Pandora Wiki - User contributions [en]

USB compatibility list

2014-10-03T22:45:53Z

A2000: /* USB to Ethernet adapters */

This is a list of USB devices that have been tested on the Pandora. If the device you want to know about isn't listed here, don't worry! Just go to [[USB_reference|the USB reference page]], look up the specs of your device, and you may be able to figure out if it's compatible.

= Troubleshooting =

Each type of device will have its own unique way to troubleshoot.

But here are some general tips:

* Is USB-Host enabled?
* check <tt>lsusb</tt>
* check <tt>dmesg</tt>

When asking for help on [http://boards.openpandora.org/index.php?/forum/8-support/ the forums support board], be sure to post both your <tt>lsusb</tt> and <tt>dmesg</tt>.

Because <tt>dmesg</tt> output is very long, you need to paste it within [spoiler] tags like this:

[spoiler]
(paste your dmesg in here)
[/spoiler]

An easy way to get your <tt>dmesg</tt> so you can easily copy and paste it, is:

dmesg|leafpad

<tt>leafpad</tt> will open with the output of <tt>dmesg</tt>.

If you have no networking on your palmtop, you can send the information to a text file like this:

cd (your storage card)
dmesg>textfile.txt
sync

Then you can remove your card (if no programs are using it or PNDs are running on it) and bring it to a card reader on your desktop.

= Networking =

Please see the [[Mobile Broadband]] page for tips on how to get these working, as well as [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/ this tutorial] from the GP32X forum.

== HSDPA (3G) Modems ==

Please note that many (if not all) USB 3G modems need modemmanager to be installed for switching from mass storage mode to serial communications mode. When first plugged in, most 3G USB modems claim to be a mass storage device and offer, on its built-in flash, drivers and connectivity software to be installed. Mostly this is only for Windows and Mac, so for the Pandora this is not useful. modemmanager instantly takes care of toggling the mode, so that when you plug in the modem, after a few seconds or maybe half a minute modemmanager has switched the modem to communications mode and NetworkManager is able to use it.

If you are using a Firmware before HF7 (or one of its Alpha/Beta versions) you have to install modemmanager. To do so, connect your Pandora to the Internet, open a terminal and, as a super user, intall it via opkg by entering the commands:

:sudo opkg update
:sudo opkg install modemmanager

'''Note:''' If you are using a firmware more recent than "Zaxxon" Hotfix 6 (starting with HF7) you do not have to follow the steps outlined above since modemmanager comes preinstalled.

'''Note 2:''' After plugging in the USB 3G modem, it may take some time until NetworkManager is able to use the modem. Wait for at least half a minute, until you give up and report that the modem doesn't work.

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| ZTE K3565-Z / MF626 / MF627 / MF636
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__956513] [http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__pid__127881#entry127881]}}
| A how-to by shideneyu for this modem can be found [http://www.pandorawiki.org/ZTE_K3565Z_3G_USB_Modem here]
|-
|-
| BandLuxe C270
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| A how-to by relliker for this modem can be found [http://www.pandorawiki.org/BandLuxe_C270_3G_USB_Modem here]
|-
| Huawei E156G
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/52827-3gumts-usb-dongle/page__view__findpost__p__835681]}}
|
|-
| Huawei E160
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| As the entry for Huawei E220 was wrong, this Current draw could also be wrong. This one definitely needs modemmanager. After installing modemmanager, it works flawlessly.
|-
| Huawei E160E
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| As the entry for Huawei E220 was wrong, this Current draw could also be wrong.
|-
| Huawei E1750
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__939350]}}
|
|-
| [[wikipedia:Huawei E220|Huawei E220]]
| Not required
| Standard-A
| USB 1.1
| 500mA
| Standard-A port via High Speed hub
| {{No|Not on new kernels.}}
| The successful Pandora E220 tests were done by DJWillis on an old kernel (long before Pandora shipped). It seems that they are NOT working any more. Also tested on Linux (was it working?) This entry originally said 250mA, but there is no source and current sources say 500mA.
|-
| 4G-Systems XS Stick P14
| Not required (usbserial module)
| standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__937681]}}
| Requires usbmodeswitch program.
|-
| iPhone 3GS (Probably also 1G/3G)
| ipheth
| Standard-A
| USB 2.0
| 500mA
| {{Unknown|USB A (Standard-A port?)}}
| {{Maybe|Should work in Angstrom with some work.}}
| Requires a good bit of dependencies to get working. Tested with Debian from SD, but should work in Angstrom with some work. The ipheth wwan0 device only provides a connection over the 3G modem, even if you're connected to a wifi network. I used the iproxy and SSH tunneling method with proxychains to get to the wifi network.
|-
| HTC Desire
| not required
| Standard-A
| USB 2.0
| 500mA
| {{Unknown|USB A (Standard-A port?)}}
| {{Yes}}
| Requires internet connection sharing to be enabled from the phone.
|-
| Samsung Galaxy Ace 2
| not required
| Micro-B female
| USB 2.0
| 500mA
| Standard-A port
| {{Yes}}
| Tested with phone firmware from T-Mobile (July 2012). Connect the USB cable, enable USB tethering on the phone, and connect to lfupdown on Pandora NetworkManager. Works with 3G and wifi.
|}

== USB to Ethernet adapters ==

To enable USB Ethernet adapters on the Pandora, you may need to left-click the networking icon on the panel in Xfce, and select "Ifupdown (bnep0)".

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Mbps
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Apple USB Ethernet Adapter MB442Z/A
|
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Reportedly uses an ASIX AX88xxx chipset.
|-
| Apple USB Ethernet Adapter model A1277
|
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 05ac:1402 Apple, Inc.
|-
| ASUS USB Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 200mA
| Standard-A port
| {{Yes}}
| ID 0b95:7e2b ASIX Electronics Corp. AX88772B
|-
| Conrad 3-Port-USB-Hub und Netzwerk-Adapter
|
| Not required
| Standard-A
| USB 2.0
| A lot! {{HideableNotes|50% of battery charge only brings you 2h40min (min brightness, no other devices attached)}}
| Standard-A port
| {{Yes}}
| Has a 3port USB Hub included. External power supply can (and should) be attached, not included though. ASIX Chipset. 20€ @ [http://www.conrad.de/ce/de/product/976406/NOTEBOOK-MINI-DOCKINGSTATION-USBRJ45/SHOP_AREA_32315&promotionareaSearchDetail=005 Conrad Electronics]. Not tested in Linux.
|-
| Logitec USB 2.0 LAN-GTJ/U2B Ethernet adapter
| 10/100/1000
| Not required
| Standard-A
| USB 2.0
| 450mA (lsusb) 1000Mbps=350mA 100Mbps=230mA 10Mbps=220mA(documentation)
| Standard-A port
| {{Yes}}
| ID 0b95:1780 ASIX Electronics Corp. AX88178 [http://www.logitec.co.jp/products/lan/langtju2b/index.php]
|-
| Logitec USB 2.0 LAN-TX/U2B Ethernet adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA (lsusb) 100Mbps=170mA 10Mbps=210mA (documentation)
| Standard-A port
| {{Yes}}
| ID 0b95:772a ASIX Electronics Corp.[http://www.logitec.co.jp/products/lan/lantxu2b/index.php]
|-
| Logitec USB 2.0 LAN-TX/U2H3S Ethernet adapter + 3 USB ports
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA (lsusb) 300mA (documentation)
| Standard-A port
| {{Yes}}
| ID 0b95:772a ASIX Electronics Corp. USB hub current: 100mA (lsusb) 200mA (documentation). [http://www.logitec.co.jp/products/lan/lantxu2h3/index.php] [http://www.amazon.com/USB-2-0-3-Port-Ethernet-Adapter/dp/B002OFJRW6/ref=sr_1_3?ie=UTF8&qid=1357779881&sr=8-3&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Encore-ENUET-3USB-3-Port-Ethernet-Adapter/dp/B0036FZJX4/ref=sr_1_1?ie=UTF8&qid=1357779881&sr=8-1&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Addlogix-3-port-USB-Hub-Ethernet/dp/B0030DO7OY/ref=sr_1_27?ie=UTF8&qid=1357780088&sr=8-27&keywords=USB+ethernet+with+3+port+USB+hub]
|-
| Wii USB 2.0 10/100M adapter (use [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=86;71;101 ASIX AX 88772 USB 2.0 chip])
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 0b95:7720 ASIX Electronics Corp. AX88772. [http://www.dealextreme.com/details.dx/sku.5926 This clone from DealExtreme] works too.
|-
| Connectland USB 2.0 10/100M Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 0b95:7720 ASIX Electronics Corp. AX88772 - Works fine, Sometimes a reboot is necessary (ZaxxonHF5RC1).
|-
| Belkin Gigabit USB 2.0 Network Adapter
| 10/100/1000
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| The shape of it make is a bit awkward to fit if you connect it directly, but it has a short adapter cable. I only get ~95Mbit on a gigabit network, but then the pandora's cpu maxes out. (it may be that the driver/usb stack isn't very well optimized), has horribly bright blue LEDs.
|-
| MosChip MCS7830 USB 10/100 Ethernet adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Yes}}
| ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter. Kernel module: mcs7830.
|-
| EU.MARK USB 10/100M RJ45 Ethernet Network Adapter Dongle
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| USB ID: 9710:7830 - bought from [http://www.dealextreme.com/details.dx/sku.22684 DealExtreme]
|-
| Digitus DN-10050 Fast Ethernet USB Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| MosChip MCS7830-based adapter. USB ID 9710:7830.
|-
| Edimax EU-4230 Fast Ethernet USB Adapter with 3-port USB hub [http://edimax.ie/images/Image/datasheet/USB/EU-4230/EU-4230_Datasheet.pdf]
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Ethernet USB ID 0b95:772a ASIX Electronics Corp. 3-port USB2.0 hub USB ID 0409:005a NEC Corp. Optional power adapter for USB hub.
|-
| Peabird USB v2.0 Fast Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Yes}}
| ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter. Consumes a lot of current. Fragile, the protective plastic cord cracked after one month. Hot. A blue light a bit too flashy. Definitely avoid this model.
|-
| SIIG JU-NE0012-S1 USB 2.0 Fast Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Bought from [http://www.newegg.com/Product/Product.aspx?Item=N82E16812191163 Newegg]
|-
| TRENDnet USB to Gigabit Ethernet Adapter TU2-ETG
| 10/100/1000
| Not required
| Standard-A
| USB 2.0
| 450mA (lsusb) Dormant: 5mA Static: 91mA Working: 131mA (documentation)
| Standard-A port
| {{Yes}}
| Rev. 2.0R ID 0b95:1780 ASIX Electronics Corp. AX88178 [http://www.trendnet.com/products/proddetail.asp?prod=275_TU2-ETG&cat=42] Rev. 2.0R is white, previous versions are blue and consumes more current. The documentation's current draw are reported for 10 and 100Mbps.
|-
| Novatel Wireless Jetpack 4620L
|
| cdc_ether
| Standard-A
| USB
| High drain; 95% charge = 6:00 battery life.
| Standard-A port
| {{Yes}}
| This is a LTE/EVDO/CDMA/HSPA/UMTS/EDGE/GPRS Wifi Hotspot device; Device is registered as a USB Ethernet device when connected through USB tethered (as opposed to Wifi) connection. USB ID 1410:b008
|-
| LOGILINK UA0174A Fast Ethernet USB Adapter with 3-port USB hub
| 10/100
| Not required
| Standard-A
| USB 2.0
| about 300mA
| Standard-A port
| {{Yes}}
| This is a combined USB 2.0 3Port Hub and USB to Ethernet adapter. ID 0b95:772b ASIX Electronics Corp. AX88772C; bought at [http://www.reichelt.de/Netzwerkkarten/LOGILINK-UA0174A/3//index.html?ACTION=3&GROUPID=5822&ARTICLE=132333&SEARCH=usb%20ethernet&OFFSET=16&WKID=0&]
|}

