Difference between revisions of "Controllers"

From Pandora Wiki
Jump to: navigation, search
(→‎PRECAUTION)
(added link to x360 program on repo)
 
(13 intermediate revisions by 4 users not shown)
Line 1: Line 1:
−
This includes instructions on installing software and configuration to pair Nintendo Wii Wiimotes using Bluetooth to the Pandora, and using them as joystick controllers. This was done under the base install of Angstrom Linux provided on the Pandora, using Hotfix 4. This does not include setting up a sensor bar type setup, but should allow you to use classic controllers that plug into the Wiimote.
+
==Nintendo Wiimote==
  
−
== PRECAUTION ==
+
This includes instructions on installing software and configuration to pair Nintendo Wii Wiimotes using [[Bluetooth]] to the Pandora, and using them as joystick controllers. This was done under the base install of Angstrom Linux provided on the Pandora, using Hotfix 4. This does not include setting up a sensor bar type setup, but should allow you to use classic controllers that plug into the Wiimote.
  
−
Updating the list of packages (the command "sudo opkg update") should not affect your Pandora. However, upgrading or installing some packages may update core files on the Pandora and cause instability or prevent your Pandora from booting (requiring a reflash of your system).
+
=== Installing the Drivers ===
  
−
These instructions worked in Hotfix 4 and 5. When Hotfix 5 was released, the update took 30 minutes to complete.
+
Open a Terminal, and run the command
 +
<source lang="bash">sudo opkg update</source>
 +
It will give you a warning about responsibility, and asks for your user password. This will update the Angstrom packages stored on [[NAND]].
  
−
== Installing the Drivers ==
+
Then install the Wiimote drivers and software, cwiid, using the command
 +
<source lang="bash">sudo opkg install cwiid</source>
  
−
Open a Terminal, and run the command "sudo opkg update" (without the quotes). It will give you a warning about responsibility, and asks for your user password. This will update the Angstrom packages stored on NAND.
+
=== Pairing the Wiimote ===
  
−
Then install the Wiimote drivers and software, cwiid, using the command "sudo opkg install cwiid"
+
Make sure [[Bluetooth]] is enabled. In Hotfix 4, there's a script to "Toggle Bluetooth Status" in the Pandora menu under the "System" category. A light will turn on on the left hand side of the Pandora if [[Bluetooth]] is on, next to the network light.
  
−
== Pairing the Wiimote ==
+
Open a Terminal, and run the command and follow the directions.
−
 
+
<source lang="bash">wminput</source>
−
Make sure Bluetooth is enabled. In Hotfix 4, there's a script to "Toggle Bluetooth Status" in the Pandora menu under the "System" category. A light will turn on on the left hand side of the Pandora if Bluetooth is on, next to the network light.
+
It will tell you to press 1+2 on the Wiimote to connect. On my Wiimotes, the lights flash and the fourth light on the Wiimote lights solid once paired. If you then quit the wminput application (for instance, by hitting CTRL-C), your Wiimote will un-pair and turn off. I usually just hide the Terminal in the background by minimizing the window while I run game emulators.
−
 
 
−
Open a Terminal, and run the command "wminput" and follow the directions. It will tell you to press 1+2 on the Wiimote to connect. On my Wiimotes, the lights flash and the fourth light on the Wiimote lights solid once paired. If you then quit the wminput application (for instance, by hitting CTRL-C), your Wiimote will un-pair and turn off. I usually just hide the Terminal in the background by minimizing the window while I run game emulators.
 
  
 
You can pair multiple Wiimotes, just run wminput a second time and follow the instructions to pair it. I only have two, and both lit the fourth light.
 
You can pair multiple Wiimotes, just run wminput a second time and follow the instructions to pair it. I only have two, and both lit the fourth light.
  
−
In PicoDrive, the Sega Genesis emulator, in the controller settings, if you push left or right it will display different joysticks configured. You can set up the buttons for different players there. The Wiimotes appeared as joysticks 1 and 2, in the order in which I paired them.
+
In [[PicoDrive]], the Sega Genesis emulator, in the controller settings, if you push left or right it will display different joysticks configured. You can set up the buttons for different players there. The Wiimotes appeared as joysticks 1 and 2, in the order in which I paired them.
  
