This is a page about the qemu port by IngoReis and mcobit (forum thread here).

Documentation

PND download and installation

Downloading the PND

Use your favorite browser to navigate to the following url: [repo...](Will be available after release) and click the Download button. Save the File somewhere on your PC. If you use your Pandora to download, you can save it to the directory mentioned in the next chapter directly.

Installing the PND

Put the downloaded file onto your sdcard into one of the following folders: For Desktop: YOURSDCARD/pandora/desktop For Menu: YOURSDCARD/pandora/menu For both: YOURSDCARD/pandora/apps

If you do this on your PC, insert the sdcard into your Pandora afterwards.

If you use pndstore or some other tool to download and install pnds, please see their documentation for how to use them.

Running the PND

If the above steps worked properly, you should see the Qemu for Pandora icon in the above mentioned place(s) now. (Double)click it to startup the GUI.

Using the UI

Main

Assigning RAM to the machine

Click on the textfield next to "RAM in MB" and enter the amount of RAM in MegaBytes, that the machine should use. If you leave this field blank, the standard value of 128MB will be used.

Launch the machine

When you are happy with all options, you can click the "Launch" button to start the virtual machine.

Exit the UI

If you want to quit the gui, click on the "Cancel" button in the Main tab.

Files and directories

Please note that the paths must not contain spaces or qemu will not start. That is a problem, we don't have a solution for right now. Sorry.

Mounting HDD images

Click on the icon with the folder next to "HDD image..." to browse your filesystem. Navigate to the imagefile you want to load and select it by doubleclicking it or mark it with a single click and press "open". The help-button will provide some hints on how to do that as well. It is also possible to enter the fullpath including the imagename into the box directly. (e.g. /media/PATHTOYOURSD/qemuimages/freedos.qcow2)

Mounting CD/DVD images

Click on the icon with the folder next to "CDROM iso.." to browse your filesystem. Navigate to the iso (cdrom image) you want to load and select it by doubleclicking it or mark it with a single click and press "open". The help-button will provide some hints on how to do that as well. It is also possible to enter the fullpath including the isoname into the box directly. (e.g. /media/PATHTOYOURSD/qemuimages/freedos.iso)

Mounting Floppy images

Click on the icon with the folder next to "Floppy image" to browse your filesystem. Navigate to the image (floppy image) you want to load and select it by doubleclicking it or mark it with a single click and press "open". The help-button will provide some hints on how to do that as well. It is also possible to enter the fullpath including the isoname into the box directly. (e.g. /media/PATHTOYOURSD/qemuimages/freedos.img)

Mounting a shared folder from your filesystem

Click on the icon with the folder next to "Shared folder" to browse your filesystem. Navigate to the folder you want to load and select it by doubleclicking it or mark it with a single click and press "open". The help-button will provide some hints on how to do that as well. It is also possible to enter the fullpath including the isoname into the box directly. (e.g. /media/PATHTOYOURSD/shared) This folder will be mounted as a fat16 folder, what means, that it cannot be bigger as 512MB!

Image Tools

Creating HDD images using the UI

On the "Image Tools" tab, type in the name of your image in the first textfield without a fileextension. (e.g. test-image)
Type the desired size of the new image into the second textfield. The size is in MegaBytes. So for a 1GB image type 1024.
Click on the "Create Image" button.

Your new image will be created in the following directory: appdata/qemu/images/

Other options

Video options

Use Bochs vga card instead of Cirrus Logic

Simulate a standard VGA card with Bochs VBE extensions instead of the default Cirrus Logic GD5446 PCI VGA

Fullscreen

Start the virtual machine in fullscreenmode rather than in a window. You can switch between the modes by pressing alt+ctrl+f.

Sound options

Disable sound

Disable sound by selection this option. (Qemu doesn't support to disable the sound completely, but with this option you will choose a soundcard, that is not supported by most operating systems)

Adlib card emulation

Emulate an additional Adlib synthesizer card.

CPU options

486 CPU instead of pentium

Check this option, if you want qemu to emulate a 486 PC instead of the default pentium PC.

Network options

Disable Network

Check this, if you do not want qemu to emulate a networkcard.