== USB to serial adapters ==
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| pl203
| usbserial
| Standard-A
| USB 1.1
| 100mA. A powered hub is needed.
| Standard-A port
| {{Yes}}
| A powered hub is needed. Plug the device, then load USB modules. ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port.
|-
| SparkFun FTDI Basic Breakout
| not required
| Mini-B female
| USB 1.1
| <100mA
| OTG port
| {{Yes}}
| Tested the variant sold by eBay seller "goodlucksell".
|}

== USB WiFi adapters ==

The Pandora stock kernel may not come with all wireless driver support outside of the internal WiFi chip. Sometimes, the only way you'll get wireless working is to build your own kernel with it included or try [http://wireless.kernel.org/en/users/Download compat-wireless].

As for hofix 6a4 compat-wireless seems to be present in the kernel out of the box, so one can build a USB wireless driver for Pandora following this [http://boards.openpandora.org/index.php?/topic/5140-solvedbuilding-a-usb-wifi-driver/page__view__findpost__p__89280 algorithm]

As for [[hotfix 6]] Release Candidate the kernel includes drivers for these Realtek chips: RTL8712/8188/8191/8192SU/8192CU

See also [http://boards.openpandora.org/index.php?/topic/7160-micro-wifi-dongle/ this thread] on the forums for the latest.

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Tested on Pandora
! Additional comments
|-
| Advance Mini Wireless N150
| rtl8192cu
| Standard-A
| USB 2.0
| 500mA
| USB A
| {{Yes|Yes}}
| There's a little hole on it, so it's useful for attaching it to the OP.
|-
| ASUS WL-167G v2
| rt73usb + rt2x00usb + rt2x00lib
| Standard-A
| USB 2.0
| 300mA
| USB A
| {{Yes|Works under Slackware, not (without a hub) under Zaxxon, which become very unstable}}
| 0b05:1723 ASUSTek Computer, Inc. WL-167G v2 802.11g Adapter [Ralink RT73]. Works pretty fine on Linux PC.
|-
| Belkin N1 Wireless USB Adapter (F5D8051) ("Ver. 2053") (MARVELL v1021)
| N/A
| Standard-A
| USB 2.0
| {{Unknown}}
| No connection was attempted.
| {{No|No native driver support and ndiswrapper obviously won't work.}}
| There's a previous revision of this dongle which is supposed to have a Ralink chip, but they revised it and put a different chip inside. Reported (by whom?) to work with ndiswrapper and works in Linux.
|-
| Belkin Surf micro
| rtl8192cu
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Cisco/Linksys AE1000 High Performance Wireless-N USB Adapter
| rt3572sta (RT3572USB)
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A (Standard-A port?)
| {{Yes|Works with a modified driver.}}
| (Compiled module for pandora:[http://boards.openpandora.org/index.php?/topic/1992-linksys-ae1000-usb-wifi/ pandora forum]) Download the driver from [http://www.ralinktech.com/support.php?s=2 ralink's driver site], edit ./common/rtusb_dev_id.c, before "#endif // RT2870" add "{USB_DEVICE(0x13B1,0x002F)},", compile.' Reported (by whom?) to work in Linux.
|-
| D-Link WIRELESS G USB ADAPTER DWL-G122 rev.E1 F/W 5.00
| rt2870sta + rt2800usb + rt2800lib
| Standard-A
| USB 2.0
| 450mA
| USB A
| {{Yes|Works under Slackware, not (without a hub) under Zaxxon, which become very unstable}}
| 07d1:3c0f D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.E) [Ralink RT2870]. Works pretty fine on Linux PC.
|-
| Digitus Wireless 150N USB 2.0 Adapter
| rtl8192cu
| Standard-A
| USB 2.0
| 500mA
| USB A
| {{Yes|Yes}}
| Bundled with a non-WiFi Pandora coming from Craig's shop
|-
| Edimax EW-7811Un
| rtl8192cus
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Havit HV-WF15
| n/a
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since SuperZaxxon}}
|-
| Netgear WNA1000M
| rtl8192cu
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Thomson WLG-1500A
| ?
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{No|Doesn't work.}}
| 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter
|-
| TRENDnet TEW-424UB V2
| ?
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{No|lsusb shows it, but no module is loaded}}
| 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter. Same behavior on a PC.
|-
| Alfa Network AWUS036H 1000mw
| RTL8187
| IEEE 802.11b/g
| USB 2.0
| ?
| USB A
| {{Yes|Yes}}
| can be found on ebay; tested with Beta 3
|-
| TP-Link 150Mbps Mini Wireless N
| rtl8192cu
| Standard-A
| USB 2.0
| Unknown
| USB A
| {{Yes|Yes}}
| Model No TL-WN723N. Tested with WPA2. Works out of the box. Cheap to buy (£6.99 from pcworld in the UK).
|-
| TP-Link 150Mbps '''Nano''' Wireless N
| rtl8192cu
| Standard-A
| USB 2.0
| Unknown
| USB A
| {{Yes|Yes}}
| Model No TL-WN725N. Works out of the box. From Reichelt.de. Claims to be RaspberryPi compatible on their website.
|-
| TP-Link Atheros AR9170
| carl9170-1.fw
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{Yes|Yes}}
| Model No TL-WN821N. Works out of the box. ID 0cf3:1002
|-
|}

