg, which does the job for you. Become root using su -, then run sbopkg, sync it and search for programs.
 
* To use sbopkg with the 14.0, check this before: http://www.linuxquestions.org/questions/slackware-14/slackware64-14-problems-with-compiling-packages-from-slackbuilds-org-4175429712/page2.html#post4795307
 
* Note that Slackware does not check dependencies, so you have to get the right build orders looking here: http://slackbuilds.org/
 
* Also note that gnome libraries must be compiled in a certain order. I already did the job, and shipped them in the rootfs.
 
* If you don't use a SlackBuild script, then the procedure almost always ends like:
 
make install DESTDIR=/tmp/whatever/
 
cd /tmp/whatever/
 
makepkg /tmp/whatever-1.0.0-arm-1.tgz
 
installpkg /tmp/whatever-1.0.0-arm-1.tgz
 
 
= Installing a program with a precompiled archive=
 
* I compiled a lot of packages from http://slackbuilds.org/. You can find 14.0 ones [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-14.0%2Fpackages%2Fextra here], 13.37 ones [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-13.37%2Fpackages%2Fextra here], and -current ones [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-current%2Fpackages%2Fextra here.]
 
* Download what you need, checking the dependencies for your version here:  http://slackbuilds.org/
 
* Put all needed .tgz or .txz in a folder, go root using su -, then type:
 
installpkg /path/to/your/folder/*.t?z
 
 
= About SL4P precompiled archives =
 
* All extra archives are compiled with sbopkg without any modification.
 
* The links to the sources are located here: http://slackbuilds.org/repository/
 
* The building order is fixed in queue files, kind of build playlist.
 
* The queues are located in /var/lib/sbopkg/queues/
 
* About [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-13.37%2Fpackages%2Fshipped shipped] archives, you don't need to download them as they're already in the rootfs, see [http://pandorawiki.org/Software_projects/OS/Slackware/Build-system this.]
 
 
= Updates =
 
* For stable releases, plug the net, become root using su -, then type:
 
slackpkg update
 
slackpkg upgrade-all
 
* Do not do use slackpkg when using a -current. Instead, look at the [ftp://ftp.armedslack.org/slackwarearm/slackwarearm-current/ChangeLog.txt changelog], download packages from [ftp://ftp.armedslack.org/slackwarearm/slackwarearm-current/slackware/ here], become root using su -, then type:
 
upgradepkg /path/to/the/updates/*.t?z
 
* 14.0 updates are notified [ftp://ftp.armedslack.org/armedslack/armedslack-14.0/ChangeLog.txt here.] If you need an up-to-date security, you should consider subscribing to the main Slackware mailing list. Slackware ARM updates are generally available a bit later.
 
* 13.37 updates are notified [ftp://ftp.armedslack.org/slackwarearm/slackwarearm-13.37/ChangeLog.txt here.] If you need an up-to-date security, you should consider subscribing to the main Slackware mailing list. Slackware ARM updates are generally available a bit later.
 
* You can also set up a cronjob. In this case, check /etc/slackpkg/blacklist to ensure some critical packages (ie., kernel) will not be updated.
 
* Slackware usually provides updates during 10+ years, but it seems it's not the case with Slackware ARM. See [http://www.armedslack.org/ the news for more details].
 
 
= SL4P-specific updates =
 
* I provide Pandora fixes, available as Slackware archives.
 
* 14.0 fixes are located [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-14.0%2Fpackages%2Fupdates here.]
 
* 13.37 fixes are located [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-13.37%2Fpackages%2Fupdates here.]
 
* Grab them, become root using su -, then type:
 
upgradepkg --install-new /path/to/the/updates/*.t?z
 
* You don't need to install those updates when using a rootfs build more recent than the update.
 
 
= Installing KDE 4 =
 
* Plug the net, become root using su -, then type:
 
slackpkg update
 
slackpkg install kde
 
* Note that although i already slimmed down KDE configuration files, the 512M Pandora is recommended to run the full desktop.
 
* Anyway, you can run any KDE application (konqueror, kwrite...) flawlessly with the 256M version.
 
* Type xwmconfig to select KDE.
 
 
= Fast boot tweak =
 
* I moved some of the boot stuff (ldconfig, font cache, mime database) in /etc/rc.d/rc.local_shutdown.
 
* The reboot/power off process is slowered, but the OS integrity is safe.
 
 
= Autologin =
 
* The Slim login manager, which is SL4P's default, can automatically log in an user. See /etc/slim.conf .
 
* (13.37) As i didn't succeeded to compile the Slim login manager, no clean auto logger is available at this time.
 
* KDM works, but is too heavy. You have to edit /etc/rc.d/rc.4 in order to use it.
 
 
= PND compatibility list =
 
* SL4P supports .pnd files.
 
* Due to 3.2 kernel and dynamically linked libraries, not all .pnd are compatible.
 
* [[Software_projects/OS/Slackware/PND-compatibility-list|View the PND compatibility list here.]]
 
 
= Automounting a SD card or an USB drive =
 
* No system-wide automounter is enabled for now. It's still a work in progress and not perfect so i don't include this for now.
 
* Only Xfce automounts.
 
* As Xfce mounts devices at insertion, if you booted with a second SD card or an USB drive plugged in, you have to remove, then plug back the device.
 
* If you plan to use Minimenu, you currently have to automount under Xfce, run xwmconfig, then log out to run Minimenu. This is the best method to save RAM.
 
* You can also launch Minimenu under Xfce. Open a terminal and type:
 
mmwrapper -fmmenu
 
 
= Booting another kernel =
 
* I provide kernel updates, and also a real time kernel.
 
* Grab the latest kernel pack from [http://slackware.openpandora.org/pandora/sl4p/sl4p-13.37/packages/index.php?dir=kernels here.]
 
* Install it with:
 
su -
 
upgradepkg --install-new kernels-[yyyymmdd]-arm-1.tgz
 
* You don't need to install those updates when using a rootfs build more recent than the update.
 
* To enable a new kernel, for example 3.2.16-szb4 or the 3.2.14-rt, boot the rootfs, then:
 
cd /boot
 
rm uImage
 
cp uImage-3.2.16-szb4 uImage
 
or:
 
cd /boot
 
rm uImage
 
cp uImage-3.2.14-rt uImage
 
 
And reboot.
 
* If lsmod reports that no modules are loaded (that means, ie., no touchscreen), then run as root:
 
depmod -a
 
 
And reboot again.
 
 
= Firmwares - Realtek Wi-Fi USB dongles =
 
* The realtek Wi-Fi dongles firmwares were missing in 13.37 =< 3, and -current =< 4.
 
* Grab the package [http://slackware.openpandora.org/pandora/index.php?dir=sl4p%2Fsl4p-13.37%2Fpackages%2Ffirmwares here.]
 
* Install it with:
 
su -
 
upgradepkg --install-new realtek-firmware-0.35-1-arm.tgz
 
 
= Suspend and powersaving =
 
* I enabled the USB support by default, therefore, as said Notaz, it "Uses around 3x more power when idle, fails to suspend properly.".
 
* If you want to disable USB support at boot, be root and edit /etc/rc.d/rc.local .
 
Near the top, change
 
modprobe ehci-hcd
 
into a comment:
 
#modprobe ehci-hcd
 
* After that you will have type this command as root, or click on the Xfce USB icon whenever you need USB support.
 
 
= Advanced usage =
 
* I wrote some tutorials to do interesting things.
 
* All those guides are applicable to any version of Slackware, ie. x86, x86_64, IBM mainframe, etc.
 
* Follow this [http://pandorawiki.org/Software_projects/OS/Slackware/Advanced_usage link.]
 
 
= Known -current glitches =
 
* The Network Manager seems to have a problem when trying to connect encrypted Wi-Fi. See [http://boards.openpandora.org/index.php?/topic/7574-rebirth-competition-slackware-for-pandora-release-thread/page__st__100#entry140432 this.]
 
 
= Xfce layout chooser =
 
* The icon is located in "System".
 
* I'm developing it, it's currently in beta stage.
 
* You can save your own Xfce configuration, and load others.
 
* If you want to use it, please use the save feature prior to anything else.
 
* Only one custom layout is available right now.
 
 
= Sources =
 
 
* See the [[{{PAGENAME}}#Build system|build system]], below.
 
 
= Build system =
 
* I distribute it under the GPL 3 license.
 
* It may look a bit messy for now (and indeed, some part have to be cleaned), but it's versatile, as i intended from the start.
 
* It's mainly three bash scripts.
 
* You need a Pandora to run the third one.
 
* Depending on what you comment/uncomment, you can produce an alpha build, very minimal, or a full build.
 
* Depending on what you edit, you can use it to port any *NIX to Open Pandora, and maintain your build very easily.
 
* Get it [http://pandorawiki.org/Software_projects/OS/Slackware/Build-system here], along the more detailed instructions.
 
 
= Ask a question/Report a bug =
 
* You're welcome, and please post here: http://boards.openpandora.org/index.php?/topic/1524-slackware-inside-pandora/
 
  
 
Software projects/OS/Slackware/Advanced usage/NFS
 
Software projects/OS/Slackware/Advanced usage/NFS

Revision as of 12:28, 17 August 2013

Contents

Disclaimer

Hi, this is Linux-SWAT.

Welcome to the SL4P, Slackware for Pandora, Wiki pages.

SL4P is a Slackware ARM overlay. Slackware ARM is the official ARM Slackware port.
Slackware ARM was formerly known as ARMedslack.

The 14.0 release forum page is located here: http://boards.openpandora.org/index.php?/topic/9797-slackware-for-pandora-140/

The technical and -current forum page is located here: http://boards.openpandora.org/index.php?/topic/1524-slackware-inside-pandora/

I'm the maintainer of this Slackware port, and you can find me here: http://boards.openpandora.org/index.php?/user/1035-linux-swat/

If you have questions, i suggest you to share it on the boards, not asking me privately.