Recommend Drivers

Cirrus Logic GD5446 Win95(win95 only) Driver(This Driver is the best i found in Web)

http://www.treiberupdate.de/treiber-download/z-dltreiber/download_treiber_2099999.php?load=152416&dlidday=4rtfd44sdwer5de&extern=0&vendor=Cirrus_Logic&sys=Windows95

a better win9x Driver for Soundblaster

http://www.claunia.com/qemu/drivers/w9x_sb16.zip

Univbe Driver Version 5.3a for Dos

ftp://cyberia.dnsalias.com/pub/filebase/freedos/sdd53a-d.zip

Univbe Driver Version 6.7 for Dos

ftp://cyberia.dnsalias.com/pub/filebase/freedos/univbe67.exe

Univbe is for Private Using free,here are the Reg Codes i have gotten from Wikipedia

http://forum.gp2x.de/download/file.php?id=1387

here is the PCI BUS Driver for Win9x

http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/4241/a08/infinst_enu.exe&agr=&ProductID=816&DwnldId=4241&strOSs=&OSFullName=&lang=eng

here is a not tested 1 File automatic installation Driver for MSDOS generic CDROM Drives.

http://www.wollomatic.de/download/ptsdos/fxide158.exe

Installing an OS into an image

Creating HDD images using your Desktop PC (Linux)

Creating HDD images using your Desktop PC (Windows)

Download Qemu Manager 7 for Windows.

Install into Windows and run Qemu Manager as Admin.

go to the Option Qemu Version Management and install Qemu 0.14.1

(You must do this,otherwise QemuManager will use Version0.11 by itself and this Version isnt Compatible)

Now you can Use the "File/Create new Virtual Disk" Option

Choose the max Image Size and i recommend the qcow2 Image Format.

Your new empty Image is now in your QemuManager Folder named "Images". It will be selectable when you create a new VM.

Installing Microsoft DOS

On your Desktop PC

On the Pandora

Installing Microsoft Windows 3.1 / 3.11

On your Desktop PC

On the Pandora

Installing Microsoft Windows NT

On your Desktop PC

The -cpu pentium option is mandatory.
For networking, use: -net nic,model=pcnet -net user
At login: contrl+alt+2 to get the command window, then:

sendkey ctrl-alt-delete

On the Pandora

Installing Microsoft Windows 95 on PC

Start Qemu Manager
In menu, select VM -> New Virtual Machine
Name it what you like (eg "win95")
Ensure next two options are "Default VM Store" and "Standard x86/x64 PC"
Set Operating System to Windows 95
Important: Change Qemu version to 0.14.1
Click Next
Set RAM to 128MB (this is the max Qemu can use on Pandora)
If you have already created a HDD image using the previous instructions on this page, select option to use an existing image and locate that file. Or,
If you have not created a HDD image yet, select option to Create New. Set desired size and ensure Disk Image Type is Qcow2.
Click Next
Important: Ensure you change Virtual Machine Output to "QEMU Window".

You should now see your new VM in the main Qemu Manager window. Before you install the OS you need to do some basic setup. The Hardware tab should be selected by default. If not, click it. From here you change options by double clicking each item.

Set Sound Card to "Soundblaster 16"
Set Enable Networking to "No"
Set Video Card to "Cirrus Logic GD5446"

Now for some performance tweaks.

Click the "Advanced" tab.
Set Disable HPET to "Yes"
Set Disable ACPI Support to "Yes"

And finally, select the Win95 discs.

Click the "Drives" tab.
Set Floppy 0 to your (floppy) boot disk or disk image.
Set CD ROM to your CD or ISO.

You should now be ready to start your install. Click the green "Play" button to launch the VM, and Windows Setup should start. At the end of the install process, Windows Setup will tell you to remove any disks. Go back to the Qemu Manager window "Drives" tab and clear both of your selections. Now allow Windows Setup to reboot the machine.

The following notes were added to this section but do not seem to apply to all installs. They could use some clarification and possibly less shouting.