== DVB/TNT/TDT ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Module(s)
! Firmware
! Additional comments
|-
| AVerMedia AVerTV Volar Green HD
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| Should work
| af9033 tda18218
| dvb-usb-af9035-02.fw
| ID 07ca:a835 AVerMedia Technologies, Inc.
HD/PRO (A835)
|-
| AVerMedia AVerTV Volar Video Capture
| Standard-A
| USB 2.0
| Reported as 0mA. More likely to be 500mA
| Standard-A port
| ?
| ?
| ?
| ID 07ca:4830 AVerMedia Technologies, Inc.
H830
|-
| Hauppauge WinTV aero
| Standard-A
| USB 2.0
| 100mA
| Standard-A port
| {{Yes|Yes}}
| smsmdtv
| sms1xxx-hcw-55xxx-dvbt-02.fw
| ID 2040:b900 Hauppauge . Also works on the mini-usb port.
|-
| Hauppauge WinTV-HVR 930C
| Standard-A
| USB 2.0
| 150mA
| Standard-A port
| {{No}}
| em28xx xc5000
| dvb-usb-hauppauge-hvr930c-drxk.fw dvb-fe-xc5000-1.6.114.fw
| ID 2040:1605 Hauppauge . Not able to get it to work yet. Embedded Remote control ID: 0525:a4aa
|-
| MSI Digi Vox Min
| Standard-A
| USB 2.0
| ?
| Standard-A port
| {{Yes|Yes}}
| ?
| ?
| Realtek rtl2832u chipset
|-
|}

= Storage =

== External Hard Disk Drives ==
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! style="min-width: 120px" | Works on Pandora
! Additional comments
|-
| Freecom 250GB 2.5" portable
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Inside it's a Samsung Model HM251JX. {{HideableNotes|So I guess anything based on that will also work OK.}}
|-
| (Intenso)® 2.5" MEMORYSTATION 1TB
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
|
|-
| LaCie Rikiki 250GB USB 2.0 2.5" Hard Drive
| Not required
| standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port via powered High Speed Hub
| {{Partial|Not when unpowered, needs testing with a powered hub}}
| Not only does it fail to spin up, but it causes the Pandora's screen to pulsate wildly, much like an old CRT would if you placed a speaker or a magnet near to it. Not tested with a powered hub.
|-
| Seagate Seagate® Expansion™ External Drives
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{No}}
| Tested by [http://www.gp32x.com/board/index.php?/user/14781-hitnrun/ Hitnrun]. "Isn't even detected in lsusb (drive powered by external power source)"
|-
| Verbatim 250GB Model #47580 Hard Drive
| Not required
| Direct
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__877512 almatuk]. {{HideableNotes|"Watched videos directly from it at full speed, no need for powered USB hub. Had issues playing roms directly off it however as it was formatted NTFS. I'm sure if I formatted to FAT32 these would disappear."}}
|-
| Western Digital 160GB Elements External USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| standard-A port via powered High Speed Hub
| {{Yes}}
|
|-
| Western Digital 250GB Elements Portable USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct or standard-A port via High Speed Hub
| {{Yes}}
|
|-
| Western Digital 250GB My Passport Essential USB 2.0 2.5" Hard Drive
| Not required
| {{Unknown|Direct?}}
| USB 2.0
| {{Unknown}}
| {{Unknown|Direct?}}
| {{Partial|Maybe}}
| Tested by TheDarkSpectrum48K. The first time it [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__877386 "works perfectly!"]. The second time [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__882635 it didn't work].
|-
| Western Digital 400GB My Passport Essential USB 2.0 2.5" HDD model WDME4000TE
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://www.gp32x.com/board/index.php?/user/14534-peca/ Peca].
|-
| Western Digital 500GB Elements Portable External Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [[User:Esn|Esn]]. {{HideableNotes|The USB cable that came with it was bad, so I used another one.[http://www.gp32x.com/board/index.php?/topic/59494-solved-how-do-i-get-my-wd-500gb-external-hard-drive-to-work-properly/page__view__findpost__p__949863]}}
|-
| Western Digital 500GB My Passport Essential External Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [[User:Esn|Esn]]. Works fine. {{HideableNotes|Came pre-formatted in NTFS, but should work if you downloaded the community codec pack. It said 1TB on the packaging, but there was 465GB free space, so I'm pretty sure it was actually the 500GB one.}}[http://www.gp32x.com/board/index.php?/topic/59494-solved-how-do-i-get-my-wd-500gb-external-hard-drive-to-work-properly/page__view__findpost__p__949645]
|-
| Western Digital 1TB My Passport Essential SE External USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct or through powered High Speed Hub
| {{Yes}}
| Tested by [http://http://www.gp32x.com/board/index.php?/user/19191-mycohl/ Mycohl]. {{HideableNotes|Externally powered hub recommended to conserve battery power.}}
|-
| Western Digital Elements 2TB 3.5" Hard Drive Model:WDBAAU0020HBK
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://boards.openpandora.org/index.php?/user/430-kilowatt/ kilowatt].
|}

== DVD/CD Drives ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Lite-On EZ-DUB DVD/CD Multi-Recorder (Model eZAU120)
| Not required
| Standard-A
| USB 2.0
| Powered by included mains adapter - DC 12V 1.8A
| Standard-A port
| {{No}}
| Works in Linux.
|-
| Memorex 20x Multi Format DVD Recorder External - DVD±RW (±R DL)
| Not required
| Standard-A
| USB 2.0
| Powered by included mains adapter
| Standard-A port
| {{Yes}}
|
|}

= Video display device =

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Output connectors
! Works on Pandora
! Additional comments
|-
| Tritton see2 usb 2.0 to SVGA adapter
| sisusb
| USB
| USB 2.0
| {{Unknown|High {{HideableNotes|Reduces Pandora's battery life in half (10h → 4h)}}}}
| VGA (D-SUB)
| {{Partial|Yes, but has performance issues.}}
| Needs to be integrated with preferences. {{HideableNotes|Currently I (who?) must edit xorg.conf and mess with xinerama.}} Good for presentations, dragging a window is bearable, but hi-res video is slow. Works in Linux without any issues.
|-
| DisplayLink usb 2.0 to SVGA adapter WS Tech USB-DVI
| udlfb
| USB
| USB 2.0
| 500mA
| VGA (D-SUB)
| Yes
| 17e9:0198 DisplayLink. No hub needed. Module and userspace here:
git clone http://git.plugable.com/webdav/udlfb/
git clone http://git.plugable.com/webdav/xf-video-udlfb/
|-
| Plugable DisplayLink UGA-165
| ?
| Mini-B female
| USB 2.0
| ?
| DVI/VGA/HDMI
| {{Yes}}
| In /etc/X11, copy xorg.conf.DisplayLink to xorg.conf then '''log out''' with the device attached [http://pandoralive.info/?p=3423]
|-
| Magic Control Technology Corp. Trigger II External Graphics
| sisusb
| USB
| USB 2.0
| 500mA
| ?
| ?
| ID 0711:5200 Magic Control Technology Corp. A kernel recompile is needed. In /usr/src/linux/drivers/usb/misc/sisusbvga , edit sisusb.c , and add

{ USB_DEVICE(0x0711, 0x5200) },

in the list around line 3250
Get the latest xf86-video-sisusb driver here:
http://xorg.freedesk...ividual/driver/

|}

= Video capture devices =

== Webcams ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Exoo No Driver/USB 2.0 Webcam (Model No.: M053)
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{No}}
| Bought from [http://www.dealextreme.com/details.dx/sku.14991 DealExtreme]. Works in Linux.
|-
| Logitech Quickcam Communicate Deluxe
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{No}}
| USB ID: 046d:0992, works though [http://linux-uvc.berlios.de/ uvcvideo]. Works in Linux.
|-
| Logitech Webcam c210
| Not required
| Standard-A
| USB 2.0
| 170mA
| Standard-A port
| {{Yes}}
| ID 046d:0819 <unnamed>. Video and Audio recognized, tested to work.
|-
| Logitech HD Webcam C270 720p
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Partial|Yes, but audio untested}}
| ID 046d:0825 Logitech, Inc. Audio recognized, but not tested. More info to come. Works in Linux.
|-
| Logitech HD Webcam Pro 9000
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Partial|Yes, but audio untested}}
| ID 046d:0990 Logitech, Inc. Audio recognized, but not tested. Great Picture! Works in Linux.
|}

= Audio devices =

== Microphones/recorders ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| [http://www.bluemic.com/yeti/] Blue Yeti
| not required
| standard-A
| unknown
| unknown
| standard-A port via High Speed USB hub
| {{unknown|Not thoroughly tested.}}
| Very roughly tested 2012-06-13 by [[user:spiralofhope|spiralofhope]] using Mumble. More testing required. {{HideableNotes|The system recognizes the Yeti, and it appears in Mumble's list of available devices, but the audio wizard doesn't show the Yeti as having input. Additional troubleshooting is required, as is checking the manual/company website for missing information.}}
|-
| [http://www.zoom.co.jp/english/products/h2/] Zoom H2 Handy Recorder
| not required
| standard-A
| USB 1.1
| 300mA
| standard-A port via High Speed USB hub
| {{Yes|Yes, needs a USB hub.}}
| Can record into Audacity, but won't be recognized unless connected through USB hub.[http://www.gp32x.com/board/index.php?/topic/59301-audacity-1-3-12/page__view__findpost__p__947602].
|}

== MIDI controllers ==

EvilDragon bundled the usb MIDI class drivers in the default firmware image, therefore ANY class-compliant MIDI device should work with the Pandora, out of the box.[http://www.gp32x.com/board/index.php?/topic/58523-zynaddsubfx/page__view__findpost__p__938432]

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Akai LKP25
| Not required
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/58523-zynaddsubfx/page__view__findpost__p__938432]}}
|
|-
| M-Audio MIDISPORT 2x2 Anniv
| Not required
| {{Unknown}}
| {{Unknown}}
| 400mA
| {{Unknown}}
| {{Unknown}}
| ID 0763:1050 Midiman. High current draw!
|-
|}

== USB audio controllers ==

Some are "professional soundcard"; see [http://en.wikipedia.org/wiki/Sound_card#Professional_soundcards_.28audio_interfaces.29 definition on Wikipedia].