Important notes: SL4P is not affiliated in any way with Slackware or Slackware ARM.
Please DO NOT contact any of them if you have problems with it. Contact ME.

SL4P is not affiliated in any way with Open Pandora GmbH or Open Pandora Ltd.
Please DO NOT contact any of them if you have problems with it. Contact ME.

This software is distributed as is. You are on your own responsibility when using it.

I distribute this documentation under the GPL 3 license. http://www.gnu.org/licenses/gpl.html

Helping this project

  • Please consider making a donation.
  • This will help the SL4P project, and also the whole Pandora community, as part of it funds pre-orders.
  • To do so, go to PayPal, log in and click on "Send Money". Donate to donation@openpandora.org and indicate in the PayPal comment field that you are donating for the Slackware project. Then PM me, so i will include you in my thx list ;^).

Older releases Wiki pages

  • To keep this front page clean for the most recent release - 14.0 -, i moved previous versions elsewhere.
  • The old page for the 13.37 release is located here.

Stable or -current ?

  • Stable is for production use, ie. for work, as a server etc..
  • -current is a work in progress. Although it's pretty usable, some things may be broken/unstable.
  • I won't rebuild the 14.0 if there's no big bad bug, i'll just add important features as packages. Of course, official Slackware updates are included.
  • -current rootfs may be smaller or bigger from build to build, as i can include or remove KDE, amongst other things.
  • If you want to help the development, i prefer that you use -current.
  • And finally, -current repository may be empty. It's because a new stable release is out.

Media choice

Installation

Note: if you're a Linux noob, and you're scared by this Wiki page, check this simple tutorial from F_Slim. Thanks to him.
Note: if you are one of the last windows users, you can install SL4P using the method nicely provided by ingoreis. Check this thread.

  • Format a 8G or more SD card with the Ext2 filesystem. To make explanations clear, name it SLACK.
  • If you don't know how to format a drive, use GParted under Linux, or run their Live-CD. Here's the manual.
  • It's highly recommended to have a second partition formated as a swap. 256M or more is a good choice. 512M is wiser is you plan to compile some stuff, or for server use.
  • If you don't plan to use this partition configuration (OS followed by swap), you'll have to edit the /media/SLACK/etc/fstab after having uncompressed the rootfs.
  • If you're cleaning up a previous SL4P installation for a fresh new one, proceed like this:
rm -rf /media/SLACK/*
rm -rf /media/SLACK/.cache/
rm -rf /media/SLACK/.keepdir/
rm -rf /media/SLACK/.splash/
rm -rf /media/SLACK/.subversion/
rm -rf /media/SLACK/.Trash-0/

then unmount, fsck and sync before plugging back the card.

  • To do this, get the SD device name:
cat /proc/mounts

You will see something like:

/dev/sdc1 /media/SLACK ext2
  • Unmount the partition:
umount /media/SLACK/

then check the partition with fsck

fsck -y /dev/sdc1

and sync:

sync
  • Grab the latest 14.0 rootfs here.

Or

  • Grab the latest -current (unstable) rootfs here. The -current repository may be empty. It's because a new stable release is out.
  • Plug back the SD card to remount it.
  • Uncompress the rootfs on your SD. Be root, using su -, or sudo:
sudo tar jxvfp SL4P-[version]-[build].tar.bz2 -C /media/SLACK/ --numeric-owner

First run

  • Be sure your Pandora's clock is set. Otherwise, your filesystem will be checked.
  • Power down your Pandora, insert the SD card in the left slot (also called slot 1), and power on your unit.
  • If you're prompted to enter the root password for maintenance or to type Ctrl-D, just wait, the unit will restart and check the filesystem automatically.
  • You will be prompted to choose a password for the root user.
  • You will be prompted to create an user. At some explicit point, push [up] to put this user in adequate groups.
  • Then you'll be driven to the log in screen. Do not log in as the root user
Bug: very unlikely to happen, but when using startx (not the SL4P default setup), you can be blocked at a black screen.
Use pandora button + power to reboot.

Autologin

  • The Slim login manager, which is SL4P's default, can automatically log in an user. You're asked about it at the first login. Else, see /etc/slim.conf .
  • KDM works, but is too heavy. You have to edit /etc/rc.d/rc.4 in order to use it.

Basic usage

  • In order to type commands as root, you have to type su -. You can use just su, but i don't recommend it because you won't have the full root environment.
  • When using adduser, at some explicit point, push [up] to put this user in adequate groups.
  • To choose a window manager, type xwmconfig.
  • I ship those ones:
Xfce
fluxbox
blackbox
WindowMaker
twm
9wm
enlightenment17
jwm
minimenu
openbox
wmii
  • In some -current or -RC builds, i ship KDE. Avoid selecting it as full desktop on 256M Pandora.
  • To power off, or reboot your Pandora when not in Xfce and it's user-friendly menus, become root with:
su -

and type:

halt

or

reboot

Setting up your language

  • You can set your locale pretty easily. First, you have to know which languages are available, type:
locale -a
  • Choose the one that suits best your need. I highly recommend to use the versions with .utf8 .
  • Then be root and edit /etc/profile.d/lang.sh .
su -
emacs /etc/profile.d/lang.sh
  • You'll have to change this variable with the one you need:

export LANG=en_US.UTF-8

chmod +x /etc/profile.d/lang.sh
  • Save the file and reboot.

Services started at boot

  • To enable or disable services at boot, become root, then type pkgtool, then go in setup -> services, check the option with space then push enter.
  • Some services are not listed here. For example, to activate the NFS server permanently, tweak /etc/exports and /etc/hosts.allow, then:
 chmod +x /etc/rc.d/rc.nfsd
 /etc/rc.d/rc.nfsd start (not needed after a reboot)

Installing a program - Tools

  • Slackware archives are .tgz or .txz .
  • Slackware uses three powerful tools: installpkg, removepkg and upgradepkg.
  • A fourth tool named makepkg build packages from compiled sources.

Installing a program from source

sbopkg -r
  • The sync will take a long time. Once you've done that, run
sh /root/sboflags.sh

to optimize the builds for the Pandora.

  • You have to run this script after every sync. A fistful of programs (like ilbc or lua, which need -fPIC) will still need a bit of tweaking.
  • Then all is set up, you just have to use
sbopkg

and choose "Local SlackBuild" when prompted.

  • When the job is done, remove useless files to save disk space:
rm -rf /tmp/SBo/*
rm -rf /var/cache/sbopkg/*
  • Note that Slackware does not check dependencies, so you have to get the right build orders looking here: http://slackbuilds.org/
  • To check if some of the dependencies are already installed in your system, look in /var/log/packages/ . For example, libgnomecanvas:
ls /var/log/packages/libgnomecanvas*
  • Also note that gnome libraries must be compiled in a certain order. I already did the job, and shipped them in the rootfs.
  • If you don't use a SlackBuild script, then the procedure almost always ends like:
make install DESTDIR=/tmp/whatever/
cd /tmp/whatever/
makepkg /tmp/whatever-1.0.0-arm-1.tgz
installpkg /tmp/whatever-1.0.0-arm-1.tgz

Installing a program with a precompiled archive

  • I compiled a lot (300+) of packages from http://slackbuilds.org/.
  • I shipped a graphical install tool named GSlapt. Launch it with its icon, update the package list, then install what you need, checking the dependencies of your programs here: http://slackbuilds.org/
  • You can also proceed manually. Find 14.0 packages here, and -current ones here.
  • Download what you need, checking the dependencies of your programs here: http://slackbuilds.org/
  • Put all needed .tgz or .txz in a folder, go root using su -, then type:
installpkg /path/to/your/folder/*.t?z
  • Please report any non-working package.

About SL4P precompiled archives

  • All shipped and extra archives are compiled with sbopkg with Pandora-optimized flags.
-DPANDORA -O2 -pipe -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp
  • The links to the sources are located here: http://slackbuilds.org/repository/
  • The building order is fixed in queue files, kind of build playlist.
  • The queues are located in /var/lib/sbopkg/queues/
  • About shipped archives, you don't need to download them as they're already in the rootfs, see this.
  • Some archives won't work, like Kompozer, because it's a repackaging of x86 binaries. As i'm not yet in the process of fine-tuning, i left them for now.

Installing KDE 4

  • Plug the net, become root using su -, then type:
slackpkg update
slackpkg install kde
  • Note that although i already slimmed down KDE configuration files for less eye-candy, the 512M Pandora is recommended to run the full desktop.
  • Anyway, you can run any KDE application (konqueror, kwrite...) flawlessly with the 256M version.
  • Type xwmconfig to select KDE.

Updates

slackpkg update
slackpkg upgrade-all
  • Do not use slackpkg when using a -current. Instead, look at the changelog, download packages from here, become root using su -, then type:
upgradepkg /path/to/the/updates/*.t?z

Note that some packages like a/aaa_elflibs are not supposed to be upgraded in -current. A new rootfs is needed.

  • You can also set up a cronjob. In this case, check /etc/slackpkg/blacklist to ensure some critical packages (ie., kernel) will not be updated.
  • Slackware usually provides updates during 10+ years, but it seems to be less with Slackware ARM. See the news for more details.

SL4P-specific updates

  • I provide Pandora fixes, available as Slackware archives.
  • 14.0 fixes are located here.
  • Grab them, become root using su -, then type:
upgradepkg --install-new /path/to/the/updates/*.t?z
  • You don't need to install those updates when using a rootfs build more recent than the update.