(THE MSDOS CDROM DRIVER HANGS A LITTLE BUT AFTER 1-2MINUTES WILL IT LOAD FINE)
Setup Should start well(when it hangs in installation Progress,theres a alternativly way to install Win95/98)
AFTER INTALLATION CHANGE IN HARDWAREMANAGER THE PLUG&PLAY BIOS MANUALY TO PCI-BUS. (HARDWARE AUTODETECTION WILL NOT WORK FULL THEN YOU MUST MAKE THIS AFTER INSTALLATION)

Happy installing/experimenting :)

Installing Microsoft Windows 98

On your Desktop PC

start Qemu Manager

create new VM

Name it what you like(example win98)

Choose x86PC , Operating system Windows98 and very very Important

choose Qemu Version 0.14.1 the standart 0.11.1 will not work

select Ram 128MB(the max what Pandora Qemu can use)

and choose the size of your Harddisk

Virtual Machine Output is important to set it to "QemuWindow"(not QemuManager)

now you should use this Hardware Settings:

Soundcard=Yes

SoundHW=Soundblaster16

Networking=none (the Networking is not testet now with Win98,but it could work)

VideoCard=Cirrus GD5446

USBSupport=Yes

USBDevices=add USB Tablet with the + Symbol(this is for Pandora Touchscreen support)

and under the Menu Advanced some Performance Tweaks:

Disable Hpet=YES

Disable ACPI Support=YES

NOW WE CAN INSTALL WIN98 or WIN98SE:

Switch to Drives and Choose as CDROM your CDROM Drive or your own Win98Iso

start Qemu with the green Play Button

start from CDROM and start install

(THE MSDOS CDROM DRIVER HANGS A LITTLE BUT AFTER 1-2MINUTES WILL IT LOAD FINE)

THE TOUCHSCREEN SUPPORT WILL ONLY WORK WHEN YOU AFTER INTALLATION CHANGE IN HARDWAREMANAGER THE PLUG&PLAY BIOS MANUALY TO PCI-BUS.

(HARDWARE AUTODETECTION WILL NOT WORK FULL THEN YOU MUST MAKE THIS AFTER INSTALLATION)

Happy installing/experimenting :)

alternativly Way to install Win95/98

On the PC

Break the installation Progress with F3 and you will be in MSDOS

switch to a: and make your HD Image bootable with

sys c:

switch to HDD and make a setup Directory with

md c:\setup

cd c:\setup

now switch to your CD Drive

d:

cd win95 (or when you want to install win98,then "cd win98")

and copy your Setup Files to your HDDImage

copy . c:.

your setup Files should now copy to c:\setup

after this boot your HDD Image without Floppy Image and without your Windows Iso. With 98 you can also boot from the cd, just starting the computer, not the installation.

you must be now in Dos and for 95, you must type

cd setup

xmsmmgr

setup

For 98:

cd setup

xmsmmgr (may be already running)

install

Now this is the Way who must install Windows perfectly

happy experimenting/installing

On the Pandora

same like PC

Installing Microsoft Windows XP

On your Desktop PC

same like Windows98 but not testet yet.

On the Pandora

Installing Linux

On your Desktop PC

On the Pandora

Downloading and using ready-made FreeDOS and ReactOS images

Troubleshooting

Known problems

We are working on them. If you have found a solution or can provide a patch, please pm mcobit at boards.openpandora.org

Paths to image or isofiles as well, as imagenames specified in the "Image Tool" MUST NOT contain any whitespaces.
EMS Memory under Dos is a little Tricky to get work but it work. You must use in Config.sys the Entry "EMM386 M9" and behind Himem.sys must stand nothing,only Himem.sys
Shared Folders: don't use shared folders as an "active" source: write support for shared folders is buggy, so don't run applications/games from shared folder, just copy its content on the virtual systems drive. A lot of games have problems writing to the shared folder

under Windows,when a Game set 320x240 the Screen will stretched,but work,then try another Resolutions.

Report a bug

What to do, if…

Windows cannot find the mounted CD Image??

Solution=Install a MS-Dos CD-Rom Driver in your Image and let it load before Windows starting.

EMS Memory isnt working??