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Cakewalk UA-1G
| not required
| Standard-A
| USB 2.0
| 200mA
| Standard-A port
| {{Yes}}
| ID 0582:00e9 Roland Corp. This device may be similar to older Edirol/Roland USB audio devices. Runs and record under Slackware. Jack audio server realtime recording works. Recognized but not tested under official OS. A hub, powered or not, is needed.
|-
| Connectland AUDIO ADAPTER
| not required
| Standard-A
| USB 2.0
| 100mA
| Standard-A port
| {{Yes}}
| ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter . CMedia CM108 Virtual 7.1 Channel Sound. Has vol +, vol -, mute headspeaker, mute mic buttons. Mini-jack audio in and out. A non-powered hub is needed.
|}

= Input devices =

Any HID ([http://en.wikipedia.org/wiki/Human_interface_device Human Interface Device]) compliant keyboard, mouse or game controller should work on the Pandora. Most of those device are low speed or full speed USB device and will need to be connected though either a [[USB_reference#OTG host mode|USB OTG adapter/cable]] or a [[USB reference#What’s all this stuff about USB 1.1 and USB 2.0? Isn’t USB, uh, universal?|USB2 hub]] in order to work on the Pandora.

== External Game Controllers ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| 2-TECH SNES-to-USB adapter
| Not required
| Standard-A
| Low speed
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| USB description is "HuiJia USB GamePad", <tt>lsusb</tt> calls it "0e8f:3013 GreenAsia Inc."
|-
| USB Super RetroPort (SNES-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Bought from [http://www.retrousb.com/product_info.php?cPath=21&products_id=29 RetroZone]. Works in Linux.
|-
| USB RetroPort (NES-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Bought from [http://www.retrousb.com/product_info.php?cPath=21&products_id=28 RetroZone]. Works in Linux.
|-
| Trio Linker Plus II (PlayStation,-GameCube,-and-Dreamcast-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Bought from [http://www.play-asia.com/paOS-13-71-6m-49-en-70-1zfv.html Play-Asia]. Works in Linux.
|-
| NAZAR V47 USB Force Feedback Vibrating Gamepad Controller for PC
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Whether it really contains the claimed force feedback feature is unknown as this feature does not work under Linux - bought from [http://www.dealextreme.com/details.dx/sku.24551 DealExtreme]. Works in Linux.
|-
| 10-Fire-Button Double Vibration Feedback USB PC Arcade Joystick
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Whether it really contains the claimed force feedback feature is unknown as this feature does not work under Linux - bought from [http://www.dealextreme.com/details.dx/sku.27821 DealExtreme]. Works in Linux.
|-
| Official PlayStation 3 controller
| Not required
| Standard-A
| Full speed
| {{Unknown}}
| USB A To Mini B Cable via High Speed Hub
| {{unknown}}
| This is for USB not bluetooth compatibility. Sixaxis and DualShock not tested. Works in Linux.
|-
| Saitek PLC Cyborg Force Rumble Pad (P2500) - 06a3:ff0c
| {{unknown}}
| Standard-A
| {{unknown}}
| 5V
| Standard-A port via High Speed Hub
| {{Unknown|Not fully tested}}
| Partial test attempted 2012-06-24 by [[user:spiralofhope|spiralofhope]]. lsusb lists it. More testing required. {{HideableNotes|A gamepad testing procedure needs to be defined. See [[Joystick testing]].}}
|-
| Thrustmaster Firestorm Digital 3 Gamepad
| Not required
| Standard-A
| Low speed
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| ID 07b5:0213 Mega World International, Ltd Thrustmaster Firestorm Digital 3 Gamepad.
|-
| Wired Xbox 360 Controller
| xpad module
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| This also includes gamepads for PC that needs the Windows Xinput driver. Such gamepads include the Logitech Chillstream. Works in Linux.
|-
| WiseGroup.,Ltd SmartJoy Dual PLUS Adapter (dual PSX to USB joypad adapter)
| Not required
| Standard-A
| USB 1
| 100mA
| Standard-A port via USB 1-compatible High Speed Hub
| {{Yes}}
| ID 6677:8802. Works in Linux.
|-
| Logitech Cordless RumblePad 2
| Not required
| Standard-A
| Low speed
| 100mA
| Standard-A port via High Speed Hub
| {{Yes}}
| Product-ID: 0xc219, Vendor-ID: 0x046d (Logitech Inc.), [http://www.logitech.com/support/287 Official product support website],<br>All buttons worked fine in PCSX, analog sticks not tested, but likely work"
|-
|}

== Touchpads ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| [http://www.logitech.com/en-us/mice-pointers/mice/devices/8417 Logitech Wireless Touchpad]
| Not required
| Standard-A
| {{Unknown}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| Left and right four-finger swipes aren't mapped to anything by default in XFCE. They can be mapped as keyboard shortcuts.
|}

== Graphics tablets ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Works on Pandora
! Additional comments
|-
| Bamboo Multitouch
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{No|No [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__881806]}}
| It's not known if this works in Linux.
|-
| Genius Tablet
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Yes|Yes, [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__883140 via USB hub]}}
| It's not known if this works in Linux.
|-
| Wacom CTH-460
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{No|No [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__924422]}}
| Would need a patched driver to work. It's not known if this works in Linux.
|-
| Wacom Volito2 Tablet (Model: CTF-420)
| Not required
| Standard-A
| Low speed
| 40mA [http://www.my-volito.com/volito/specs.asp?lang=en]
| {{No}}
| USB ID: 056a:0062
|}

== Mice ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Connector
! Works on Pandora
! Additional comments
|-
| Apple Mouse (M5769)
| USB
| {{No}}
| Seems to disable USB port, reboot afterwards required
|-
| Apple Mouse with Scroll Ball (A1152)
| USB
| {{Yes|Yes, needs a USB hub.}}
|
|-
| Cherry Ghostcord [http://www.amazon.de/Cherry-M85-26005DE-2-B-Unlimited-Home-Rechargeable/dp/B001EDSE0U/ref=tag_stp_s2_edpp_url]
| USB
| {{Yes|Yes, needs a USB hub.}}
| Part of a bundle with keyboard and a USB dongle for the connetion. With the dongle on the hub both devices work just fine (tested in XFCE)
|}

= Electronics development =
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Microchip PICkit 2
| not required
| Mini-B female
| USB 1.1
| <100mA
| OTG port
| {{Yes}}
| The pk2cmd application compiles easily.
|-
| Arduino Uno
| not required
| Standard-B female
| USB 1.1
| 50mA
| OTG port
| {{Yes}}
|
|-
| Arduino Leonardo
| not required
| Micro-B female
| USB 1.1
| 50mA
| Standard-A port with hub
| {{Yes}}
| Connecting directly to the OTG port does not work.
|}

= Connectors, adapters, and hubs =

This section is intended as a general guide. Items in this section are standard USB accessories, so drivers are not required. Compatibility with Pandora is assumed. Please note that any external product links are provided for reference only, and are not an endorsement.

== OTG (On The Go) Adapters ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Works on Pandora
! Additional comments
|-
| Generic adapter
| {{No}}
| [http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=usb+otg+host+cable&_sacat=See-All-Categories Find on eBay] [http://www.amazon.co.uk/s/ref=nb_ss_ce?url=search-alias%3Delectronics&field-keywords=OTG+Cable+Adapter&x=3&y=23 Find on Amazon] These links are not 100% accurate. Check for `mini-a`, and on eBay, the price is higher by about $8.
|-
|Hama 00074214
| {{Yes}}
|[http://www.hama.de/00074214/hama-mini-usb-adapter-mini-usb-a-plug-usb-a-socket-015-m Manufacturer Page]
|-
| Nokia USB OTG adapter
| {{Yes}}
| [http://www.electronicproductonline.com/catalog/product_info.php?cPath=35_67&products_id=2043 Electronic Product Online]
|}

== Compact USB Hubs ==

Be sure to enable USB-host!