Firefox, Thunderbird, SeaMonkey and Java-OpenJRE/JDK updates

  • Slackware ARM 14.0 doesn't provide anymore updates for Firefox, Thunderbird and SeaMonkey because of a build problem.
  • You have to download the unsupported -current archives and update them manually, using the method mentioned above.
  • Get them here.
  • About Java-OpenJRE/JDK, it's not possible to update them through slackpkg because it was added on-the-fly to Slackware ARM.
  • Check and get the updates here.
  • Be sure to download and update both as the jre is not included in the jdk.

Kernel updates

  • I provide kernel updates, and also a real time kernel.
  • You don't need to install those updates when using a rootfs build more recent than the update.
  • To know which kernel currently runs, type:
uname -r
  • Grab the latest kernel pack from here.
  • Install it with:
su -
upgradepkg --install-new kernels-[yyyymmdd]-arm-1.tgz
  • To enable a new kernel, for example 3.2.30-szfinal or the 3.2.26-rt, do:
cd /boot
rm uImage
cp uImage-3.2.30-szfinal uImage

or:

cd /boot
rm uImage
cp uImage-3.2.26-rt uImage
  • Then link the right modules for the right kernel.
cd /lib/modules
  • Get the current kernel name:
uname -r
  • Remove the current kernel modules link, for example 3.2.30:
rm -rf 3.2.30
  • Now link to the new modules. If the target kernel name contains "dirty", i.e. 3.2.30-dirty-displaylink, keep it in the modules folder name:
ln -s 3.2.30-dirty-displaylink 3.2.30-dirty

And reboot.

  • If lsmod reports that no modules are loaded (that means, eg., no touchscreen), then run as root:
depmod -a

And reboot again.

Automounting a SD card or an USB drive

  • No system-wide automounter is enabled for now. It's still a work in progress and not perfect so i don't include this for now.
  • Only Xfce automounts.
  • As Xfce mounts devices at insertion, if you booted with a second SD card or an USB drive plugged in, you have to click on the device icon.
  • If you plan to use Minimenu, you currently have to automount under Xfce, run xwmconfig, then log out to run Minimenu. This is the best method to save RAM.
  • You can also launch Minimenu under Xfce. Open a terminal and type:
mmwrapper -fmmenu

USB at boot, suspend and powersaving

  • Usually, you have to click on the Xfce "Toggle USB Host" icon whenever you need USB support.
  • I disabled the USB support by default. As said Notaz, it "Uses around 3x more power when idle, fails to suspend properly.".
  • If you want to enable USB host and USB networking support at boot, be root and edit /etc/rc.d/rc.local .

Near the top, change

#modprobe ehci-hcd
#modprobe g_cdc

into:

modprobe ehci-hcd
modprobe g_cdc

Fixing the endless reboot

  • Be sure your Pandora's clock is set. Boot Official Pandora OS on the NAND, and check/set time.
  • Boot SL4P, when prompted to enter the root password for maintenance, do it, then type:
fsck -y /dev/mmcblk0p1

Changing the Hostname

Fast boot tweak

  • I moved some of the boot stuff (ldconfig, font cache, mime database) in /etc/rc.d/rc.local_shutdown.
  • The reboot/power off process is slowered, but the OS integrity is safe.

PND compatibility list

  • SL4P supports .pnd files.
  • PNDs used to be recognized automatically. It's not the case anymore, and i don't know why.
  • So here's the workaround: after the insertion of your SD or USB drive, you have to push the green button near the Xfce menu.
  • Due to 3.2 kernel and dynamically linked libraries, not all .pnd are compatible.
  • View the PND compatibility list here.

Advanced usage

  • I wrote some tutorials to do interesting things.
  • All those guides are applicable to any version of Slackware, ie. x86, x86_64, IBM mainframe, etc.
  • Follow this link.

Xfce layout chooser

  • This is a beta work and may or may not be included in a release.
  • The icon is located in "System".
  • I'm developing it, it's currently in beta stage.
  • You can save your own Xfce configuration, and load others.
  • If you want to use it, please use the save feature prior to anything else.
  • Only one custom layout is available right now.

Sources

Build system

  • I distribute it under the GPL 3 license.
  • It may look a bit messy for now (and indeed, some part have to be cleaned), but it's versatile, as i intended from the start.
  • It's mainly three bash scripts.
  • You need a Pandora to run the third one.
  • Depending on what you comment/uncomment, you can produce an alpha build, very minimal, or a full build.
  • Depending on what you edit, you can use it to port any *NIX to Open Pandora, and maintain your build very easily.
  • Get it here, along the more detailed instructions.

FAQ

Ask a question/Report a bug

  • You're welcome, and please post here or here.

Software projects/OS/Slackware/Advanced usage

Development

Multimedia

Network - Readme

Network

Security

System

Links

Software projects/OS/Slackware/Build-system

Principles

  • It's not a one run and go. You need time and patience if you want a full and complete release. Anyway, you can get a minimal alpha build relatively fast.
  • The target directory is likely to be a SD card. 8G is recommended as a minimum.
  • Phase 1 populates the target directory with the main ARMedslack Linux distribution and some crucial stuff like the Pandora kernel.
  • Phase 2 populates the target directory with parts from official Open Pandora OS and tweaked stuff.
  • A specific part of rc.local is executed during the first boot on a Pandora.
  • The files folder contains tweaked stuff.
  • The pkg folder contains pre-built packages from previous alpha builds.
  • The sources folder contains sources for essential programs.
  • Some proprietary stuff is missing, like 3D drivers. They are useful only if you want to compile your own kernel. Check the Open Pandora git repository for them.

Get the build system

  • Get the archive here.
  • If you don't run a Slackware or a derivative, get the Slackware's installpkg script here. Put it in /sbin and make it executable.

Dependencies

  • You need to download the official Open Pandora rootfs: http://openpandora.org/firmware/pandora-rootfs.tar.bz2
  • Uncompress it as root anywhere and link it to the build directory as "pandora-rootfs".
  • Format a 8G or more SD card with the Ext2 filesystem. To make explanations clear, name it SLACK.
  • If you don't know how to format a drive, use GParted under Linux, or run their Live-CD. Here's the manual.
  • It's highly recommended to have a second partition formated as a swap. 256M or more is a good choice.

Bash knowledge

  • You need minimal bash knowledge in order to understand and succeed. This is a good start.
  • Each script contains comments. Read them.

rc.local

  • rc.local will be copied and executed automatically on the Pandora. You have to tweak it before Phase 1 or Phase 2.
  • Remove simple-comments in order to produce the needed packages during the first boot.
  • Put the SD card in the Pandora, and power it on.
  • The Pandora will build many needed packages, but not all listed, because of some dependencies installed later through sbopkg.
  • You have to edit the OPP="" and MHZ="" variables at the top of the script for your Pandora unit(s). These will only be used during the build phases.

Phase 1

  • Run as su -.
  • You'll see packages errors because it's a first run.

Phase 2

  • Run as su -.
  • Now, you can unmount the card and boot normally this alpha build on the Pandora.

After that first boot

  • The Pandora will power off after having done the job. May last for one hour or two.
  • Remove the card.
  • Save all /media/SLACK/tmp/*.t?z in the local repository listed in the PHASE-2.sh
MYPKGS="$CWD/pkg"

folder of the build system.

In-between steps

  • Plug the net.
  • Launch sbopkg as su -, load the vrac1 queue file, process it saying yes (Q) to options and wait. This is gonna be very long. I really mean very.
  • Do the same with vrac2 and vrac3.
  • Save all /tmp/*.t?z in the
MYPKGSMORE="$CWD/pkg-more"

folder of the build system.

  • Be careful with disk space, you may fill the card. If so, save and erase all /tmp/*.t?z, and sources inside /var/cache/sbopkg/ between queues processing.
  • Note that i include other packages listed in other queue files in my own release. If you plan to do so, move them in MYPKGSMORE="$CWD/pkg-more".

Final step

  • Populate a new SD card, with PHASE-1.sh and PHASE-2.sh
  • Edit /media/SLACK/etc/rc.d/rc.local to build the remaining packages to put in MYPKGS="$CWD/pkg"
  • Put the SD card in the Pandora, and power it on.
  • The Pandora will generate final needed packages.
  • The Pandora will power off after having done the job. May last for one hour or two.
  • Remove the card.
  • Save all /media/SLACK/tmp/*.t?z in YPKGS="$CWD/pkg" folder of the build system.
  • Now, you can create a complete SL4P system.

Creating a compressed rootfs

  • Populate a SD card. Now you should know how to do it ;^).
  • Boot it on a Pandora.
  • Once the Pandora shuts down, remove the card, and follow this procedure.

Special packages

  • In the sources folder, you'll find some programs that aren't automatically generated by the build system.

I don't list those dependencies for now, because i do more useful things ^^.

  • XMMS may just needs libmikmod.
  • Qt3 is a bit long to build. It should be built before the big playlist.

Sources

  • Apart what i already mentioned here, some SL4P part are taken directly from the official Open Pandora OS.
  • Sources are directly related to the build date, ie. if i upload a release the 1st april 2012, so the sources are related to the corresponding Open Pandora OS, rootfs, pandora-firmware, pandora-libraries, etc.
  • Same thing for binaries coming from the official OP rootfs.
  • About pre-compiled packages, shipped or not, grab the sources + SlackBuild accordingly to the version here.
  • If some package version changed, you have access to the old data using sbopkg git repo.

Notes

  • It may look a bit messy for now (and indeed, some part have to be cleaned), but it's versatile, as i intended from the start.
  • Depending on what you comment/uncomment, you can produce an alpha build, very minimal, or a full build.
  • Depending on what you edit, you can use it to port any *NIX to Open Pandora, and maintain your build very easily
  • The -current build system is under work and is not released yet.