Solution=It works when you have in Config.sys:

Device=Himem.sys

Device=Emm386.exe M9

(or Devicehigh=)

A Game/or System breaks and you are in PanQemu Startwindow again??

Its a Fullscreen Bug from Qemu

(Qemu for Pandora cannot handle Resolutions over 640x480 in Fullscreen Mode)

Solution=use Qemu in Windowed Mode(not in Fullscreen)and switch to 640x480,

then you can press ctrl+alt+f to switch to Fullscreen again(works well).

Tipps, Tricks & Hints

General

If you happen to miss the [alt] and [ctrl] keys, look between the nubs
Sometimes it can be necessary to change a virtual disc or floppy, to achieve this
- Press [ctrl] + [alt] + [2] to get to the command and monitoring console (of Qemu)
- Locate the virtual drive you want to change the image for by typing "info block", usually the CD-Drive is named ide1-cd0 and Floppy-Drive is named floppy0
- Eject the currently loaded image by entering "eject ide1-cd0" or "eject floppy0"
- Load the new image into the virtual drive with "change ide1-cd0 /path/to/your/image/file" or "change floppy0 /path/to/your/image/file"
- Press [ctrl] + [alt] + [1] to return to the standard output window

MS-DOS 6 and above / alike

Keyboard
- if you can't enter ":" try pressing [shift] (or [left shoulder button]) + [Fn] + [;] or
- if you can't enter ":" and/or "\" one solution is to use the italien keyboard layout. just type "keyb it" on the commandline and press [enter] after that you can enter ":" with [Shift] + [.] and "\" with [Fn] + [H]
CD-ROM Support
- To use cd images as CD-ROMS under MS-DOS 6 and above you need to do the following
- Get the Ms CD extension (mscdex.exe) from here
- You need a CD-ROM driver, there are several available, one that is known to work is "oakcdrom.sys"
- Copy the both on your virtual disk, the following bulletpoints assumes that you put them both into "c:\dos", if not change the pathnames according to your choice
- Put the following line in your config.sys : "DEVICEHIGH= C:\DOS\OAKCDROM.SYS /D:MSCD001"
- Put the following line in your autoexec.bat: "LH C:\DOS\MSCDEX.EXE /D:MSCD001 /L:E"
- Some explanation to the above: the character string "MSCD001" is just id you can choose as you like, but it has to be identical in both files. The Parameter "L:E" associates the CD-ROM with the drive letter "E", this is optional.
Mouse support
- Mouse needs a driver under MS-DOS environments.
- There are several around, a - memory wise - light alternative could be CuteMouse
- There are several executable files in the archive you download (inside the bin folder). You need a file that begins with "ctm-", choose the file according to the language you prefer (e.g. "ctm-en.exe" who wan't it in english)
- If you choose the english version and put it directly into the root of your main virtual drive, simply put the line "LH C:\ctm-en.exe" in your autoexec.bat to load it on startup.
Two pane file manager
- As using the commandline to move data from one point to another can be very cumbersome (at least if no xcopy is available) have a look at DOS Navigator an open source Norton Commander clone

Creating an ISO image with the pandora

You can use your Pandora to create an iso image of your original source if you can attach an external CD/DVD ROM drive via USB. Open a terminal and type "sudo dd if=/dev/scd0 of=/media/PATH_TO_YOUR_SD/cdimage.iso".

Credits

Compatibility lists

Operating Systems

Name	Version	Runs?	Useable?	Loadingtime	Comments
Freedos	1.1	Yes	Yes	??	Need a bit of work to get it installed
GParted	0.12.0-2	Yes	No	??	Very long to run. Graphical mode crash.
Haiku	r1 alpha 3	No	No	??	Converted official vmware image.
Kolibri OS	0.7.7.0	Yes	Yes	15 seconds	Official iso from Kolibri website, set graphics to 640x480 or it won't run.
Microsoft DOS	6.22	Yes	Yes	??
Microsoft DOS	7.10	Yes	Yes	??
Microsoft Windows	3.1	??	??	??
Microsoft Windows	3.11	Yes	Yes	??
Microsoft Windows	95	Yes	Yes	??
Microsoft Windows	98	Yes	Yes	??	IO - Access seems slow
Microsoft Windows	ME	??	??	??
Microsoft Windows	2000	Yes	??	??	Should only install with activated Win2k hack for qemu. Runs very slow but usable. Tweaking guide here.
Microsoft Windows	XP	Yes	Not quite	??
Microsoft Windows	VISTA	??	??	??
Microsoft Windows	7	??	??	??
OS/2 (IBM)	Warp 4	Yes	??	??	Bootdisk creation is tricky. Tested until working Workplace Shell.
ReactOS	??	Yes	Yes	??	Downloadable image from website
TinyCore Linux	??	Yes	Yes	??
Ubuntu Linux	??	??	??	??