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Works on Pandora
! Additional comments
|-
| Griffin SmartShare USB [http://www.griffintechnology.com/products/smartshare-usb]
| {{No}}
|
|-
| Belkin F5U415 4 Port USB 2.0 Swivel Hub [http://catalog.belkin.com/IWCatProductPage.process?Product_Id=377085]
| {{No}}
| Comes with an optional power adapter.
|-
| Belkin F5U700 USB 2.0 7-Port Lighted Hub [http://www.belkin.com/uk/support/article/?lid=enu&pid=F5U700ea&aid=10289&scid=947]
| {{Yes}}
| Tested 2012-06-16 by [[user:spiralofhope|spiralofhope]] both with and without its power adapter.
|-
| Belkin F5U701 USB 2.0 7 Port Mobile Hub [http://www.belkin.com/IWCatProductPage.process?Product_Id=369788]
| {{Yes}}
| Tested by pabloh. Comes with an optional power adapter.
|-
| ID 0e8f:0016 GreenAsia Inc.
| {{No}}
| Tested by tsh. Labeled as high speed. Bought from ebay.
|-
| ID 05e3:0608 Targus with Genesys Logic 4 Port USB 2.0 Hub
| {{Yes}}
| Tested by Kazuki. Works.
|-
|Trust 4 port netbook hub ID 05e3:0608
| {{Yes}}
| Tested by tsh. Bought from [http://www.amazon.co.uk/gp/product/B0025X16AS Amazon].
|-
| High Speed 4 Port Mini USB 2.0 Hub for Laptop PC (non powered)
| {{Yes}}
| Octopus-style small cheap unpowered USB hub. Bought from [http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&item=270538502843 ebay]
|-
| Keeptech USB 2.0 Hub (7 Ports) with Power Adapter, KT-UH703 [http://www.keeptech.com/books_show.php?id=144]
| {{Yes}}
| Tested by [[User:Esn|Esn]]. Works powered or unpowered.
|-
| Logitech Premium 4-Port USB Hub [http://www.logitech.com/en-in/notebook-products/usb-hubs/devices/3048]
| {{Yes}}
|
|-
| LUPO 7-port USB 2.0 Hub (cheap octopus type which can be powered as there is dc socket)
| {{Partial|Yes. {{HideableNotes|Can use a power supply but wasn't tested with one.}}}}
| Tested by kilowatt. Bought from [http://www.amazon.co.uk/gp/product/B003BVDABG/ref=oss_product from amazon uk]
|-
| LogiLink USB 2.0 Hub 4-Port UA0086 [http://www.logilink.eu/showproduct/UA0086.htm]
| {{Yes}}
| Tested by Jones. Comes with an optional power adapter.
|-
| Logitec USB 2.0 LAN-TX/U2H3S Ethernet adapter + 3 USB ports [http://www.logitec.co.jp/products/lan/lantxu2h3/index.php]
| {{Yes}}
| See [http://pandorawiki.org/USB_compatibility_list#USB_to_Ethernet_adapters USB to ethernet adapters] for more details. USB 1 devices work perfectly. Also available as other brands: [http://www.amazon.com/USB-2-0-3-Port-Ethernet-Adapter/dp/B002OFJRW6/ref=sr_1_3?ie=UTF8&qid=1357779881&sr=8-3&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Encore-ENUET-3USB-3-Port-Ethernet-Adapter/dp/B0036FZJX4/ref=sr_1_1?ie=UTF8&qid=1357779881&sr=8-1&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Addlogix-3-port-USB-Hub-Ethernet/dp/B0030DO7OY/ref=sr_1_27?ie=UTF8&qid=1357780088&sr=8-27&keywords=USB+ethernet+with+3+port+USB+hub]
|-
| Rosewill RHB-220 4-port USB 2.0 Hub
| {{Yes}}
| Tested by Tyrant1919. Unpowered. Bought from [http://www.newegg.com/Product/Product.aspx?Item=N82E16817182168 Newegg].
|-
| i-rocks SLEEK HUB USB 2.0 4 Ports Hub [http://www.i-rocks.com/Product_detail.aspx?CLASS_ID=1036&PRODUCT_ID=1080]
| {{Yes}}
| Comes with an ac adapter, but can be used without. USB 1 devices work perfectly.
|-
| MSI StarHub201
| {{Yes}}
| Testet by mclien with keyboard and mouse in XFCE, unpowered, not on the MSI site (discontinnued, guess) [http://alatest.dk/anmeldelser/hubs-og-switches/msi-star-hub-201/po3-34222999,42/]
|}

[[Category:USB]]
[[Category:List]]

USB compatibility list

2014-10-03T22:41:16Z

A2000: added LOGILINK UA0174A

This is a list of USB devices that have been tested on the Pandora. If the device you want to know about isn't listed here, don't worry! Just go to [[USB_reference|the USB reference page]], look up the specs of your device, and you may be able to figure out if it's compatible.

= Troubleshooting =

Each type of device will have its own unique way to troubleshoot.

But here are some general tips:

* Is USB-Host enabled?
* check <tt>lsusb</tt>
* check <tt>dmesg</tt>

When asking for help on [http://boards.openpandora.org/index.php?/forum/8-support/ the forums support board], be sure to post both your <tt>lsusb</tt> and <tt>dmesg</tt>.

Because <tt>dmesg</tt> output is very long, you need to paste it within [spoiler] tags like this:

[spoiler]
(paste your dmesg in here)
[/spoiler]

An easy way to get your <tt>dmesg</tt> so you can easily copy and paste it, is:

dmesg|leafpad

<tt>leafpad</tt> will open with the output of <tt>dmesg</tt>.

If you have no networking on your palmtop, you can send the information to a text file like this:

cd (your storage card)
dmesg>textfile.txt
sync

Then you can remove your card (if no programs are using it or PNDs are running on it) and bring it to a card reader on your desktop.

= Networking =

Please see the [[Mobile Broadband]] page for tips on how to get these working, as well as [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/ this tutorial] from the GP32X forum.

== HSDPA (3G) Modems ==

Please note that many (if not all) USB 3G modems need modemmanager to be installed for switching from mass storage mode to serial communications mode. When first plugged in, most 3G USB modems claim to be a mass storage device and offer, on its built-in flash, drivers and connectivity software to be installed. Mostly this is only for Windows and Mac, so for the Pandora this is not useful. modemmanager instantly takes care of toggling the mode, so that when you plug in the modem, after a few seconds or maybe half a minute modemmanager has switched the modem to communications mode and NetworkManager is able to use it.

If you are using a Firmware before HF7 (or one of its Alpha/Beta versions) you have to install modemmanager. To do so, connect your Pandora to the Internet, open a terminal and, as a super user, intall it via opkg by entering the commands:

:sudo opkg update
:sudo opkg install modemmanager

'''Note:''' If you are using a firmware more recent than "Zaxxon" Hotfix 6 (starting with HF7) you do not have to follow the steps outlined above since modemmanager comes preinstalled.

'''Note 2:''' After plugging in the USB 3G modem, it may take some time until NetworkManager is able to use the modem. Wait for at least half a minute, until you give up and report that the modem doesn't work.

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| ZTE K3565-Z / MF626 / MF627 / MF636
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__956513] [http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__pid__127881#entry127881]}}
| A how-to by shideneyu for this modem can be found [http://www.pandorawiki.org/ZTE_K3565Z_3G_USB_Modem here]
|-
|-
| BandLuxe C270
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| A how-to by relliker for this modem can be found [http://www.pandorawiki.org/BandLuxe_C270_3G_USB_Modem here]
|-
| Huawei E156G
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/52827-3gumts-usb-dongle/page__view__findpost__p__835681]}}
|
|-
| Huawei E160
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| As the entry for Huawei E220 was wrong, this Current draw could also be wrong. This one definitely needs modemmanager. After installing modemmanager, it works flawlessly.
|-
| Huawei E160E
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| As the entry for Huawei E220 was wrong, this Current draw could also be wrong.
|-
| Huawei E1750
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__939350]}}
|
|-
| [[wikipedia:Huawei E220|Huawei E220]]
| Not required
| Standard-A
| USB 1.1
| 500mA
| Standard-A port via High Speed hub
| {{No|Not on new kernels.}}
| The successful Pandora E220 tests were done by DJWillis on an old kernel (long before Pandora shipped). It seems that they are NOT working any more. Also tested on Linux (was it working?) This entry originally said 250mA, but there is no source and current sources say 500mA.
|-
| 4G-Systems XS Stick P14
| Not required (usbserial module)
| standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__937681]}}
| Requires usbmodeswitch program.
|-
| iPhone 3GS (Probably also 1G/3G)
| ipheth
| Standard-A
| USB 2.0
| 500mA
| {{Unknown|USB A (Standard-A port?)}}
| {{Maybe|Should work in Angstrom with some work.}}
| Requires a good bit of dependencies to get working. Tested with Debian from SD, but should work in Angstrom with some work. The ipheth wwan0 device only provides a connection over the 3G modem, even if you're connected to a wifi network. I used the iproxy and SSH tunneling method with proxychains to get to the wifi network.
|-
| HTC Desire
| not required
| Standard-A
| USB 2.0
| 500mA
| {{Unknown|USB A (Standard-A port?)}}
| {{Yes}}
| Requires internet connection sharing to be enabled from the phone.
|-
| Samsung Galaxy Ace 2
| not required
| Micro-B female
| USB 2.0
| 500mA
| Standard-A port
| {{Yes}}
| Tested with phone firmware from T-Mobile (July 2012). Connect the USB cable, enable USB tethering on the phone, and connect to lfupdown on Pandora NetworkManager. Works with 3G and wifi.
|}