Ask a question/Report a bug

projects/OS/Slackware/Advanced usage/Network get started

Network interfaces

  • eth0 is the interface that shows up when you plug an USB to ethernet adapter. A list of compatible ones is located here.
  • wlan0 is the embedded Wi-fi interface.
  • wlan1 (or wlan2, wlan3 etc.) is the name of a Wi-fi dongle.
  • usb0 should be the small USB port (not sure, may be the first plugged).
  • usb1 should be the big USB port (not sure).

Anyway, you can check the physical link connectivity, as root:

ethtool usb0
ethtool usb1
ethtool eth0
  • If you connect an OP with another using an USB cable, the OP at the little end of the cable will dramatically drain the current from the other OP's big USB port.
  • To avoid this, at the little end, type as root:
echo 0 > /sys/class/power_supply/twl4030_usb/enable 
  • With this usb-usb connection, you have to:
rmmod g-cdc
  • To permanently remove this module, edit /etc/rc.d/c.local and change
modprobe g_cdc

into

#modprobe g_cdc
  • There's also a bluetooth interface, but until now i just connected a mouse, so can't tell much about it.
  • These interface numbers (eth0, eth1 etc.) may vary, depending which one you plug first.
  • The numbers can be fixed using the /etc/udev/rules.d/70-persistent-net.rules file.
  • This file is deleted at each shutdown. To make use of it, edit /etc/rc.d/rc.local_shutdown , and comment this line:
rm /etc/udev/rules.d/70-persistent-net.rules

into

#rm /etc/udev/rules.d/70-persistent-net.rules

SL4P default setup

  • The Network Manager, well, manages the connections, and asks for an IP address through a DHCP request. This is how it acts when you boot SL4P for the first time.
  • You can set it up through a right-click on the NM-applet Xfce desktop icon (two little screens at bottom-right).
  • Although it's shipped in the Slackware ARM release, i grabbed and compiled a more recent version.

Slackware alternative setup

  • Wicd is included in the stock Slackware ARM extra packages.
  • I don't include it anymore inside 14.0 but you still can install it, using slackpkg or any other method.
  • I tried it only a bit so i can't recommend it, or not.
  • If you want to give it a try, be root, then install it, and disable the network manager:
chmod -x /etc/rc.d/rc.networkmanager
  • Activate Wicd at boot:
chmod +x /etc/rc.d/rc.wicd
  • Activate Wicd frontend under Xfce. Go in the menu -> Settings -> Session and Startup -> Application Autostart tab, then check "Wicd Network Manager Tray".
  • Reboot.

Slackware default setup

  • Historically speaking, stock Slackware doesn't use the Network Manager, nor Wicd. The network is established at boot, once for all.
  • If you want a non-graphical server-oriented setup, you have to disable the network manager (or Wicd).
chmod -x /etc/rc.d/rc.networkmanager

or

chmod -x /etc/rc.d/rc.wicd
  • Run as root:
netconfig
  • The hostname MUST BE:
darkstar

otherwise you'll break some Pandora scripts compatibility. Sudo won't launch anything with the wrong hostname.

  • Set you parameters.
  • Eventually edit /etc/rc.d/rc.inet1.conf to finalize your setup.
  • Be sure to have all used interfaces plugged in when booting. With the deactivation of the network manager, it's no more plug and play.
  • Reboot.

Older Wiki page

  • 13.37 page is located here.

Software projects/OS/Slackware/Advanced usage/Kernel

Kernel: to recompile or not to recompile ?

  • You don't have to if you don't need to add a new feature.
  • You don't have to if there's no urgent security kernel update.
  • If you want to acquire a lot of global Linux knowledge, or if you are just curious, then yes, just go for it.

Is it simple or complicated to recompile ?

  • Both.
  • But as there's a default kernel configuration file for Open Pandora, it's pretty easy.

Downloading and pre-configuring the latest kernel sources

Directly on the Pandora

  • I wrote a script to automatize the OP kernel sources download and preparation.
  • Plug the net, be root, then:
sh /root/kernel-sync.sh
  • It's very long because of the 16MB/s SD slots throughput.

From a PC

If you prefer to speed up the process and download them from your computer, then proceed like this (assuming your SD card is mounted under /media/SLACK/):

mkdir -p /media/SLACK/usr/src/
cd /media/SLACK/usr/src/

git clone git://openpandora.org/pandora-kernel.git

ln -s pandora-kernel linux

cd pandora-kernel

git checkout --track -b pandora-3.2 origin/pandora-3.2
  • Then boot the pandora, and do this as root:
cd /usr/src/linux
make omap3_pandora_defconfig

The fun part: tweaking

  • The configuration is stored in a hidden file named /usr/src/linux/.config
  • You can use many tools to edit the configuration.
  • The kamikaze way: edit manually the .config . Don't do that.
  • The lazy way: install KDE and use as a user:

gksu make xconfig

  • The common way, which i recommend:

make menuconfig

Menuconfig

  • Kernel options are stored in a tree.
  • Options can be marked as [*] built-in, or <M> module.
  • The vast majority of those options refers to a driver or a functionality.
  • Built-in means inside the kernel, so once the kernel boots, you can't remove or change parameters.
  • Module means you can either add or remove them after the boot. Ever typed "modprobe ehci-hcd" ?
  • The example below is copied from my PC, will copy a real OP one later.
Arrow keys navigate the menu.  <Enter> selects submenus --->.  Highlighted letters are hotkeys.  Pressing <Y> includes, <N>
excludes, <M> modularizes features.  Press <Esc><Esc> to exit, <?> for Help, </> for Search.  Legend: [*] built-in  [ ]
excluded  <M> module  < > module capable 
[*] DMA memory allocation support
General setup  --->
[*] Enable loadable module support  --->
[*] Enable the block layer  --->
Processor type and features  --->
Power management and ACPI options  --->
Bus options (PCI etc.)  --->
Executable file formats / Emulations  --->
[*] Networking support  --->
Device Drivers  --->
Firmware Drivers  --->
File systems  --->
hacking  --->
options  --->
Cryptographic API  --->
Virtualization  --->
Library routines  --->
<Select>    < Exit >    < Help >

A simple tweak

  • Highlight Cryptographic API --->
  • Push [enter]. You're now in the Cryptographic API section.
  • With [space], select all cryptographic algorithms you can. Ensure they are marked as <M>, not <*>.
  • With [right], select < Exit >, then push [enter].
  • Again, with [right], select < Exit >, then push [enter].
  • Now push [enter], saying <Yes> to "Do you wish to save your new configuration ?".
  • You're now ready to compile a kernel which will drive James Bond angrily jealous.

Kernel compilation

  • Be sure you've overclocked your OP to the maximum MHz.
  • At 800MHz, it's a 3+ hours job.
  • Now you can compile it with another custom script:
sh /root/kernel.sh
  • Reboot.

Speed up the compilation time using two or more Pandoras

  • Read this, and set up your Pandoras.
  • Make the adequate changes in /root/kernel-dist.sh with your editor of choice.
  • Then compile with:
sh /root/kernel-dist.sh
  • Reboot.

3D driver

  • So you booted your OP with your brand new kernel, but you can't run 3D apps. Again, two custom scripts for lazy people.
  • Download the sources:
sh /root/3d-get-sources.sh
  • Compile and install them:
sh /root/3d-compile.sh
  • Reboot.

Older Wiki page

  • 13.37 page is located here.

Editing Software projects/OS/Slackware/Advanced usage/RAID

WIP WIP WIP HURRAID

  • Need to properly rebuild one array while completing this Wiki section.
  • For now, don't try this incomplete tutorial unless you have some RAID knowledge
  • Once finished and this warning removed, go for it.

RAID

  • http://en.wikipedia.org/wiki/RAID
  • We will use the robust native Linux software RAID.
  • It's a feature that can be used on the Pandora, so let's have fun with it
  • I will cover here only a RAID 1 (mirror) on two SD cards, as it should be the more interesting for a server usage because under read load, you should reach about 27MB/s against 16MB/s on one card.
  • A SD + USB drive can also work although untested. Same with a two SD + USB drive configuration.
  • This array will be mounted as /srv , the standard server folder.

Partitioning

  • So you have to partition your system SD card a bit differently than the default SL4P setup.
  • In this example, we will use the recommended minimal 8G card for the slot 1.
  • You can use a different sized card for the right slot. To keep thing interesting, the minimum size is 4G for this second card, and we will use 4G in this example.
  • The RAID 1 partitions must have the same exact size.

Card 1

  • Partition that way:
6G ext2 for the system.
256M for the swap.

That's all for now, the third partition will be created under Slackware, and will be:

1.5G RAID.
  • We will left 256M free. NEVER fill an entire drive with a RAID array. Drives, ie. all 8G, doesn't necessary offer the same exact capacity, so you can get in trouble if you add a drive 32MB short.

Card 2

256M for the swap. Having swap on two different cards is a good thing.

That's all for now, the other partitions will be created under Slackware, and will be:

1.5G unformated RAID.
2G unused. Do what you want with it.

Install SL4P

  • Uncompress the rootfs on the first SD card, first partition, put the card in your OP, and boot it.
  • Log in.