−
== Changing the Wiimote Configuration ==
+
=== Changing the Wiimote Configuration ===
  
−
You can edit ''/etc/cwiid/wminput/default'' and ''/etc/cwiid/wminput/buttons'' to map the buttons of the Wiimote. You should quit wminput and restart them for these changes to take effect. They are plain text files. I edited them using vim from the command line, which is not the most user friendly thing to describe. Because they're system files, I needed to use sudo again, so I ran "sudo vim /etc/cwiid/wminput/default" in Terminal.
+
You can edit ''/etc/cwiid/wminput/default'' and ''/etc/cwiid/wminput/buttons'' to map the buttons of the Wiimote. You should quit wminput and restart them for these changes to take effect. They are plain text files. I edited them using vim from the command line, which is not the most user friendly thing to describe. Because they're system files, I needed to use sudo again, so I ran
 +
<source lang="bash">sudo vim /etc/cwiid/wminput/default</source>
  
 
By default, the Wiimote is set up to control the mouse with the accelerometer. This means, as you tilt the Wiimote left and right, your mouse will shift around. I found it a bit distracting, and so I commented out two lines in /etc/cwiid/wminput/default so they look like this:
 
By default, the Wiimote is set up to control the mouse with the accelerometer. This means, as you tilt the Wiimote left and right, your mouse will shift around. I found it a bit distracting, and so I commented out two lines in /etc/cwiid/wminput/default so they look like this:
  
−
: #Plugin.acc.X  = REL_X
+
<pre>
−
: #Plugin.acc.Y  = REL_Y
+
#Plugin.acc.X  = REL_X
 +
#Plugin.acc.Y  = REL_Y
 +
</pre>
  
 
Also, I use the Wiimote "sideways", like a traditional Nintendo controller. I changed the direction pad to reflect this. Though you can do that within emulator configurations, it seemed handier to just have that set up by default. To do this, make these changes in /etc/cwiid/wminput/buttons
 
Also, I use the Wiimote "sideways", like a traditional Nintendo controller. I changed the direction pad to reflect this. Though you can do that within emulator configurations, it seemed handier to just have that set up by default. To do this, make these changes in /etc/cwiid/wminput/buttons
  
−
: Wiimote.Up      = KEY_LEFT
+
<pre>
−
: Wiimote.Down    = KEY_RIGHT
+
Wiimote.Up      = KEY_LEFT
−
: Wiimote.Left    = KEY_DOWN
+
Wiimote.Down    = KEY_RIGHT
−
: Wiimote.Right  = KEY_UP
+
Wiimote.Left    = KEY_DOWN
 +
Wiimote.Right  = KEY_UP
 +
</pre>
  
 
It is also possible to map the Wiimote or extension buttons to a virtual gamepad. See below for instructions.
 
It is also possible to map the Wiimote or extension buttons to a virtual gamepad. See below for instructions.
  
−
== Using a Classic Controller ==
+
== Nintendo Wii Classic Controller ==
  
 
There are two ways to use a Wiimote or Classic Controller with the Pandora:
 
There are two ways to use a Wiimote or Classic Controller with the Pandora:
Line 51: Line 57:
  
 
The default profile doesn't have classic controller buttons defined, but cwiid comes with a gamepad profile which does. You can load it in wminput like this using a terminal:
 
The default profile doesn't have classic controller buttons defined, but cwiid comes with a gamepad profile which does. You can load it in wminput like this using a terminal:
−
: wminput -c gamepad
+
<source lang="bash">wminput -c gamepad</source>
 
Then connect your Wiimote and Classic Controller. You do not have to connect the Classic Controller before you connect the Wiimote.
 
Then connect your Wiimote and Classic Controller. You do not have to connect the Classic Controller before you connect the Wiimote.
  