Office/Desktop programs

Name	Version	Runs?	Useable?	Comments
Notepad	Windows 95	Yes	Yes
CasCADe	Windows 95	Yes	Yes
Geoworks Ensemble 2.0	DOS (6.22)	Yes	Yes	Needs custom 1.44mb disk images. Is not very fast in screen build-up (might need a different setting).

Games

Office/Desktop programs:

Name	Version	Operating System	Runs	Sound	MHz	Playable	Comments
Age of Empires		Microsoft Windows 95	Yes	yes	950	Yes
Archemdian Dynasty (Schleichfahrt)		Microsoft DOS 6.22	No	No	950	No
Arctic Baron (Transarctica)		Microsoft DOS 6.22	No	No	950	No
Ascendancy		Microsoft DOS 6.22	Yes	No	950	Yes
Alien Breed		Microsoft DOS 6.22	Yes	No	950	?	heavy flickering, setup crashes on sound config
Alien Breed - Tower Assault		Microsoft DOS 6.22	Yes	Yes	950	?	heavy flickering
Alone in the Dark		Microsoft DOS 6.22	yes	No	950	yes	slow but playable
AL-Qadim The Genie's Curse		Microsoft DOS 6.22	yes	No	950	Yes	stutters a little
B.A.T		Microsoft DOS 6.22	Yes	No	950	Yes	too fast @950MHz
Battle Arena Toshinden		Microsoft DOS 7.10	Yes	Yes	870	Yes
Bundesliga Manager Prof.		Microsoft DOS 6.22	Yes	No (Just Music)	600	Yes	It has some graphic bugs and mouse fails sometimes
Cadaver		Microsoft DOS 6.22	Yes	No	950	Yes
Command&Conquer		Microsoft DOS 7.10	Yes	yes	950	Yes	perfectly
Commander Keen 2		Microsoft DOS 6.22	Yes	No	600	Yes
Commander Keen 3		Microsoft DOS 6.22	Yes	No	600	Yes
Commander Keen 4	1.4	Microsoft DOS 6.22	Yes	Yes	700	Yes	Works with ad-lib on. Has some flickering when scrolling.
Commander Keen 5	1.4	Microsoft DOS 6.22	Yes	Yes	800	Yes	Works with ad-lib on. Has some flickering when scrolling, but less than Keen 4.
Commander Keen 6	1.0	Microsoft DOS 6.22	Yes	Yes	800	Yes	Works with ad-lib on. Has flickering. Is not 100% smooth on 800MHz
Crusader: No Remorse	Gog.com	Microsoft DOS 6.22	Yes	Yes	950	Yes
Dune		Microsoft DOS 6.22	Yes	Yes	950	No
Dune 2		FreeDos	Yes	No	900	Yes
DungeonKeeper		Microsoft DOS 7.10	Yes	Yes	870	Yes
Descent	1	Microsoft DOS 7.10	Yes	Yes	870	Yes
Elvira 2 - The Jaws of Cerberus		Microsoft DOS 6.22	No	No	950	No	Crashes on "Load last save ?" message after startup
Epic Pinball		Microsoft DOS 6.22	Yes	No	500	No	Even on 500mhz it's too fast to be playable. Has flickering on texts.
Fatal Racing		Microsoft DOS 6.22	yes	No	950	No	too slow to play
Gods		Microsoft DOS 6.22	No	No	950	No
Grand Theft Auto		Microsoft DOS 6.22	Yes	Yes	800	No	A bit slow, but playable (8 bit colormode). Sound works on soundblaster mode. 24 bit color mode doesn't work.
Hanse, die Expedition		Microsoft DOS 6.22	Yes	Yes	600	Yes
Halloween Harry	Shareware	Microsoft DOS 6.22	Yes	Yes	950	Yes	smooth, controls adjustable so dpad+action buttons possible