Backup /srv

  • As root:
mkdir /srv-save
mv /srv/* /srv-save/

Finalizing card 1 setup

  • If you don't know how to use cfdisk, please read this first.
  • As root:
cfdisk

Finalizing card 2 setup

  • As root:
cfdisk

Create the RAID 1 array

  • Load module ?
  • The RAID devices names are md0, md1, md2 etc..
mdadm --create /dev/md0 --level 1 --raid-devices 2 /dev/mmcblk0p3 /dev/mmcblk1p2

Format the RAID array

  • As usual, we choose the Linux extended 2 filesystem.
mkfs.ext2 /dev/md0

Make the RAID configuration permanent

mdadm --scan > /etc/mdadm.conf

Edit /etc/fstab and add these lines:

/dev/mmcblk1p1   swap   swap   defaults           0  0
/dev/md0         /srv   auto   defaults,noatime   1  1

Final step

  • As root:
mount/dev/md0
mv /srv-save/* /srv/
rm -rf /srv-save/
  • That's it, you have now a RAID 1 array on your Pandora :^).

Some Practice

  • If you want to know how to repair a RAID array, let's simulate a failure.

Remove a drive from the array

  • It's likely to be the one in the right SD slot.
  • Unmount the swap:
swapoff /dev/mmcblk1p1

Repair the array

  • Depending the size of your RAID partition and he data on it, it can take a while.
  • Mount the swap:
swapon /dev/mmcblk1p1

Software projects/OS/Slackware/Advanced usage/Partitioning and formatting

Partitioning and formatting - clarification

  • Partitioning means divide and create zones on a drive.
  • Formatting means creating filesystems in these zones.

Drive names

  • First inserted SD card: /dev/mmcblk0
  • Second inserted SD card: /dev/mmcblk1
  • USB: /dev/sda, dev/sdb, /dev/sdc etc..

Partition names

  • For example, the first partition of each SD card:
  • First SD card: /dev/mmcblk0p1
  • Second SD card: /dev/mmcblk1p1
  • USB: /dev/sda1, /dev/sdb1, /dev/sdc1 etc..

fdisk

  • I don't use fdisk, but it's a widely-installed tool, so consider learning it, and fill this Wiki section.

cfdisk

  • cfdisk is a partitioner.
  • It's a semi-graphical tool. You can visualize the geometry of the drive, although in the console mode.
  • Use the [right] and [left] arrows (D-pad) to move in the menu.
  • Use the [up] and [down] arrows (D-pad) to move in the partitions.
  • Activate with [enter].

Console formating

  • Pretty easy. If you want to format the second partition of your right slot SD card as ext2, just do:
mkfs.ext2 /dev/mmcblk1p2
  • You can format using:
mkfs.cramfs    mkfs.ext4      mkfs.minix     mkfs.reiserfs
mkfs.bfs       mkfs.ext2      mkfs.ext4dev   mkfs.msdos     mkfs.vfat
mkfs.btrfs     mkfs.ext3      mkfs.jfs       mkfs.ntfs      mkfs.xfs

Software projects/OS/Slackware/Advanced usage/PXE boot server

WIP

  • Since august 2011, i'm working on an automatized PXE boot server installation.
  • The goal is to setup a boot server in a few steps, in the same spirit than my SL4P build system.
  • Then you can boot over a network one or more PC with your Pandora.
  • The most known PXE boot server is LTSP.
  • My system works well on PC, the hardest part of the work is done.
  • I need to rework it for the Pandora, it's just a matter of time.

So it's a beta here

-a Pandora
-a 8G SD card
-an USB to ethernet adapter
-a x86 PC PXE-capable
  • You can use a ethernet hub or switch, or connect the OP directly to your PC with a cross cable.
  • What you need to do after having installed SL4P:
-disable or unplug any DHCP server on your network
-plug your USB to ethernet adapter into your OP
-just boot the OP, all is already configured
-boot your PC using PXE
-on the PC, the login is root, and there is no password
-startx will launch Xfce on your PC
  • In the client kernel, i compiled in the most used network cards, like 3com, intel, broadcom, nvidia etc... so it _should_ work on yours.
  • The shutdown of the PC is not handled properly.
  • Be careful if you mount your local hard drive, unmount it before stopping the PC.

Software projects/OS/Slackware/Advanced usage/CUPS

Activate CUPS

chmod +x /etc/rc.d/rc.cups
/etc/rc.d/rc.cups start
  • CUPS will now run at each boot.

Add a printer

  • The simplest way to manage printers with CUPS is to do it through a web browser:
http://127.0.0.1:631

Can be done from the network:

http://ip_of_your_OP:631
  • The login/password are root/your_own_root_password .

Hewlett Packard devices

  • To easily configure a HP device, type as root:
hp-setup
  • Activate HP frontend under Xfce. Go in the menu -> Settings -> Settings Manager -> Session and Startup -> Application Autostart tab, then check "HP System Tray Service".

Software projects/OS/Slackware/Advanced usage/Firewall

Firewall

  • I shipped some default firewall configurations for eth0, wlan0 and usb0. I generated them using the easy firewall generator.
  • I didn't test them, so it's up to you to check it, running services, using nmap from another computer etc..
  • If you want to use a firewall, ie. for eth0, then do:
cp /etc/rc.d/rc.firewall.eth0 /etc/rc.d/rc.firewall
chmod 700 /etc/rc.d/rc.firewall
chmod +x /etc/rc.d/rc.firewall
/etc/rc.d/rc.firewall start

Gateway

  • To use the OP as a simple gateway
chmod +x /etc/rc.d/rc.ip_forward
/etc/rc.d/rc.ip_forward start

NAT Router

  • It also uses a /etc/rc.d/rc.firewall script.
  • I don't provide any because everyone have a different setup.
  • Create it yourself with the easy firewall generator.
  • Then save it as /etc/rc.d/rc.firewall and do this:
chmod 700 /etc/rc.d/rc.firewall
chmod +x /etc/rc.d/rc.firewall
/etc/rc.d/rc.firewall start

QoS

  • For now, a recompiled kernel is necessary.
  • A basic setting consists of packet mangling who changes the ToS field in the packets, through rc.firewall rules. A simple example:
iptables -A PREROUTING -t mangle -p tcp --sport ftp -j TOS --set-tos Minimize-Delay
iptables -A PREROUTING -t mangle -p tcp --dport ftp -j TOS --set-tos Minimize-Delay
iptables -A PREROUTING -t mangle -p tcp --sport ftp-data -j TOS --set-tos Maximize-Throughput
iptables -A PREROUTING -t mangle -p tcp --dport ftp-data -j TOS --set-tos Maximize-Throughput
  • A more advanced setup makes use of dedicated kernel modules. The most known script is the outdated wondershaper.

Software projects/OS/Slackware/Advanced usage/Hardening Jump to: navigation, search

About this document

  • It's a WIP. Security is a huge subject. May take monthes to have something consistent here.
  • I'm not a security expert.

GNU/Linux and free software

  • Slackware, as almost every Linux distribution, is not secured by default. In fact, almost no Linux distribution is shipped with an acceptable security level.
  • It's up to the administrator to work it out to reach the needed security level.
  • When nicely secured, the main danger will come from the administrator's lack of attention.
  • Avoid weakening your network with proprietary OS, even UNIX-based:
There's people who know things about the proprietary OS that you don't know.
  • It means big proprietary vendors can put one hundred backdoors in their OS. When someone finds one, they will release a patch saying "Look at how we are trusty, we patched in less than one day". Still, there's ninety-nine backdoors left for them to sell.
  • Use free software.

The physical access

  • This is the most critical and dangerous vulnerability. When someone can get a physical access to your devices, you're potentially screwed.
  • If you intend to hire or work with someone who calls himself a security expert, ask him what is the most dangerous vulnerability. If he doesn't answer this, throw him away, and far.

The Pandora bootloader

The installed programs

The updates

  • Of course, updates are critical.
  • See this.

The logs

The kernel

  • For a top-level security, you have to recompile your kernel as non-modular, only including the needed options.
  • There's pros and cons about using a long-term stable or a latest kernel. I'm not able to give enlightened advices on this subject.

The users

The groups

The password policy

The network

The devices

  • Following my advice about the physical access, don't let anybody plug any device into your machines, especially USB ones.

The emails

The security tools

  • chkrootkit
  • rkhunter
  • snort
  • Nessus

Software projects/OS/Slackware/Advanced usage/USB graphic

DisplayLink in SL4P 14.0

Release 14.0 of SL4P is prepared for DisplayLink usage. Only a few steps are necessary to enable DisplayLink compatibility:

Step 1: Activate DisplayLink-enabled kernel and modules

Open a terminal and activate the DisplayLink-enabled kernel and modules:

su -

cd /boot
cp uImage-3.2.30-dirty-displaylink uImage

cd /lib/modules
cp -r 3.2.30-dirty-displaylink/* 3.2.30-dirty

reboot

Step 2: First Test

Plug in the DisplayLink adapter, connect the display. Make sure that USB Host is enabled on the Pandora. Then reboot the Pandora. After the reboot, the external display should turn green, as the sign that the DisplayLink driver is active and talking to the DisplayLink adapter. If it does, the first test was successful.


Step 3: Adjust /etc/X11/xorg.conf

Add this block to /etc/X11/xorg.conf

(you should make sure that /dev/fb3 is the correct framebuffer device to use, by reading the dmesg output directly after plugging in the DisplayLink adapter)

################ DisplayLink Stuff ###################
Section "Device"
Identifier "DisplayLinkDevice"
Driver "fbdev"
BusID "USB" # needed to use multiple DisplayLink devices
Option "fbdev" "/dev/fb3" # change to whatever device you want to use
# Option "rotate" "CCW" # uncomment for rotation
EndSection

Section "Monitor"
Identifier "DisplayLinkMonitor"
EndSection

Section "Screen"
Identifier "DisplayLinkScreen"
Device "DisplayLinkDevice"
Monitor "DisplayLinkMonitor"
DefaultDepth 16
EndSection

Then find the Section "ServerLayout" and add a reference to the new screen, e.g. like this:

Screen 0 "DisplayLinkScreen"
Screen 1 "Screen0" LeftOf "DisplayLinkScreen"
Option "Xinerama" "on"


Hints:

  • "Screen0" is the reference to the Pandora screen. I think that's the default identified in SL4P and SuperZaxxon. You may check to make sure it's correct.
  • You may replace "LeftOf" by "RightOf", "Above" or "Below".
  • For cloning, you may experiment with
    Option "Clone" "on"
    . However, this will need adjustment of the DisplayLink display's resolution and probably more, in order to produce a satisfying result. Please document it here, if you find a good solution for cloning.