== USB to Ethernet adapters ==

To enable USB Ethernet adapters on the Pandora, you may need to left-click the networking icon on the panel in Xfce, and select "Ifupdown (bnep0)".

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Mbps
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Apple USB Ethernet Adapter MB442Z/A
|
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Reportedly uses an ASIX AX88xxx chipset.
|-
| Apple USB Ethernet Adapter model A1277
|
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 05ac:1402 Apple, Inc.
|-
| ASUS USB Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 200mA
| Standard-A port
| {{Yes}}
| ID 0b95:7e2b ASIX Electronics Corp. AX88772B
|-
| Conrad 3-Port-USB-Hub und Netzwerk-Adapter
|
| Not required
| Standard-A
| USB 2.0
| A lot! {{HideableNotes|50% of battery charge only brings you 2h40min (min brightness, no other devices attached)}}
| Standard-A port
| {{Yes}}
| Has a 3port USB Hub included. External power supply can (and should) be attached, not included though. ASIX Chipset. 20€ @ [http://www.conrad.de/ce/de/product/976406/NOTEBOOK-MINI-DOCKINGSTATION-USBRJ45/SHOP_AREA_32315&promotionareaSearchDetail=005 Conrad Electronics]. Not tested in Linux.
|-
| Logitec USB 2.0 LAN-GTJ/U2B Ethernet adapter
| 10/100/1000
| Not required
| Standard-A
| USB 2.0
| 450mA (lsusb) 1000Mbps=350mA 100Mbps=230mA 10Mbps=220mA(documentation)
| Standard-A port
| {{Yes}}
| ID 0b95:1780 ASIX Electronics Corp. AX88178 [http://www.logitec.co.jp/products/lan/langtju2b/index.php]
|-
| Logitec USB 2.0 LAN-TX/U2B Ethernet adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA (lsusb) 100Mbps=170mA 10Mbps=210mA (documentation)
| Standard-A port
| {{Yes}}
| ID 0b95:772a ASIX Electronics Corp.[http://www.logitec.co.jp/products/lan/lantxu2b/index.php]
|-
| Logitec USB 2.0 LAN-TX/U2H3S Ethernet adapter + 3 USB ports
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA (lsusb) 300mA (documentation)
| Standard-A port
| {{Yes}}
| ID 0b95:772a ASIX Electronics Corp. USB hub current: 100mA (lsusb) 200mA (documentation). [http://www.logitec.co.jp/products/lan/lantxu2h3/index.php] [http://www.amazon.com/USB-2-0-3-Port-Ethernet-Adapter/dp/B002OFJRW6/ref=sr_1_3?ie=UTF8&qid=1357779881&sr=8-3&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Encore-ENUET-3USB-3-Port-Ethernet-Adapter/dp/B0036FZJX4/ref=sr_1_1?ie=UTF8&qid=1357779881&sr=8-1&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Addlogix-3-port-USB-Hub-Ethernet/dp/B0030DO7OY/ref=sr_1_27?ie=UTF8&qid=1357780088&sr=8-27&keywords=USB+ethernet+with+3+port+USB+hub]
|-
| Wii USB 2.0 10/100M adapter (use [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=86;71;101 ASIX AX 88772 USB 2.0 chip])
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 0b95:7720 ASIX Electronics Corp. AX88772. [http://www.dealextreme.com/details.dx/sku.5926 This clone from DealExtreme] works too.
|-
| Connectland USB 2.0 10/100M Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 0b95:7720 ASIX Electronics Corp. AX88772 - Works fine, Sometimes a reboot is necessary (ZaxxonHF5RC1).
|-
| Belkin Gigabit USB 2.0 Network Adapter
| 10/100/1000
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| The shape of it make is a bit awkward to fit if you connect it directly, but it has a short adapter cable. I only get ~95Mbit on a gigabit network, but then the pandora's cpu maxes out. (it may be that the driver/usb stack isn't very well optimized), has horribly bright blue LEDs.
|-
| MosChip MCS7830 USB 10/100 Ethernet adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Yes}}
| ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter. Kernel module: mcs7830.
|-
| EU.MARK USB 10/100M RJ45 Ethernet Network Adapter Dongle
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| USB ID: 9710:7830 - bought from [http://www.dealextreme.com/details.dx/sku.22684 DealExtreme]
|-
| Digitus DN-10050 Fast Ethernet USB Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| MosChip MCS7830-based adapter. USB ID 9710:7830.
|-
| Edimax EU-4230 Fast Ethernet USB Adapter with 3-port USB hub [http://edimax.ie/images/Image/datasheet/USB/EU-4230/EU-4230_Datasheet.pdf]
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Ethernet USB ID 0b95:772a ASIX Electronics Corp. 3-port USB2.0 hub USB ID 0409:005a NEC Corp. Optional power adapter for USB hub.
|-
| Peabird USB v2.0 Fast Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Yes}}
| ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter. Consumes a lot of current. Fragile, the protective plastic cord cracked after one month. Hot. A blue light a bit too flashy. Definitely avoid this model.
|-
| SIIG JU-NE0012-S1 USB 2.0 Fast Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Bought from [http://www.newegg.com/Product/Product.aspx?Item=N82E16812191163 Newegg]
|-
| TRENDnet USB to Gigabit Ethernet Adapter TU2-ETG
| 10/100/1000
| Not required
| Standard-A
| USB 2.0
| 450mA (lsusb) Dormant: 5mA Static: 91mA Working: 131mA (documentation)
| Standard-A port
| {{Yes}}
| Rev. 2.0R ID 0b95:1780 ASIX Electronics Corp. AX88178 [http://www.trendnet.com/products/proddetail.asp?prod=275_TU2-ETG&cat=42] Rev. 2.0R is white, previous versions are blue and consumes more current. The documentation's current draw are reported for 10 and 100Mbps.
|-
| Novatel Wireless Jetpack 4620L
|
| cdc_ether
| Standard-A
| USB
| High drain; 95% charge = 6:00 battery life.
| Standard-A port
| {{Yes}}
| This is a LTE/EVDO/CDMA/HSPA/UMTS/EDGE/GPRS Wifi Hotspot device; Device is registered as a USB Ethernet device when connected through USB tethered (as opposed to Wifi) connection. USB ID 1410:b008
|-
| LOGILINK UA0174A
| 10/100
| Not required
| Standard-A
| USB 2.0
| about 300mA
| Standard-A port
| {{Yes}}
| This is a combined USB 2.0 3Port Hub and USB to Ethernet adapter. ID 0b95:772b ASIX Electronics Corp. AX88772C [http://www.reichelt.de/Netzwerkkarten/LOGILINK-UA0174A/3//index.html?ACTION=3&GROUPID=5822&ARTICLE=132333&SEARCH=usb%20ethernet&OFFSET=16&WKID=0&]
|}

== USB to serial adapters ==
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| pl203
| usbserial
| Standard-A
| USB 1.1
| 100mA. A powered hub is needed.
| Standard-A port
| {{Yes}}
| A powered hub is needed. Plug the device, then load USB modules. ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port.
|-
| SparkFun FTDI Basic Breakout
| not required
| Mini-B female
| USB 1.1
| <100mA
| OTG port
| {{Yes}}
| Tested the variant sold by eBay seller "goodlucksell".
|}

== USB WiFi adapters ==

The Pandora stock kernel may not come with all wireless driver support outside of the internal WiFi chip. Sometimes, the only way you'll get wireless working is to build your own kernel with it included or try [http://wireless.kernel.org/en/users/Download compat-wireless].