−
However the analog sticks/dpad seemed to be set up wrong in the gamepad profile:
+
However the analog sticks/dpad seemed to be set up wrong in the gamepad profile (''/etc/cwiid/wminput/gamepad''):
−
: Classic.Dpad.X = ABS_X
+
<pre>
−
: Classic.Dpad.Y = ABS_Y
+
Classic.Dpad.X = ABS_X
−
: Classic.LStick.X = ABS_HAT0X
+
Classic.Dpad.Y = ABS_Y
−
: Classic.LStick.Y = ABS_HAT0Y
+
Classic.LStick.X = ABS_HAT0X
−
: Classic.RStick.X = ABS_HAT1X
+
Classic.LStick.Y = ABS_HAT0Y
−
: Classic.RStick.Y = ABS_HAT1Y
+
Classic.RStick.X = ABS_HAT1X
 +
Classic.RStick.Y = ABS_HAT1Y
 +
</pre>
  
 
should be replaced with:
 
should be replaced with:
−
: Classic.Dpad.X = ABS_HAT0X
+
<pre>
−
: Classic.Dpad.Y = ABS_HAT0Y
+
Classic.Dpad.X = ABS_HAT0X
−
: Classic.LStick.X = ABS_X
+
Classic.Dpad.Y = ABS_HAT0Y
−
: Classic.LStick.Y = ABS_Y
+
Classic.LStick.X = ABS_X
−
: Classic.RStick.X = ABS_RX
+
Classic.LStick.Y = ABS_Y
−
: Classic.RStick.Y = ABS_RY
+
Classic.RStick.X = ABS_RX
 +
Classic.RStick.Y = ABS_RY
 +
</pre>
  
 
Otherwise, you won't get proper analog input from the sticks, since PoV hats aren't analog.
 
Otherwise, you won't get proper analog input from the sticks, since PoV hats aren't analog.
Line 77: Line 87:
  
 
Here is the profile for the Pandora gaming controls:
 
Here is the profile for the Pandora gaming controls:
−
: # D-Pad
+
<pre>
−
: Classic.Up = KEY_UP
+
# D-Pad
−
: Classic.Down = KEY_DOWN
+
Classic.Up = KEY_UP
−
: Classic.Left = KEY_LEFT
+
Classic.Down = KEY_DOWN
−
: Classic.Right = KEY_RIGHT
+
Classic.Left = KEY_LEFT
 +
Classic.Right = KEY_RIGHT
  
−
: # Select, Start and Space
+
# Select, Start and Space
−
: Classic.Minus = KEY_LEFTCTRL
+
Classic.Minus = KEY_LEFTCTRL
−
: Classic.Plus = KEY_LEFTALT
+
Classic.Plus = KEY_LEFTALT
−
: Classic.Home = KEY_SPACE
+
Classic.Home = KEY_SPACE
  
−
: # BXYA on Pandora
+
# BXYA on Pandora
−
: Classic.A = KEY_END
+
Classic.A = KEY_END
−
: Classic.B = KEY_PAGEDOWN
+
Classic.B = KEY_PAGEDOWN
−
: Classic.X = KEY_PAGEUP
+
Classic.X = KEY_PAGEUP
−
: Classic.Y = KEY_HOME
+
Classic.Y = KEY_HOME
−
: Classic.ZL = KEY_Q
+
Classic.ZL = KEY_Q
−
: Classic.ZR = KEY_P
+
Classic.ZR = KEY_P
−
: Classic.L = KEY_RIGHTSHIFT
+
Classic.L = KEY_RIGHTSHIFT
−
: Classic.R = KEY_RIGHTCTRL
+
Classic.R = KEY_RIGHTCTRL
 +
</pre>
  
 
Save that in /etc/cwiid/wminput - you can name it whatever you want, as long as you load it in wminput using "wminput -c filename" - and make sure to save it using UNIX line endings (LF).
 
Save that in /etc/cwiid/wminput - you can name it whatever you want, as long as you load it in wminput using "wminput -c filename" - and make sure to save it using UNIX line endings (LF).
Line 102: Line 114:
 
Once the profile is loaded and your Wiimote/Classic Controller is connected, it will automatically work in some games, but not in others. This might be possible to change to work in all games by modifying the wminput source code.
 
