Compile on the Pandora

Lazy but working way

This is how I, T4b, set up my develepment environment. Of course it is on an SD card, the NAND is way to small. I recommend an 8GB card.

Installing the OS to an SD

This part was almost only copied from there: http://www.pandorabits.org/index.php?page=sd-installer

1. Copy the PND to an SD card in the usual manner. You can get it from PandoraBits' download page.
2. Copy a firmware image to the same card. You can get one from here, the file "pandora-rootfs.tar.bz2" should always be the latest image, older ones are under the "images" directory. I suggest using the newest one, I did it with the (at the moment of writing this) newest one, with HotFix5.
3. Ensure that you have both SD cards in Pandora. It doesn't matter which one is in which slot.
4. Run the PND. You will probably be asked for your password at this point. This is needed because the installer needs to run as root in order to partition and format the SD card.
5. Follow the prompts that appear. You will be asked for the firmware image file, then asked to select the card that you want to use, then asked to choose how much space to allocate to the VFAT (Windows, see below) and swap partitions.
6. Once you have gone through all the prompts, the firmware image will be installed to the SD card. This will take upwards of ten minutes. The larger the card, the longer it takes, so be patient.
7. Once complete, you will be able to boot your Pandora from the SD card by powering it on with the card in the left slot. Please note that the first boot will take longer than usual, at least ten minutes. Cards of 16 GB or more seem to take a lot longer.

Getting the actual development environment

No you'll find out why I called it a "lazy" way.

1. Download the newest archive from this thread in the German gp2x.de forum. Use google translator if necessary (at the time of writing this the newest one was this [direct download])
2. Copy it on an SD which you insert into your Pandora

3. cd /
   

4. sudo tar -xjf path/to/archive.tar.bz2
   

5. Reboot

Done!

The opkg way

torpor described how to build apps directly on the Pandora.

You can try the following:

1. I found that the www.angstrom-distribution.org repo was very slow, so changed the config files in /etc/opkg/ to use us.feeds.angstrom-distribution.org instead.

2. Enable sshd, and ssh in from another machine. This helps keep control when things break. To get root:

sudo bash

3. Set up a root overlay on your SD card. This gives you a way to try again when things break, and there are other benefits. I added /home/ to the overlay also, by editing the "premount" script. To explain the extend terminology a bit, a "root overlay" is a loop mounted filesystem (on an SD) which goes over the top of (most of) your normal root filesystem. You can still read the files underneath it, but any writes / deletes are recorded only in the overlay filesystem. Your real root on the NAND is not modified at all. The "premount" shell script is used to mount your overlay, have a look in it to see how it works. You can sort of unmount them using umount -l (lazy umount), but I'm not sure if this is safe. The reliable way to unmount it is to reboot the Pandora!

4. Mount the overlay. Check this worked, with "mount" or "df".

5. Get new fresh package lists:

opkg update

6. ncurses packaging seems to be broken, and ncurses is important! So, I suggest to do this first (in the overlay), or be prepared for things to start breaking when it gets removed later. If it does get removed, make sure to install it again!

opkg install libncurses5

7. Install dev packages:

opkg install gcc gcc-symlinks make-dev binutils-dev cpp cpp-symlinks g++ g++-symlinks libstdc++-dev libgcc-s-dev

8. Try to compile "hello world".

9. I had trouble with libsdl-image-1.2-dev and libpng / libpng-dev. libpng-dev from the repo conflicts with 'libpng' on the Pandora. That latter package is misnamed I guess, it should be called 'libpng-dev', only contains libpng-config and libpng12-config (dev tools, not essential) but task-pandora-core depends on it. The real libs are in libpng12-0 / libpng3. So I did this:

opkg remove libpng --force-depends
opkg install libpng-dev

10. Install extra dev libs:

opkg install libgles-omap3-dev
opkg install libsdl-1.2-dev libsdl-gfx-dev libsdl-image-1.2-dev libsdl-mixer-1.2-dev libsdl-net-1.2-dev libsdl-ttf-2.0-dev

 Hopefully this will go smoothly if you've fixed the png conflict in step 9.

11. Install optional extra stuff, if you want them:

opkg install vim vim-syntax
opkg install libgles-omap3-demos
opkg install screen git rsync

The above was from memory, I didn't re-test all of it because it took too long even the first time! If you find other problems or quirks, please correct it.

After all this, I was able to build torpor's suggested dev demo app, WakeBreaker.

Using the C Development Tools PND

For compiling C/C++ programs that use SDL, GTK+, QT or Allegro, a PND is now available: repo. Running this PND gives your Pandora access to gcc and g++ without changing the root filesystem.