Optional: Further tweaking of the setup

If you want to change xorg.conf and test the changes without waiting for X with XFCE to start up each time, you may do as a user:

xwmconfig

choose fvwm2

Then as root, edit /etc/inittab, and change:

id:4:initdefault:

into

id:3:initdefault:

Then SL4P boots into text mode, and you can log in and type startx to start X with the much quicker loading fwwm2 window manager. Once you have found a setup you want to use, you may revert the last steps to boot directly into XFCE again.

To Do: Hotplug

We still need to find a satisfactory hotplug solution. Currently, the X server needs to be restarted or a second instance of the X server needs to be launched, in order to make a newly plugged in DisplayLink adapter work.

It seems that real hotplug is not possible with the versions of X and udlfb (kernel): [1]

What would in theory be possible using the hotplug mechanism of Linux, as I understand it, would be, to kill and restart X automatically on every plug / unplug of a DisplayLink device. Of course, this is a really bad hack. Open applications would lose any unsaved data. But I could think of a semi-automatic solution: Whenever hot(un)plug of a DisplayLink adapter is detected, prompt the user to save any unsaved data, and to then hit the "Restart X" button of the prompting dialog.

Work in progress...


Usage hint: Use two instances of the X server

If you modified your xorg.conf as mentioned here in Step 6, it is possible to either start the X server with or without the DisplayLink adapter connected. Either method will work and give a good displaying result.

If you want to plug or unplug the DisplayLink adapter and then adapt the display (e.g.: You worked at home with DisplayLink, then unplug DisplayLink and want to continue our work on the way using just the Pandora screen), there is currently no way around closing the application(s) you worked with, saving your files, restarting the X server and reopening your applications and files.

However, there is at least a method, that makes it a bit easier by avoiding the need to leave X entirely:

Use two instances of the X server:

  • Let the Pandora boot, without DisplayLink connected, into the X environment (i.e. the /etc/inittab modification is not necessary for that method)
  • (work on the Pandora as usual)
  • (then close all applications, that you plan to use with DisplayLink later)
  • Plug in the DisplayLink adapter with the connected display. The display will be green
  • Open a console and type "startx"

--> Another instance of the X server will be started, that uses the DisplayLink-enabled setup and is shown on the external screen. The first X instance won't be visible and usable during the second instance runs.

  • (open your applications again and continue your work on the large screen)
  • (close your applications on the large screen)
  • Click the "exit" icon in the lower right corner and choose "Log out"

--> The 2nd instance of the X server will quit and you are back on the Pandora screen in the first instance of the X server

  • Now you can disconnect the DisplayLink adapter

However, please take care to really quit and restart your applications. Otherwise you may start a second instance of your application on the other screen, maybe load the same file and end up in a big mess with your data files.

SiS USB2VGA adapters

They should work in general, using the sisusbvga / sisusb kernel module and X driver. However, I have not succeeded to make one work in SL4P.

See the proof that it works in theory: http://forum.gp2x.de/viewtopic.php?p=177636#p177636

Software projects/OS/Slackware/Advanced usage/DHCP server

Dnsmask and dhcpd

  • I never used Dnsmask. Seems it's great.
  • dhcpd is the most common dhcp server.

dhcpd

  • Check google for "dhcpd.conf examples".
  • Here's a simple and understandable configuration:
# dhcpd.conf
 
option domain-name "nom_choisi";

option subnet-mask 255.255.255.0;

option domain-name-servers 217.115.138.24 , 192.168.1.3;
ddns-update-style ad-hoc;

option routers 192.168.1.1;

default-lease-time 86400;

max-lease-time 604800;

subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.100 192.168.1.200;
option broadcast-address 192.168.1.255;
}

#host PC-1 {
#hardware ethernet 00:00:4C:72:86:68;
#fixed-address 192.168.1.50;
#}
  • Edit /etc/dhcpd.conf as you need.
  • Note that the network interface has to be configured before running dhcpd on it. So you'll have to comment or remove
/etc/rc.d/rc.networkmanager start

from /etc/rc.d/rc.local , and put something like

ifconfig eth0 11.22.33.44/24

instead, depending on which interface/network address you plan to use.

  • Run dhcpd eth0, dhcpd usb0 or dhcpd usb1 depending which interface you intend to use to deliver dhcp service.
  • Once you got a satisfying configuration, put the command in /etc/rc.d/rc.local , after the fixed adress.

Software projects/OS/Slackware/Advanced usage/ProFTPD

Configuration

Start from inetd

  • Take a look at this.
  • Edit /etc/inetd.conf
  • Uncomment
#ftp     stream  tcp     nowait  root    /usr/sbin/tcpd  proftpd

to

ftp     stream  tcp     nowait  root    /usr/sbin/tcpd  proftpd
  • If the vsftpd line is active, comment it.
  • Be sure that in /etc/proftpd.conf you have:
#ServerType                     standalone                                                                             
ServerType                      inetd

Start as standalone

  • Edit /etc/proftpd.conf
  • Be sure that in /etc/proftpd.conf you have:
ServerType                     standalone                                                                             
#ServerType                      inetd
  • Run proftpd
proftpd

Software projects/OS/Slackware/Advanced usage/VNC

VNC is not a secure protocol

  • So don't use it over an unsecured network, like internet.
  • There are methods to secure VNC, one of the neatest is to drive VNC through a SSH tunnel. Will explain this later.

Pandora as a shared graphical environment client, ie. Xfce

  • Type:
x11vnc --forever --display :0
  • You can now connect from outside, using the port 5900, and manage what is displayed on the real OP screen.
  • To make this permanent under Xfce, go in the menu -> Settings -> Settings Manager -> Session and Startup -> Application Autostart tab, then check "x11vnc".

Pandora as a standalone VNC server

  • As user, launch:
vncserver
  • You're prompted to create a password, then prompted again for a view-only password, ie. for an observer-only.
  • For security reasons, avoid typing the same as those you created for your Linux accounts.
  • Then the vncserver starts and gives you this info:
Log file is /home/user/.vnc/darkstar:1.log
  • The :1 means the server run on graphical server :1 . The normal display you use when you're under, ie. Xfce, is :0 .
  • You can now connect from outside, using the port 5901. If you run a second server :2, you will connect to it using the port 5902, etc..

Pandora as VNC client

13.37%2Fpackages%2Fextra here].

Software projects/OS/Slackware/Advanced usage/Samba

Samba

  • Samba is a file and print server compatible with many OS.
  • The configuration can be basic, and also very fine-tuned.

Configuration

  • The main configuration file is /etc/samba/smb.conf .
  • Man page:
man smb.conf
  • A basic sample:
# Global parameters
[global]
workgroup = WG
server string = Samba Server
security = SHARE
log file = /var/log/samba.%m
max log size = 50
dns proxy = No
wins support = Yes
load printers = Yes
printing = cups
printcap name = cups

[homes]
comment = Home Directories
read only = No
browseable = No

[printers]
comment = All Printers
path = /var/spool/samba
printer = HP3005
public = Yes
guest ok = Yes
printable = Yes
browseable = Yes
create mask = 0777

[print$]
comment = Printer Drivers Share
path = /var/lib/samba/drivers
write list = prof
printer admin = prof

[tmp]
comment = Share the /tmp folder
path = /tmp
read only = No
guest ok = Yes
  • The shipped sample is /etc/samba/smb.conf-sample .

SWAT, Samba Web Administration Tool

  • SWAT is a browser-based configuration tool.
  • It's usually started by inetd. Take a look at this.
  • Edit /etc/inetd.conf and uncomment
#swat           stream  tcp     nowait.400 root /usr/sbin/swat  swat

to

swat           stream  tcp     nowait.400 root /usr/sbin/swat  swat
  • Start inetd. Now you can access SWAT with a web browser.
  • From the OP:
http://127.0.0.1:901
  • Or from outside:
http://ip_of_your_OP:901
  • The login/password are root/your_own_root_password .

Software projects/OS/Slackware/Advanced usage/Virtual machines

Pandora as a QEMU client

The package i compiled does not work. I will provide an older 0.15.1, the same as mcobit QEMU.
You can also recompile it yourself ;): http://wiki.qemu.org/Download
  • I compiled natively QEMU and an optional frontend named AQEMU. You can grab them in the SL4P extra packages repository.
  • AQEMU needs KDE 4 libraries. I will report the needed ones. If you have space on your card, then go for it.
  • As QEMU needs a lot of CPU and RAM, it's a good idea to run it under the fvwm window manager, as it's very light. Of course, you are free to run it under Xfce if you are satisfied with the performance.
  • And to get the optimal experience, launch QEMU with a command-line. See below for some examples.
  • Also, consider disabling all useless services to free the most CPU and RAM you can.

Pandora as a QEMU server

  • You can run one or more headless QEMU instances, and access them through the network, using VNC, or simply ssh. See below for some examples.
  • I recommend that you don't run a window manager, staying in console mode only.
  • Also, consider disabling all useless services to free the most CPU and RAM you can.

Pandora as remote manager

  • With a single Pandora, you can manage a wide range of virtualization technologies, like QEMU-KVM, VirtualBox, VMware, Xen and many other.
  • I compiled libvirt, a virtualization API. You can grab it, along it's dependencies, in the SL4P extra packages repository.