Once the profile is loaded and your Wiimote/Classic Controller is connected, it will automatically work in some games, but not in others. This might be possible to change to work in all games by modifying the wminput source code.
  
−
== Extra Information ==
+
=== Extra Information ===
  
 
* [http://abstrakraft.org/cwiid/browser/wminput/action_enum.txt List of bindable buttons, axises and keys for wminput]
 
* [http://abstrakraft.org/cwiid/browser/wminput/action_enum.txt List of bindable buttons, axises and keys for wminput]
 +
 +
== MS Xbox360 controller ==
 +
[http://repo.openpandora.org/?page=detail&app=xboxdriver repo link]
 +
[http://boards.openpandora.org/index.php?/topic/430-xboxdrv-support-for-xbox-and-xbox-360-wired-and-wireless-controllers/ forum link]
 +
 +
 +
== Sony PS3 controller ==
 +
[http://boards.openpandora.org/index.php?/topic/1136-sony-ps3-wireless-controller-and-pandora/ link]
 +
 +
== OUYA Controller ==
 +
 +
The OUYA controller plays extremely well with the Pandora. As with the Wii controller above, many games that support joystick input will work automatically or by using in game mappers. For most other games, [http://repo.openpandora.org/?page=detail&app=qjoypad-001 QJoyPad] allows the OUYA controller to mimic the Pandora controls. The controller has enough excess buttons to map keys that are helpful in navigation, such as Enter, Escape, Start, Select, and Right Click.
 +
 +
The touch pad on the OUYA controller can control mouse movement and perform Left Click/Drag.
 +
 +
=== How to Connect ===
 +
 +
1. Turn on Bluetooth Hardware.
 +
 +
2. Hold down the OUYA button on the gamepad(s) until two lights are flashing.
 +
 +
3. Enter the following into a terminal:
 +
<source lang ="bash">hcitool scan</source>
 +
Output should look like:
 +
<source lang="bash">AD:DR:ES:SO:UY:A1          Broadcom Keyboard
 +
AD:DR:ES:SO:UY:A2          Broadcom Keyboard1</source>
 +
4. Then, for each of the controllers you would like to pair, use the hidd command with the address output from your terminal. For example, the first controller listed above:
 +
<source lang="bash">sudo hidd --connect AD:DR:ES:SO:UY:A1</source>
 +
If all goes well, there should be no output, and the first light on the controller should be lit.
 +
 +
== Mayflash GameCube to USB Adaptor ==
 +
 +
These adapters must be plugged in through a USB 2.0 hub, but are plug n' play after that. As with other controllers, QJoyPad is necessary for some programs in order to mimic the  Pandora Controls.
 +
 +
== Program Specific Compatibility ==
 +
 +
After a controller is paired and found to be working with the Pandora, the following compatibility list can be used as a guide:
 +
 +
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
 +
|- style="background: #ececec"
 +
! Program
 +
! Link
 +
! Button Mapping
 +
! [http://repo.openpandora.org/?page=detail&app=qjoypad-001 QJoyPad] Compatible
 +
! Additional comments
 +
|-
 +
| DraStic
 +
| [http://repo.openpandora.org/?page=detail&app=DraStic repo]
 +
| {{No}}
 +
| {{No}}
 +
| No method found yet for using external controllers
 +
|-
 +
| PanMAME
 +
| [http://repo.openpandora.org/?page=detail&app=panmame-advmenu-7927 repo]
 +
| {{Yes}}
 +
| n/a
 +
|
 +
|-
 +
| SNES9x EX+
 +
| [http://repo.openpandora.org/?page=detail&app=com.explusalpha.Snes9xPlus repo]
 +
| {{Yes}}
 +
| n/a
 +
| Custom key maps work great. Bluetooth controller input does not currently prevent the Pandora from going to low poer mode, and the emulator will begin to freeze after the Pandora thinks that it is idle and turns on power saving. Suggest turning off idling power save while you play with a controller.
 +
|-
 +
| Not Tetris
 +
| [http://repo.openpandora.org/?page=detail&app=nottetris_ptitseb repo]
 +
| {{No}}
 +
| {{Yes}}
 +
| QJoyPad works fine. Map Escape and Enter to help with pausing and selections.
 +
|-
 +
| Flying Snake
 +
| [http://repo.openpandora.org/?page=detail&app=flyingsnake_undexsym repo]
 +
| {{No}}
 +
| {{Yes}}
 +
| QJoyPad works fine. Map Start in order to help you begin a new round.
 +
|-
 +
| Mini Slug Project
 +
| [http://repo.openpandora.org/?page=detail&app=minislug_ptitseb repo]
 +
| {{Maybe | Works with issues}}
 +
| {{No}}
 +
| Game auto maps the OUYA controller fine, but maps the directional to the left stick. Have not found a way to use the D-Pad. QJoyPad is ignored.
 +
|-
 +
| Mupen64plus v2.1
 +
| [http://repo.openpandora.org/?page=detail&app=mupen64plus repo]
 +
| {{Yes}}
 +
| n/a
 +
| If your controller is not already supported, it can be mapped by editing InputAutoConfig.ini - OUYA controllers and Mayflash GameCube-to-USB can be mapped and auto-detected using the following [https://drive.google.com/file/d/0B7nHCkhKNgw3cXhNVlc0WldGSUk/view?usp=sharing InputAutoCfg.ini]
 +
|-
 +
| Jedi Knight II: Jedi Outcast
 +
| [http://repo.openpandora.org/?page=detail&app=jedioutcast_ptitseb repo]
 +
| {{Maybe | Works With Issues}}
 +
| {{No}}
 +
| Can map buttons easily in-game, but have not found a way to map mouse look to the Right Analog Stick. Using QJoyPad to mimic mouse movement crashes the game. Playable with the OUYA Controller if you use the trackpad instead to control mouse look.
 +
|-
 +
| Duck Marines
 +
| [http://repo.openpandora.org/?page=detail&app=duckmarines_ptitseb repo]
 +
| {{Maybe | Automap Is Not Playable}}
 +
| {{No}}
 +
| Game detects external controllers and automaps, but the mapped controls are not usable for some controllers, and I have not yet found a way to correctly remap them.
 +
|-
 +
| PCSX ReARMed
 +
| [http://repo.openpandora.org/?page=detail&app=package.pcsx_rearmed.notaz repo]
 +
| {{Yes}}
 +
| n/a
 +
| Custom control maps work wonderfully.
 +
|}
  