Ishar III		Microsoft DOS 7.10	Yes	No	870	Yes
James Pond 2		Microsoft DOS 6.22	yes	No	950	yes	runs perfectly without Sound
Jazz Jackrabbit	CD	Microsoft DOS 6.22	Yes	Yo	800	No	Sprites are trailing/flickering, makes it unplayable. Sound works perfectly.
Keen Dreams		Microsoft DOS 6.22	Yes	Yes	800	No	Set sound in menu, music does not work. As soon as you start a level the screen will flash game/white/game/white.
Micro Machines 2		Microsoft DOS 6.22	Yes	No	800	No	Way too slow to be playable.
Microprose F1GP Demo!		Microsoft DOS 6.22	Yes	No	950	Yes	Demo is restricted to 8 FPS
Need for Speed		Microsoft Dos 7.10	Yes	No	950	Yes	runs perfectly without Sound
One Must Fall 2097	CD	Microsoft DOS 6.22	Yes	Yes	950	Yes	runs near perfect, with best sound quality
Popolus 2		Microsoft DOS 6.22	Yes	No	950	Yes	too fast @950MHz
Prince of Persia		Microsoft DOS 6.22	Yes	Yes	800	Yes	Sound and (ad-lib) music work perfectly. Use D-pad for controls, A for jump, Shift or L-button for slow walk. Exit with CTRL+Q
Rad van fortuin		Microsoft DOS 6.22	No	No	800	No	Does not start at all
The incredible Machine 2	DOS	Microsoft DOS 6.22	No	No	950	no	blank screen after start
Theme Park		Microsoft DOS 6.22	Yes	Yes	950	Yes	no music
Thuis in het mileu		Microsoft DOS 6.22	Yes	No*	500	Yes	Set back to 500mhz, otherwise it's not playable. Use nubs for mouse, touchscreen is totally off. *Not sure if the game has any sounds at all.
Tie Fighter		Microsoft DOS 6.22	No	No	950	No	Does not start
Tomb Raider		Microsoft DOS 7.10	Yes	yes	950	Yes	very little Bit of stuttering
Skunny Karts		Microsoft DOS 6.22	Yes	yes	800	Yes	Works perfectly, but buttons need reconfiguring (shift=gas, alt=left, ctrl=right). Plays best on 50% game speed, hires VGA7 mode (change in main menu > setup)
Stunts		Dos 6.22	Yes	yes	800	Yes	perfectly
Supaplex	6.3	Microsoft DOS 6.22	Yes	Yes	800	Yes	Not playable, config screen crashes, can't move in game.
Syndicate		Microsoft DOS 7.10	Yes	yes	950	Yes	smoothly
Skyroads		Freedos1.1	Yes	yes	950	Yes	smoothly
Silent Hunter		Microsoft DOS 7.10	Yes	yes	950	Yes	super playable with Mouse
Settlers 2 Gold (Die Siedler 2 Gold)		Microsoft DOS 6.22	Yes	No	950	Yes	save/load leads to crashes sometimes
Ultima Underworld : The Stygian Abyss		Microsoft DOS 6.22	Yes	No	950	No	too slow to be playable
WIPEEEOUT		Microsoft DOS 7.10	Yes	No	870	Yes
Winpolis		Microsoft Windows 3.11	Yes	Yes	600	Yes
World of Xeen		Microsoft DOS 6.22	Yes	Yes	950	Yes
World of Xeen		Microsoft DOS 6.22	Yes	Yes	950	Yes
Xentar(Knights of)		Microsoft DOS 6.22	Yes	Yes	950	Yes	perfectly in 2D Mode
X-Wing		Microsoft DOS 6.22	Yes	No	950	Yes	Runs well with low details