QEMU command-line options

QEMU pnd

  • The mcobit and IngoReis QEMU pnd version works perfectly under Slackware.
  • They provide focused tips for running particular OS, and also a wide choice of pre-installed images. These tips and images are compatible with any QEMU version/host.
  • Check it out there.

Software projects/OS/Slackware/Advanced usage/Inetd

Description

  • Inetd is precious when you want to save as much resources as possible on a server.
  • http://en.wikipedia.org/wiki/Inetd
  • Note that you also have to configure some servers, like vsftpd, if you want them to be run through inetd.

Configuration

  • Edit /etc/inetd.conf .
  • Comment all unnecessary services.
  • Uncomment what you need, or put your own stuff.

Activation

  • To enable it permanently:
chmod +x /etc/rc.d/rc.inetd

Then launch it:

/etc/rc.d/rc.inetd start

Software projects/OS/Slackware/Advanced usage/Distributed compilation

Get started

  • So you need at least two networked Open Pandoras.
  • In this exemple, we'll use two OP, OP-1 and OP-2.
  • The compilation will be launched on OP-1.
  • OP-2 IP adress is 10.0.0.2
  • If you connect two OP with an USB cable, be sure to read this.

Distccd server activation

  • On both OP, launch as root:
distccd

Setting up the hosts

  • On OP-1, open a terminal:
export DISTCC_HOSTS="localhost 10.0.0.2"

Compile

  • In the same OP-1 terminal:
make -j4 CC=distcc
make -j4 CC=distcc
  • In the -j(n), n represents the (number of CPU used X 2), so if you compile with 10 OP, it will be -j20 .

Monitoring

  • You can see how the compilation is distributed.
  • As root on OP-1, type:
distccmon-gnome

Software projects/OS/Slackware/Advanced usage/SSH

Warning

  • If you use a SSH server over internet, or any other unsecured network, you have to use STRONG passwords.
  • Just to be in peace with myself: If you use a SSH server over internet, or any other unsecured network, you have to use STRONG passwords.
  • For your password, be careful of symbols, because if you plan to connect from another country, you may not have them on the keyboard.
  • Also take a look at /etc/ssh/sshd_config , and be sure that the newer protocol is used, and also straight root login is disabled.

Activate the SSH server

chmod +x /etc/rc.d/rc.sshd
/etc/rc.d/rc.sshd start

Keys will be generated. SSH server is now activated at each boot.

SCP

  • You can easily copy files in a very secure way, but i won't cover it here (for now).

SSHFS

  • You can easily mount remote folders in a very secure way, but i won't cover it here (for now).

SSH tunnel

  • You can easily forward remote applications (like VNC) in a very secure way, but i won't cover it here (for now).

Software projects/OS/Slackware/Advanced usage/vsftpd

Configuration

  • Edit /etc/vsftpd.conf .
  • This default configuration file is well-commented.
  • For more options:
man vsftpd.conf

Start from inetd

  • Take a look at this.
  • Edit /etc/inetd.conf
  • Uncomment
#ftp     stream  tcp     nowait  root    /usr/sbin/tcpd  vsftpd                                                        

to

ftp     stream  tcp     nowait  root    /usr/sbin/tcpd  vsftpd    
  • If the proftpd line is active, comment it.
  • Start inetd
  • Be sure that in /etc/vsftpd.conf you have:
 listen=NO

Start as standalone

  • Edit /etc/vsftpd.conf
  • Change
listen=NO

to

listen=YES
  • Run vsftpd
vsftpd

Software projects/OS/Slackware/Advanced usage/Bonding

This is a WIP

About bonding

  • From Wikipedia:

"Link aggregation describe various methods of combining (aggregating) multiple network connections in parallel to increase throughput beyond what a single connection could sustain, and to provide redundancy in case one of the links fails."

  • It's not an addition of the bandwidth, it's a combination.

Is it useful on the Pandora ?

  • Short answer: not really.
  • Long answer: can be useful on very particular cases, like many access to RAM-cached data.
  • As always, it's fun and instructive.

ifenslave

  • This program has to be compiled. It's in the kernel sources. Will provide it sooner or later.

Kernel

  • For now, the kernel have to be recompiled to enable this feature. I will provide one sooner or later.

Module loading

  • The kernel module has to be loaded on each bonded Linux device. As root:
modprobe bonding mode=balance-rr miimon=100

Linking two Pandoras

echo 0 > /sys/class/power_supply/twl4030_usb/enable
  • Create the bonded interface:
ifconfig bond0 up
  • Add the two USB ports to the bond:
ifenslave bond0 usb0
ifenslave bond0 usb1
  • Give a fixed IP address to the bond0 of each Pandora, ie:

ifconfig bond0 10.0.0.1 and on the other OP: ifconfig bond0 10.0.0.2

wip

Software_projects/OS/Slackware/Advanced_usage/Apache

Activate Apache

  • To enable PHP support, edit (as root) /etc/httpd/httpd.conf , and change this line:
#Include /etc/httpd/mod_php.conf

into

Include /etc/httpd/mod_php.conf
  • As root, type:
chmod +x /etc/rc.d/rc.httpd
  • Now, Apache will be started at each boot.
  • Then run:
/etc/rc.d/rc.httpd start

Website

  • Put your http or php pages in /srv/www/htdocs/ .

Software projects/OS/Slackware/Advanced usage/NFS

NFS

  • NFS is the most impressive *NIX networked file server. Accessing a file over the network is as fast as you've had it on your local drive.
  • The standard configuration is pretty simple.
  • If you plan to use it on a bloated network, use tcp connections instead of udp.
  • By default, NFS protocol IS NOT ENCRYPTED. It was designed for LAN. There are methods to use it over internet but i won't describe them here. SSHFS may also be considered instead.

Server side

  • Let's say the IP adress of the server is 10.0.0.250, and the IP of the client is 10.0.0.5 .
  • I already secured the default SL4P connections. To know how, just look /etc/hosts.deny .
  • So you have to allow hosts or networks. Do do this, edit /etc/hosts.allow .
  • Now you have to set up your exports. Edit /etc/exports . Be really careful here, because:
/home/lswat/videos 10.0.0.5(sync,ro)

will work, but

/home/lswat/videos 10.0.0.5 (sync,ro)

will not work. See the space ?

  • And finally activate and run the port mapper:
chmod +x /etc/rc.d/rc.rpc
/etc/rc.d/rc.rpc start

then the NFS server

chmod +x /etc/rc.d/rc.nfsd
/etc/rc.d/rc.nfsd start
  • Those changes are now permanent, so the NFS server will work at next restart.

Client side

  • Create a mount point, ie.:
mkdir -p /mnt/nfs/video-killed-the-radio-star
  • And mount:
mount 10.0.0.250:/home/lswat/videos /mnt/nfs/video-killed-the-radio-star

You may have to specify the file system type:

mount -t nfs 10.0.0.250:/home/lswat/videos /mnt/nfs/video-killed-the-radio-star

Software projects/OS/Slackware/Advanced usage/Image scanning

Permissions

  • In order to use a scanner, you have to give your user(s) the good rights.
  • As root, edit /etc/group , and add your username in the scanner group.
  • Log out from Xfce, log out from the console, log in and type startx.

Usage

  • In the Xfce menu -> Graphics -> XSane
  • You can also open a terminal and type:
xsane

Hewlett Packard devices

  • To easily configure a HP device, type as root:
hp-setup
  • Activate HP frontend under Xfce. Go in the menu -> Settings -> Settings Manager -> Session and Startup -> Application Autostart tab, then check "HP System Tray Service".

Software projects/OS/Slackware/Slackware FAQ

I have no sound

GParted doesn't run

  • As root, edit /usr/share/applications/gparted.desktop, and change:
Exec=gksudo /usr/sbin/gparted %f

into

Exec=gksu /usr/sbin/gparted %f

I messed up the user creation

  • So you can log in as root. Open a terminal and type:
adduser

Can't see any .pnd

  • Click on the green icon near the Xfce menu.

Still can't see any .pnd

  • You forgot to add your user in the right groups. Edit /etc/group and add yourself to:
audio cdrom floppy plugdev video power netdev lp scanner

I want USB enabled at boot

  • Edit /etc/rc.d/rc.local , and uncomment:
#modprobe ehci-hcd

into

modprobe ehci-hcd

Can't set the battery monitor to display time left

  • Left-click anywhere on the center of the Xfce menu bar.
Panel-->Panel Preferences-->Items-->Battery Monitor

Emulators and Games icons are the same

  • It's because freedesktop menus are crap. I lost days trying to set them up.

Wi-Fi works only once

  • Apply this tweak. It will be corrected in next release (14.0-2), and it's faster to correct manually than using a patch.

= Sometimes, i can't unmount a drive"

  • Launch Thunar (the file manager), and click on the "eject" icon.

SSL doesn't work

  • Set your time/date correctly.

Cursor moves strangely when i use the touchscreen

  • It's a bug, probably from GTK. I don't know how to fix it yet.

Software projects/OS/Slackware/Advanced usage/Kernel-13.37

Kernel: to recompile or not to recompile ?

  • You don't have to if you don't need to add a new feature.
  • You don't have to if there's no urgent security kernel update.
  • If you want to acquire a lot of global Linux knowledge, or if you are just curious, then yes, just go for it.

Is it simple or complicated to recompile ?

  • Both.
  • But as there's a default kernel configuration file for Open Pandora, it's pretty easy.