As for hofix 6a4 compat-wireless seems to be present in the kernel out of the box, so one can build a USB wireless driver for Pandora following this [http://boards.openpandora.org/index.php?/topic/5140-solvedbuilding-a-usb-wifi-driver/page__view__findpost__p__89280 algorithm]

As for [[hotfix 6]] Release Candidate the kernel includes drivers for these Realtek chips: RTL8712/8188/8191/8192SU/8192CU

See also [http://boards.openpandora.org/index.php?/topic/7160-micro-wifi-dongle/ this thread] on the forums for the latest.

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Tested on Pandora
! Additional comments
|-
| Advance Mini Wireless N150
| rtl8192cu
| Standard-A
| USB 2.0
| 500mA
| USB A
| {{Yes|Yes}}
| There's a little hole on it, so it's useful for attaching it to the OP.
|-
| ASUS WL-167G v2
| rt73usb + rt2x00usb + rt2x00lib
| Standard-A
| USB 2.0
| 300mA
| USB A
| {{Yes|Works under Slackware, not (without a hub) under Zaxxon, which become very unstable}}
| 0b05:1723 ASUSTek Computer, Inc. WL-167G v2 802.11g Adapter [Ralink RT73]. Works pretty fine on Linux PC.
|-
| Belkin N1 Wireless USB Adapter (F5D8051) ("Ver. 2053") (MARVELL v1021)
| N/A
| Standard-A
| USB 2.0
| {{Unknown}}
| No connection was attempted.
| {{No|No native driver support and ndiswrapper obviously won't work.}}
| There's a previous revision of this dongle which is supposed to have a Ralink chip, but they revised it and put a different chip inside. Reported (by whom?) to work with ndiswrapper and works in Linux.
|-
| Belkin Surf micro
| rtl8192cu
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Cisco/Linksys AE1000 High Performance Wireless-N USB Adapter
| rt3572sta (RT3572USB)
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A (Standard-A port?)
| {{Yes|Works with a modified driver.}}
| (Compiled module for pandora:[http://boards.openpandora.org/index.php?/topic/1992-linksys-ae1000-usb-wifi/ pandora forum]) Download the driver from [http://www.ralinktech.com/support.php?s=2 ralink's driver site], edit ./common/rtusb_dev_id.c, before "#endif // RT2870" add "{USB_DEVICE(0x13B1,0x002F)},", compile.' Reported (by whom?) to work in Linux.
|-
| D-Link WIRELESS G USB ADAPTER DWL-G122 rev.E1 F/W 5.00
| rt2870sta + rt2800usb + rt2800lib
| Standard-A
| USB 2.0
| 450mA
| USB A
| {{Yes|Works under Slackware, not (without a hub) under Zaxxon, which become very unstable}}
| 07d1:3c0f D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.E) [Ralink RT2870]. Works pretty fine on Linux PC.
|-
| Digitus Wireless 150N USB 2.0 Adapter
| rtl8192cu
| Standard-A
| USB 2.0
| 500mA
| USB A
| {{Yes|Yes}}
| Bundled with a non-WiFi Pandora coming from Craig's shop
|-
| Edimax EW-7811Un
| rtl8192cus
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Havit HV-WF15
| n/a
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since SuperZaxxon}}
|-
| Netgear WNA1000M
| rtl8192cu
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Thomson WLG-1500A
| ?
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{No|Doesn't work.}}
| 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter
|-
| TRENDnet TEW-424UB V2
| ?
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{No|lsusb shows it, but no module is loaded}}
| 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter. Same behavior on a PC.
|-
| Alfa Network AWUS036H 1000mw
| RTL8187
| IEEE 802.11b/g
| USB 2.0
| ?
| USB A
| {{Yes|Yes}}
| can be found on ebay; tested with Beta 3
|-
| TP-Link 150Mbps Mini Wireless N
| rtl8192cu
| Standard-A
| USB 2.0
| Unknown
| USB A
| {{Yes|Yes}}
| Model No TL-WN723N. Tested with WPA2. Works out of the box. Cheap to buy (£6.99 from pcworld in the UK).
|-
| TP-Link 150Mbps '''Nano''' Wireless N
| rtl8192cu
| Standard-A
| USB 2.0
| Unknown
| USB A
| {{Yes|Yes}}
| Model No TL-WN725N. Works out of the box. From Reichelt.de. Claims to be RaspberryPi compatible on their website.
|-
| TP-Link Atheros AR9170
| carl9170-1.fw
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{Yes|Yes}}
| Model No TL-WN821N. Works out of the box. ID 0cf3:1002
|-
|}

== DVB/TNT/TDT ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Module(s)
! Firmware
! Additional comments
|-
| AVerMedia AVerTV Volar Green HD
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| Should work
| af9033 tda18218
| dvb-usb-af9035-02.fw
| ID 07ca:a835 AVerMedia Technologies, Inc.
HD/PRO (A835)
|-
| AVerMedia AVerTV Volar Video Capture
| Standard-A
| USB 2.0
| Reported as 0mA. More likely to be 500mA
| Standard-A port
| ?
| ?
| ?
| ID 07ca:4830 AVerMedia Technologies, Inc.
H830
|-
| Hauppauge WinTV aero
| Standard-A
| USB 2.0
| 100mA
| Standard-A port
| {{Yes|Yes}}
| smsmdtv
| sms1xxx-hcw-55xxx-dvbt-02.fw
| ID 2040:b900 Hauppauge . Also works on the mini-usb port.
|-
| Hauppauge WinTV-HVR 930C
| Standard-A
| USB 2.0
| 150mA
| Standard-A port
| {{No}}
| em28xx xc5000
| dvb-usb-hauppauge-hvr930c-drxk.fw dvb-fe-xc5000-1.6.114.fw
| ID 2040:1605 Hauppauge . Not able to get it to work yet. Embedded Remote control ID: 0525:a4aa
|-
| MSI Digi Vox Min
| Standard-A
| USB 2.0
| ?
| Standard-A port
| {{Yes|Yes}}
| ?
| ?
| Realtek rtl2832u chipset
|-
|}

= Storage =

== External Hard Disk Drives ==
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! style="min-width: 120px" | Works on Pandora
! Additional comments
|-
| Freecom 250GB 2.5" portable
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Inside it's a Samsung Model HM251JX. {{HideableNotes|So I guess anything based on that will also work OK.}}
|-
| (Intenso)® 2.5" MEMORYSTATION 1TB
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
|
|-
| LaCie Rikiki 250GB USB 2.0 2.5" Hard Drive
| Not required
| standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port via powered High Speed Hub
| {{Partial|Not when unpowered, needs testing with a powered hub}}
| Not only does it fail to spin up, but it causes the Pandora's screen to pulsate wildly, much like an old CRT would if you placed a speaker or a magnet near to it. Not tested with a powered hub.
|-
| Seagate Seagate® Expansion™ External Drives
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{No}}
| Tested by [http://www.gp32x.com/board/index.php?/user/14781-hitnrun/ Hitnrun]. "Isn't even detected in lsusb (drive powered by external power source)"
|-
| Verbatim 250GB Model #47580 Hard Drive
| Not required
| Direct
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__877512 almatuk]. {{HideableNotes|"Watched videos directly from it at full speed, no need for powered USB hub. Had issues playing roms directly off it however as it was formatted NTFS. I'm sure if I formatted to FAT32 these would disappear."}}
|-
| Western Digital 160GB Elements External USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| standard-A port via powered High Speed Hub
| {{Yes}}
|
|-
| Western Digital 250GB Elements Portable USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct or standard-A port via High Speed Hub
| {{Yes}}
|
|-
| Western Digital 250GB My Passport Essential USB 2.0 2.5" Hard Drive
| Not required
| {{Unknown|Direct?}}
| USB 2.0
| {{Unknown}}
| {{Unknown|Direct?}}
| {{Partial|Maybe}}
| Tested by TheDarkSpectrum48K. The first time it [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__877386 "works perfectly!"]. The second time [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__882635 it didn't work].
|-
| Western Digital 400GB My Passport Essential USB 2.0 2.5" HDD model WDME4000TE
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://www.gp32x.com/board/index.php?/user/14534-peca/ Peca].
|-
| Western Digital 500GB Elements Portable External Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [[User:Esn|Esn]]. {{HideableNotes|The USB cable that came with it was bad, so I used another one.[http://www.gp32x.com/board/index.php?/topic/59494-solved-how-do-i-get-my-wd-500gb-external-hard-drive-to-work-properly/page__view__findpost__p__949863]}}
|-
| Western Digital 500GB My Passport Essential External Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [[User:Esn|Esn]]. Works fine. {{HideableNotes|Came pre-formatted in NTFS, but should work if you downloaded the community codec pack. It said 1TB on the packaging, but there was 465GB free space, so I'm pretty sure it was actually the 500GB one.}}[http://www.gp32x.com/board/index.php?/topic/59494-solved-how-do-i-get-my-wd-500gb-external-hard-drive-to-work-properly/page__view__findpost__p__949645]
|-
| Western Digital 1TB My Passport Essential SE External USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct or through powered High Speed Hub
| {{Yes}}
| Tested by [http://http://www.gp32x.com/board/index.php?/user/19191-mycohl/ Mycohl]. {{HideableNotes|Externally powered hub recommended to conserve battery power.}}
|-
| Western Digital Elements 2TB 3.5" Hard Drive Model:WDBAAU0020HBK
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://boards.openpandora.org/index.php?/user/430-kilowatt/ kilowatt].
|}