 
[[Category:Tutorials]]
 
[[Category:Tutorials]]
 +
[[Category:Bluetooth]]
 +
[[Category:Keyboard]]

Latest revision as of 21:51, 19 March 2015

Nintendo Wiimote

This includes instructions on installing software and configuration to pair Nintendo Wii Wiimotes using Bluetooth to the Pandora, and using them as joystick controllers. This was done under the base install of Angstrom Linux provided on the Pandora, using Hotfix 4. This does not include setting up a sensor bar type setup, but should allow you to use classic controllers that plug into the Wiimote.

Installing the Drivers

Open a Terminal, and run the command 

sudo opkg update

It will give you a warning about responsibility, and asks for your user password. This will update the Angstrom packages stored on NAND.

Then install the Wiimote drivers and software, cwiid, using the command 

sudo opkg install cwiid

Pairing the Wiimote

Make sure Bluetooth is enabled. In Hotfix 4, there's a script to "Toggle Bluetooth Status" in the Pandora menu under the "System" category. A light will turn on on the left hand side of the Pandora if Bluetooth is on, next to the network light.

Open a Terminal, and run the command and follow the directions. 

wminput

It will tell you to press 1+2 on the Wiimote to connect. On my Wiimotes, the lights flash and the fourth light on the Wiimote lights solid once paired. If you then quit the wminput application (for instance, by hitting CTRL-C), your Wiimote will un-pair and turn off. I usually just hide the Terminal in the background by minimizing the window while I run game emulators.

