Gentoo

From Pandora Wiki
Revision as of 05:15, 17 May 2014 by Kingu (talk | contribs) (Added photo to page)
Jump to: navigation, search
Gentoo running on Alec' pandora


forum thread

  • Razor-qt 0.5.2 desktop
  • Over 500 pre-built packages, including: Firefox 29.0, GIMP 2.8.10, QtCreator 2.8.1, gdb 7.6.2, Valgrind 3.9.0, gcc 4.7.3
  • All the packages were built for Cortex-A8 (softfp), mostly Gentoo arm stable

Installation requirements

  • Pandora All versions fine?
  • SD card Minimum 2GB

Download the gentoo image

  1. wget http://gentoo.openpandora.org/images/gentoo-pandora-2014.05.tar.bz2


Partition the SD card

  1. mkfs.ext2 -L boot /dev/mmcblk0p1# mkfs.ext4 -L gentoo -E stride=2,stripe-width=1024 /dev/mmcblk0p2# mkdir -p /mnt/gentoo# mount /dev/mmcblk0p2 /mnt/gentoo# mkdir /mnt/gentoo/boot# mount /dev/mmcblk0p1 /mnt/gentoo/boot


Extract Gentoo onto the SD card partitions

  1. tar xapvf gentoo-pandora-2014.05.tar.bz2 -C /mnt/gentoo# umount /mnt/gentoo/boot# umount /mnt/gentoo=== Wireless ===
  2. Click the wifi icon in the tray.
  1. In the window, press scan.
  1. "Double-click" your network (hit right nub up, might take a few tries if it's not tuned)
  1. Fill in the auth info and hit enter
  1. You should be connected now. It now will connect every time Gentoo starts.


Installing packages

available packages

  • Open a terminal and run:# $ su -


  1. Password:
  1. emerge -avK htop
  • You can also try updating the system using binary packages:
  1. emerge -auvDK @world
  • If you'd like to install packages that are not prebuilt, you need to first get the portage tree, and then build it yourself:
  1. emerge --sync (will take a while the first time)
  2. emerge -av wgetpaste