View source for Software projects/OS/Slackware/Advanced usage/Network get started-13.37

= Network interfaces =
* eth0 is the interface that shows up when you plug an USB to ethernet adapter. A list of compatible ones is located [http://pandorawiki.org/USB_compatibility_list#USB_to_Ethernet_adapters here].
* wlan0 is the embedded Wi-fi interface.
* wlan1 is the name of a Wi-fi dongle.
* usb0 is the small USB port (not sure, may be the first plugged).
* usb1 is the big USB port (not sure).
Anyway, you can check the physical link connectivity, as root:
 ethtool usb0
 ethtool usb1
 ethtool eth0
* If you connect an OP with another using an USB cable, the OP at the little end of the cable will dramatically drain the current from the other OP's big USB port.
* To avoid this, at the little end, type as root:
 echo 0 > /sys/class/power_supply/twl4030_usb/enable 
* With this usb-usb connection, you have to:
 rmmod g-cdc
* There's also a bluetooth interface, but until now i just connected a mouse, so can't tell much about it.
* These interface numbers (eth0, eth1 etc.) may vary, depending which one you plug first.
* The numbers can be fixed using the /etc/udev/rules.d/70-persistent-net.rules file.
* This file is deleted at each shutdown. To make use of it, edit /etc/rc.d/rc.local_shutdown , and comment this line:
 rm /etc/udev/rules.d/70-persistent-net.rules
into
 #rm /etc/udev/rules.d/70-persistent-net.rules

= SL4P default setup =
* The Network Manager, well, manages the connections, and asks for an IP address through a DHCP request. This is how it acts when you boot SL4P for the first time.
* You can set it up through a right-click on the Xfce desktop icon.
* It's not included in the stock Slackware-13.37, so i compiled and shipped it.
* It's now part of the 14.0 and onwards.

= Slackware friendly setup =
* Wicd is included in the stock Slackware extra packages, and i shipped it in SL4P 13.37.
* I don't include it anymore inside 14.0 but you still can install it, using slackpkg or any other method.
* I tried it only a bit so i can't recommend it, or not.
* If you want to give it a try, be root, then install it, and disable the network manager. Edit /etc/rc.d/rc.local and comment at the end:
 /etc/rc.d/rc.networkmanager start
into
 #/etc/rc.d/rc.networkmanager start
* Activate Wicd at boot:
 chmod +x /etc/rc.d/rc.wicd
* Activate Wicd frontend under Xfce. Go in the menu -> Settings -> Session and Startup -> Application Autostart tab, then check "Wicd Network Manager Tray".
* Reboot.

= Slackware default setup =
* Stock Slackware doesn't use the Network Manager, nor Wicd. The network is established at boot, once for all.
* If you want a non-graphical server-oriented setup, you have to disable the network manager (and Wicd). Edit /etc/rc.d/rc.local and comment at the end:
 /etc/rc.d/rc.networkmanager start
into
 #/etc/rc.d/rc.networkmanager start
* Run as root:
 netconfig
* The hostname MUST BE:
 darkstar
otherwise you'll break some Pandora scripts compatibility. Sudo won't launch anything with the wrong hostname.
* Set you parameters.
* Edit /etc/rc.d/rc.inet1.conf to finalize your setup.
* Be sure to have all used interfaces plugged in when booting. With the deactivation of the network manager, it's no more plug and play.
* Reboot.

[[Category:Network]]
[[Category:Slackware]]
[[Category:System]]