You can pair multiple Wiimotes, just run wminput a second time and follow the instructions to pair it. I only have two, and both lit the fourth light.

In PicoDrive, the Sega Genesis emulator, in the controller settings, if you push left or right it will display different joysticks configured. You can set up the buttons for different players there. The Wiimotes appeared as joysticks 1 and 2, in the order in which I paired them.

Changing the Wiimote Configuration

You can edit /etc/cwiid/wminput/default and /etc/cwiid/wminput/buttons to map the buttons of the Wiimote. You should quit wminput and restart them for these changes to take effect. They are plain text files. I edited them using vim from the command line, which is not the most user friendly thing to describe. Because they're system files, I needed to use sudo again, so I ran 

sudo vim /etc/cwiid/wminput/default

By default, the Wiimote is set up to control the mouse with the accelerometer. This means, as you tilt the Wiimote left and right, your mouse will shift around. I found it a bit distracting, and so I commented out two lines in /etc/cwiid/wminput/default so they look like this: 

#Plugin.acc.X   = REL_X
#Plugin.acc.Y   = REL_Y

Also, I use the Wiimote "sideways", like a traditional Nintendo controller. I changed the direction pad to reflect this. Though you can do that within emulator configurations, it seemed handier to just have that set up by default. To do this, make these changes in /etc/cwiid/wminput/buttons 

Wiimote.Up      = KEY_LEFT
Wiimote.Down    = KEY_RIGHT
Wiimote.Left    = KEY_DOWN
Wiimote.Right   = KEY_UP

It is also possible to map the Wiimote or extension buttons to a virtual gamepad. See below for instructions.

Nintendo Wii Classic Controller

There are two ways to use a Wiimote or Classic Controller with the Pandora:

  • As a virtual gamepad. This means you can use it in games that support gamepads, and allows multiplayer in games that support it, but won't work in games that don't support gamepads.
  • As a clone of the Pandora's gaming controls, by mapping it to the same keys. This theoretically means it would work in games that don't have gamepad support, or allow you to change the controls at all, as long as they are using the Pandora controls. However, currently, not all games will register the input with this method. SuperTux, OpenTyrian, PandoraPanic and Snes9X4D4P will. Giana's Return, Sqrxz and psx4pandora won't. Additionally, Mupen64Plus with the default PPSP Input Plugin won't - but the Blight Input Plugin will.

As a virtual gamepad

The default profile doesn't have classic controller buttons defined, but cwiid comes with a gamepad profile which does. You can load it in wminput like this using a terminal: 

wminput -c gamepad

Then connect your Wiimote and Classic Controller. You do not have to connect the Classic Controller before you connect the Wiimote.

However the analog sticks/dpad seemed to be set up wrong in the gamepad profile (/etc/cwiid/wminput/gamepad): 

Classic.Dpad.X = ABS_X
Classic.Dpad.Y = ABS_Y
Classic.LStick.X = ABS_HAT0X
Classic.LStick.Y = ABS_HAT0Y
Classic.RStick.X = ABS_HAT1X
Classic.RStick.Y = ABS_HAT1Y

should be replaced with: 

Classic.Dpad.X = ABS_HAT0X
Classic.Dpad.Y = ABS_HAT0Y
Classic.LStick.X = ABS_X
Classic.LStick.Y = ABS_Y
Classic.RStick.X = ABS_RX
Classic.RStick.Y = ABS_RY

Otherwise, you won't get proper analog input from the sticks, since PoV hats aren't analog.

As a clone of the Pandora's gaming controls

This method works well where it does, you get a clone of the Pandora's gaming controls (minus the nubs), that should theoretically work in all games that support the Pandora's gaming controls. However, because of differences in how the games receive input, not all will detect the "fake" input.