Downloading and pre-configuring the latest kernel sources

  • Plug the net, be root, then:
mkdir -p /usr/src/
cd /usr/src/
git clone git://openpandora.org/pandora-kernel.git
ln -s pandora-kernel linux
cd pandora-kernel
git checkout --track -b pandora-3.2 origin/pandora-3.2
make omap3_pandora_defconfig

The fun part: tweaking

  • The configuration is stored in a hidden file named /usr/src/linux/.config
  • You can use many tools to edit the configuration.
  • The kamikaze way: edit manually the .config . Don't do that.
  • The lazy way: install KDE and use:

make xconfig

  • The common way, which i recommend:

make menuconfig

Menuconfig

  • Kernel options are stored in a tree.
  • Options can be marked as [*] built-in, or <M> module.
  • The vast majority of those options refers to a driver or a functionality.
  • Built-in means inside the kernel, so once the kernel boots, you can't remove or change parameters.
  • Module means you can either add or remove them after the boot. Ever typed "modprobe ehci-hcd" ?
  • The exemple below is copied from my PC, will copy the real OP one later.
Arrow keys navigate the menu.  <Enter> selects submenus --->.  Highlighted letters are hotkeys.  Pressing <Y> includes, <N>
excludes, <M> modularizes features.  Press <Esc><Esc> to exit, <?> for Help, </> for Search.  Legend: [*] built-in  [ ]
excluded  <M> module  < > module capable 
[*] DMA memory allocation support
General setup  --->
[*] Enable loadable module support  --->
[*] Enable the block layer  --->
Processor type and features  --->
Power management and ACPI options  --->
Bus options (PCI etc.)  --->
Executable file formats / Emulations  --->
[*] Networking support  --->
Device Drivers  --->
Firmware Drivers  --->
File systems  --->
hacking  --->
options  --->
Cryptographic API  --->
Virtualization  --->
Library routines  --->
<Select>    < Exit >    < Help >

A simple tweak

  • Highlight Cryptographic API --->
  • Push [enter]. You're now in the Cryptographic API section.
  • With [space], select all cryptographic algorithms you can. Ensure they are marked as <M>, not <*>.
  • With [right], select < Exit >, then push [enter].
  • Again, with [right], select < Exit >, then push [enter].
  • Now push [enter], saying <Yes> to "Do you wish to save your new configuration ?".
  • You're now ready to compile a kernel which will drive James Bond angrily jealous.

Kernel compilation

  • Be sure you've overclocked your OP to the maximum MHz.
  • At 800MHz, it's a 3+ hours job.
  • Now you can compile it with:
cd /usr/src/linux/
make clean
make uImage
make modules
make modules_install
rm /boot/uImage
cp arch/arm/boot/uImage /boot/uImage
  • Reboot.

Speed up the compilation time using two or more Pandoras

  • Read this, and set up your Pandoras.
  • Then compile, replacing previous related commands with:
make -j4 CC=distcc uImage
make -j4 CC=distcc modules

In the -j(n), n represents the (number of CPU used X 2), so if you compile with 10 OP, it will be -j20 .

3D driver

  • As it's not open source, you have to grab it on the Texas Instruments website.
  • More on this later.

Software projects/OS/Slackware/Advanced usage/Non-Free codecs

Warning

  • I hate to write things like this following tutorial, but sometimes it's necessary to use non-Free stuff, e.g. for work.

Setting up sbopkg

Creating the build list

  • As root, create /var/lib/sbopkg/queues/nonfree.sqf
  • Fill it with this:
amrnb
amrwb
faac
lame
libdvdcss
ffmpeg
  • Edit /var/lib/sbopkg/SBo/14.0/multimedia/ffmpeg/ffmpeg.SlackBuild.sbopkg, and add the -fPIC flag after the two -mfloat-abi=softfp
  • Launch sbopkg, load the queue and proceed with local SlackBuilds.
  • Please note that ffmpeg is free software, but it has to be recompiled in order to use this crappy non-Free stuff.

Recompiling MPlayer2

  • Install python3 .
export CFLAGS="-DPANDORA -O2 -pipe -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp"
export CXXFLAGS="-DPANDORA -O2 -pipe -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp"

git clone git://github.com/pder/mplayer2-build.git
cd mplayer2-build
git submodule init
git submodule update

cd mplayer2-build/mplayer
rm -rf /tmp/build/*
./configure --disable-libdvdcss-internal \
            --prefix=/usr \
            --mandir=/usr/man \
            --confdir=/etc/mplayer \
            --codecsdir=/usr/lib/codecs \
            --language=all
make
make install DESTDIR=/tmp/build

cd /tmp/build
removepkg /var/log/packages/MPlayer*
makepkg -c y /tmp/MPlayer2-201212-arm-1.tgz
installpkg /tmp/MPlayer2-201212-arm-1.tgz
  • Please note that MPlayer2 is free software, but it has to be recompiled in order to use this crappy non-Free stuff.

Software projects/OS/Slackware/Advanced usage/VPN

VPN

  • From Wikipedia: "A virtual private network (VPN) is a secure network that uses primarily public telecommunication infrastructures, such as the Internet, to provide remote offices or traveling users an access to a central organizational network."
  • It means you can establish a secured LAN over the internet.

OpenVPN

  • It's shipped in the stock Slackware, so you just have to configure and run it.
  • Check the one and only tutorial here.

Software projects/OS/Slackware/Advanced usage/Hostname

Changing the hostname

  • As root, type:
netconfig
  • Now you have to edit /etc/sudoers . You have to use visudo or nano, otherwise some editors may change the permissions of this file, therefore disable sudo commands.
nano /etc/sudoers
  • Change all "darkstar" into the hostname you've choosen.
  • Sudoers permissions _must_ be:
ls -lsa /etc/sudoers
-r--r----- 1 root root
  • In case you changed the permissions, do this:
chmod 0440 /etc/sudoers
chown 0.0 /etc/sudoers

Software projects/OS/Slackware/Advanced usage/Network get started-13.37

Network interfaces

  • eth0 is the interface that shows up when you plug an USB to ethernet adapter. A list of compatible ones is located here.
  • wlan0 is the embedded Wi-fi interface.
  • wlan1 is the name of a Wi-fi dongle.
  • usb0 is the small USB port (not sure, may be the first plugged).
  • usb1 is the big USB port (not sure).

Anyway, you can check the physical link connectivity, as root:

ethtool usb0
ethtool usb1
ethtool eth0
  • If you connect an OP with another using an USB cable, the OP at the little end of the cable will dramatically drain the current from the other OP's big USB port.
  • To avoid this, at the little end, type as root:
echo 0 > /sys/class/power_supply/twl4030_usb/enable 
  • With this usb-usb connection, you have to:
rmmod g-cdc
  • There's also a bluetooth interface, but until now i just connected a mouse, so can't tell much about it.
  • These interface numbers (eth0, eth1 etc.) may vary, depending which one you plug first.
  • The numbers can be fixed using the /etc/udev/rules.d/70-persistent-net.rules file.
  • This file is deleted at each shutdown. To make use of it, edit /etc/rc.d/rc.local_shutdown , and comment this line:
rm /etc/udev/rules.d/70-persistent-net.rules

into

#rm /etc/udev/rules.d/70-persistent-net.rules

SL4P default setup

  • The Network Manager, well, manages the connections, and asks for an IP address through a DHCP request. This is how it acts when you boot SL4P for the first time.
  • You can set it up through a right-click on the Xfce desktop icon.
  • It's not included in the stock Slackware-13.37, so i compiled and shipped it.
  • It's now part of the 14.0 and onwards.

Slackware friendly setup

  • Wicd is included in the stock Slackware extra packages, and i shipped it in SL4P 13.37.
  • I don't include it anymore inside 14.0 but you still can install it, using slackpkg or any other method.
  • I tried it only a bit so i can't recommend it, or not.
  • If you want to give it a try, be root, then install it, and disable the network manager. Edit /etc/rc.d/rc.local and comment at the end:
/etc/rc.d/rc.networkmanager start

into

#/etc/rc.d/rc.networkmanager start
  • Activate Wicd at boot:
chmod +x /etc/rc.d/rc.wicd
  • Activate Wicd frontend under Xfce. Go in the menu -> Settings -> Session and Startup -> Application Autostart tab, then check "Wicd Network Manager Tray".
  • Reboot.

Slackware default setup

  • Stock Slackware doesn't use the Network Manager, nor Wicd. The network is established at boot, once for all.
  • If you want a non-graphical server-oriented setup, you have to disable the network manager (and Wicd). Edit /etc/rc.d/rc.local and comment at the end:
/etc/rc.d/rc.networkmanager start

into

#/etc/rc.d/rc.networkmanager start
  • Run as root:
netconfig
  • The hostname MUST BE:
darkstar

otherwise you'll break some Pandora scripts compatibility. Sudo won't launch anything with the wrong hostname.

  • Set you parameters.
  • Edit /etc/rc.d/rc.inet1.conf to finalize your setup.
  • Be sure to have all used interfaces plugged in when booting. With the deactivation of the network manager, it's no more plug and play.
  • Reboot.

Software projects/OS/Slackware/Advanced usage/Rootkit scanners

What is a rootkit ?

  • Check the Wikipedia definition here.

How to scan them ?

  • I ship two tools for this purpose: chkrootkit and rkhunter.
  • Their utilization is pretty simple, and i'll let you read their man pages.

Something to know

  • It's a pretty bad idea to run a self-test on a machine, because if it's already compromised, embedded security tools may also have been hacked.
  • The best option is to check the target drive (the suspicious one) on a clean machine. This target drive SHOULD be mounted as read-only.

The Pandora way

  • So to check a SD card, or a USB drive, don't use Xfce, as it will automount as read-write the target drive.

Note

  • During a scan, you will likely encounter false positives (false warnings). This can be harmless. Don't blindly stress, keep cool, and analyze the results.

Software projects/OS/Slackware/Advanced usage/System encryption

System encryption