Software projects/OS/Slackware/Advanced usage/Kernel

Kernel: to recompile or not to recompile ?

• You don't have to if you don't need to add a new feature.
• You don't have to if there's no urgent security kernel update.
• If you want to acquire a lot of global Linux knowledge, or if you are just curious, then yes, just go for it.

Is it simple or complicated to recompile ?

• Both.
• But as there's a default kernel configuration file for Open Pandora, it's pretty easy.

Downloading and pre-configuring the latest kernel sources

Directly on the Pandora

• I wrote a script to automatize the OP kernel sources download and preparation.
• Plug the net, be root, then:

sh /root/kernel-sync.sh

• It's very long because of the 16MB/s SD slots throughput.

From a PC

If you prefer to speed up the process and download them from your computer, then proceed like this (assuming your SD card is mounted under /media/SLACK/):

mkdir -p /media/SLACK/usr/src/
cd /media/SLACK/usr/src/

git clone git://openpandora.org/pandora-kernel.git

ln -s pandora-kernel linux

cd pandora-kernel

git checkout --track -b pandora-3.2 origin/pandora-3.2

• Then boot the pandora, and do this as root:

cd /usr/src/linux
make omap3_pandora_defconfig

The fun part: tweaking

• The configuration is stored in a hidden file named /usr/src/linux/.config
• You can use many tools to edit the configuration.
• The kamikaze way: edit manually the .config . Don't do that.
• The lazy way: install KDE and use as a user:

gksu make xconfig

• The common way, which i recommend:

make menuconfig

Menuconfig

• Kernel options are stored in a tree.
• Options can be marked as [*] built-in, or <M> module.
• The vast majority of those options refers to a driver or a functionality.
• Built-in means inside the kernel, so once the kernel boots, you can't remove or change parameters.
• Module means you can either add or remove them after the boot. Ever typed "modprobe ehci-hcd" ?
• The example below is copied from my PC, will copy a real OP one later.

Arrow keys navigate the menu.  <Enter> selects submenus --->.  Highlighted letters are hotkeys.  Pressing <Y> includes, <N>
excludes, <M> modularizes features.  Press <Esc><Esc> to exit, <?> for Help, </> for Search.  Legend: [*] built-in  [ ]
excluded  <M> module  < > module capable 
[*] DMA memory allocation support
General setup  --->
[*] Enable loadable module support  --->
[*] Enable the block layer  --->
Processor type and features  --->
Power management and ACPI options  --->
Bus options (PCI etc.)  --->
Executable file formats / Emulations  --->
[*] Networking support  --->
Device Drivers  --->
Firmware Drivers  --->
File systems  --->
hacking  --->
options  --->
Cryptographic API  --->
Virtualization  --->
Library routines  --->
<Select>    < Exit >    < Help >

A simple tweak

• Highlight Cryptographic API --->
• Push [enter]. You're now in the Cryptographic API section.
• With [space], select all cryptographic algorithms you can. Ensure they are marked as <M>, not <*>.
• With [right], select < Exit >, then push [enter].
• Again, with [right], select < Exit >, then push [enter].
• Now push [enter], saying <Yes> to "Do you wish to save your new configuration ?".
• You're now ready to compile a kernel which will drive James Bond angrily jealous.

Kernel compilation

• Be sure you've overclocked your OP to the maximum MHz.
• At 800MHz, it's a 3+ hours job.
• Now you can compile it with another custom script:

sh /root/kernel.sh

• Reboot.

Speed up the compilation time using two or more Pandoras

• Read this, and set up your Pandoras.
• Make the adequate changes in /root/kernel-dist.sh with your editor of choice.
• Then compile with:

sh /root/kernel-dist.sh

• Reboot.

3D driver

• So you booted your OP with your brand new kernel, but you can't run 3D apps. Again, two custom scripts for lazy people.
• Download the sources:

sh /root/3d-get-sources.sh

• Compile and install them:

sh /root/3d-compile.sh

• Reboot.

Older Wiki page

• 13.37 page is located here.