Here is the profile for the Pandora gaming controls: 

# D-Pad
Classic.Up	= KEY_UP
Classic.Down	= KEY_DOWN
Classic.Left	= KEY_LEFT
Classic.Right	= KEY_RIGHT

# Select, Start and Space
Classic.Minus	= KEY_LEFTCTRL
Classic.Plus	= KEY_LEFTALT
Classic.Home	= KEY_SPACE

# BXYA on Pandora
Classic.A		= KEY_END
Classic.B		= KEY_PAGEDOWN
Classic.X		= KEY_PAGEUP
Classic.Y		= KEY_HOME
Classic.ZL		= KEY_Q
Classic.ZR		= KEY_P
Classic.L		= KEY_RIGHTSHIFT
Classic.R		= KEY_RIGHTCTRL

Save that in /etc/cwiid/wminput - you can name it whatever you want, as long as you load it in wminput using "wminput -c filename" - and make sure to save it using UNIX line endings (LF).

Once the profile is loaded and your Wiimote/Classic Controller is connected, it will automatically work in some games, but not in others. This might be possible to change to work in all games by modifying the wminput source code.

Extra Information

MS Xbox360 controller

repo link forum link


Sony PS3 controller

link

OUYA Controller

The OUYA controller plays extremely well with the Pandora. As with the Wii controller above, many games that support joystick input will work automatically or by using in game mappers. For most other games, QJoyPad allows the OUYA controller to mimic the Pandora controls. The controller has enough excess buttons to map keys that are helpful in navigation, such as Enter, Escape, Start, Select, and Right Click.

The touch pad on the OUYA controller can control mouse movement and perform Left Click/Drag.

How to Connect

1. Turn on Bluetooth Hardware.

2. Hold down the OUYA button on the gamepad(s) until two lights are flashing.

3. Enter the following into a terminal: 

hcitool scan

Output should look like: 

AD:DR:ES:SO:UY:A1           Broadcom Keyboard
AD:DR:ES:SO:UY:A2           Broadcom Keyboard1

4. Then, for each of the controllers you would like to pair, use the hidd command with the address output from your terminal. For example, the first controller listed above: 

sudo hidd --connect AD:DR:ES:SO:UY:A1

If all goes well, there should be no output, and the first light on the controller should be lit.

Mayflash GameCube to USB Adaptor

These adapters must be plugged in through a USB 2.0 hub, but are plug n' play after that. As with other controllers, QJoyPad is necessary for some programs in order to mimic the Pandora Controls.

Program Specific Compatibility

After a controller is paired and found to be working with the Pandora, the following compatibility list can be used as a guide:

Program Link Button Mapping QJoyPad Compatible Additional comments
DraStic repo No No No method found yet for using external controllers
PanMAME repo Yes n/a
SNES9x EX+ repo Yes n/a Custom key maps work great. Bluetooth controller input does not currently prevent the Pandora from going to low poer mode, and the emulator will begin to freeze after the Pandora thinks that it is idle and turns on power saving. Suggest turning off idling power save while you play with a controller.
Not Tetris repo No Yes QJoyPad works fine. Map Escape and Enter to help with pausing and selections.
Flying Snake repo No Yes QJoyPad works fine. Map Start in order to help you begin a new round.
Mini Slug Project repo Works with issues No Game auto maps the OUYA controller fine, but maps the directional to the left stick. Have not found a way to use the D-Pad. QJoyPad is ignored.
Mupen64plus v2.1 repo Yes n/a If your controller is not already supported, it can be mapped by editing InputAutoConfig.ini - OUYA controllers and Mayflash GameCube-to-USB can be mapped and auto-detected using the following InputAutoCfg.ini
Jedi Knight II: Jedi Outcast repo Works With Issues No Can map buttons easily in-game, but have not found a way to map mouse look to the Right Analog Stick. Using QJoyPad to mimic mouse movement crashes the game. Playable with the OUYA Controller if you use the trackpad instead to control mouse look.
Duck Marines repo Automap Is Not Playable No Game detects external controllers and automaps, but the mapped controls are not usable for some controllers, and I have not yet found a way to correctly remap them.
PCSX ReARMed repo Yes n/a Custom control maps work wonderfully.
Retrieved from "https://pandorawiki.org/index.php?title=Controllers&oldid=30042"