== DVD/CD Drives ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Lite-On EZ-DUB DVD/CD Multi-Recorder (Model eZAU120)
| Not required
| Standard-A
| USB 2.0
| Powered by included mains adapter - DC 12V 1.8A
| Standard-A port
| {{No}}
| Works in Linux.
|-
| Memorex 20x Multi Format DVD Recorder External - DVD±RW (±R DL)
| Not required
| Standard-A
| USB 2.0
| Powered by included mains adapter
| Standard-A port
| {{Yes}}
|
|}

= Video display device =

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Output connectors
! Works on Pandora
! Additional comments
|-
| Tritton see2 usb 2.0 to SVGA adapter
| sisusb
| USB
| USB 2.0
| {{Unknown|High {{HideableNotes|Reduces Pandora's battery life in half (10h → 4h)}}}}
| VGA (D-SUB)
| {{Partial|Yes, but has performance issues.}}
| Needs to be integrated with preferences. {{HideableNotes|Currently I (who?) must edit xorg.conf and mess with xinerama.}} Good for presentations, dragging a window is bearable, but hi-res video is slow. Works in Linux without any issues.
|-
| DisplayLink usb 2.0 to SVGA adapter WS Tech USB-DVI
| udlfb
| USB
| USB 2.0
| 500mA
| VGA (D-SUB)
| Yes
| 17e9:0198 DisplayLink. No hub needed. Module and userspace here:
git clone http://git.plugable.com/webdav/udlfb/
git clone http://git.plugable.com/webdav/xf-video-udlfb/
|-
| Plugable DisplayLink UGA-165
| ?
| Mini-B female
| USB 2.0
| ?
| DVI/VGA/HDMI
| {{Yes}}
| In /etc/X11, copy xorg.conf.DisplayLink to xorg.conf then '''log out''' with the device attached [http://pandoralive.info/?p=3423]
|-
| Magic Control Technology Corp. Trigger II External Graphics
| sisusb
| USB
| USB 2.0
| 500mA
| ?
| ?
| ID 0711:5200 Magic Control Technology Corp. A kernel recompile is needed. In /usr/src/linux/drivers/usb/misc/sisusbvga , edit sisusb.c , and add

{ USB_DEVICE(0x0711, 0x5200) },

in the list around line 3250
Get the latest xf86-video-sisusb driver here:
http://xorg.freedesk...ividual/driver/

|}

= Video capture devices =

== Webcams ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Exoo No Driver/USB 2.0 Webcam (Model No.: M053)
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{No}}
| Bought from [http://www.dealextreme.com/details.dx/sku.14991 DealExtreme]. Works in Linux.
|-
| Logitech Quickcam Communicate Deluxe
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{No}}
| USB ID: 046d:0992, works though [http://linux-uvc.berlios.de/ uvcvideo]. Works in Linux.
|-
| Logitech Webcam c210
| Not required
| Standard-A
| USB 2.0
| 170mA
| Standard-A port
| {{Yes}}
| ID 046d:0819 <unnamed>. Video and Audio recognized, tested to work.
|-
| Logitech HD Webcam C270 720p
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Partial|Yes, but audio untested}}
| ID 046d:0825 Logitech, Inc. Audio recognized, but not tested. More info to come. Works in Linux.
|-
| Logitech HD Webcam Pro 9000
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Partial|Yes, but audio untested}}
| ID 046d:0990 Logitech, Inc. Audio recognized, but not tested. Great Picture! Works in Linux.
|}

= Audio devices =

== Microphones/recorders ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| [http://www.bluemic.com/yeti/] Blue Yeti
| not required
| standard-A
| unknown
| unknown
| standard-A port via High Speed USB hub
| {{unknown|Not thoroughly tested.}}
| Very roughly tested 2012-06-13 by [[user:spiralofhope|spiralofhope]] using Mumble. More testing required. {{HideableNotes|The system recognizes the Yeti, and it appears in Mumble's list of available devices, but the audio wizard doesn't show the Yeti as having input. Additional troubleshooting is required, as is checking the manual/company website for missing information.}}
|-
| [http://www.zoom.co.jp/english/products/h2/] Zoom H2 Handy Recorder
| not required
| standard-A
| USB 1.1
| 300mA
| standard-A port via High Speed USB hub
| {{Yes|Yes, needs a USB hub.}}
| Can record into Audacity, but won't be recognized unless connected through USB hub.[http://www.gp32x.com/board/index.php?/topic/59301-audacity-1-3-12/page__view__findpost__p__947602].
|}

== MIDI controllers ==

EvilDragon bundled the usb MIDI class drivers in the default firmware image, therefore ANY class-compliant MIDI device should work with the Pandora, out of the box.[http://www.gp32x.com/board/index.php?/topic/58523-zynaddsubfx/page__view__findpost__p__938432]

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Akai LKP25
| Not required
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/58523-zynaddsubfx/page__view__findpost__p__938432]}}
|
|-
| M-Audio MIDISPORT 2x2 Anniv
| Not required
| {{Unknown}}
| {{Unknown}}
| 400mA
| {{Unknown}}
| {{Unknown}}
| ID 0763:1050 Midiman. High current draw!
|-
|}

== USB audio controllers ==

Some are "professional soundcard"; see [http://en.wikipedia.org/wiki/Sound_card#Professional_soundcards_.28audio_interfaces.29 definition on Wikipedia].

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Cakewalk UA-1G
| not required
| Standard-A
| USB 2.0
| 200mA
| Standard-A port
| {{Yes}}
| ID 0582:00e9 Roland Corp. This device may be similar to older Edirol/Roland USB audio devices. Runs and record under Slackware. Jack audio server realtime recording works. Recognized but not tested under official OS. A hub, powered or not, is needed.
|-
| Connectland AUDIO ADAPTER
| not required
| Standard-A
| USB 2.0
| 100mA
| Standard-A port
| {{Yes}}
| ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter . CMedia CM108 Virtual 7.1 Channel Sound. Has vol +, vol -, mute headspeaker, mute mic buttons. Mini-jack audio in and out. A non-powered hub is needed.
|}

= Input devices =

Any HID ([http://en.wikipedia.org/wiki/Human_interface_device Human Interface Device]) compliant keyboard, mouse or game controller should work on the Pandora. Most of those device are low speed or full speed USB device and will need to be connected though either a [[USB_reference#OTG host mode|USB OTG adapter/cable]] or a [[USB reference#What’s all this stuff about USB 1.1 and USB 2.0? Isn’t USB, uh, universal?|USB2 hub]] in order to work on the Pandora.

== External Game Controllers ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| 2-TECH SNES-to-USB adapter
| Not required
| Standard-A
| Low speed
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| USB description is "HuiJia USB GamePad", <tt>lsusb</tt> calls it "0e8f:3013 GreenAsia Inc."
|-
| USB Super RetroPort (SNES-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Bought from [http://www.retrousb.com/product_info.php?cPath=21&products_id=29 RetroZone]. Works in Linux.
|-
| USB RetroPort (NES-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Bought from [http://www.retrousb.com/product_info.php?cPath=21&products_id=28 RetroZone]. Works in Linux.
|-
| Trio Linker Plus II (PlayStation,-GameCube,-and-Dreamcast-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Bought from [http://www.play-asia.com/paOS-13-71-6m-49-en-70-1zfv.html Play-Asia]. Works in Linux.
|-
| NAZAR V47 USB Force Feedback Vibrating Gamepad Controller for PC
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Whether it really contains the claimed force feedback feature is unknown as this feature does not work under Linux - bought from [http://www.dealextreme.com/details.dx/sku.24551 DealExtreme]. Works in Linux.
|-
| 10-Fire-Button Double Vibration Feedback USB PC Arcade Joystick
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Whether it really contains the claimed force feedback feature is unknown as this feature does not work under Linux - bought from [http://www.dealextreme.com/details.dx/sku.27821 DealExtreme]. Works in Linux.
|-
| Official PlayStation 3 controller
| Not required
| Standard-A
| Full speed
| {{Unknown}}
| USB A To Mini B Cable via High Speed Hub
| {{unknown}}
| This is for USB not bluetooth compatibility. Sixaxis and DualShock not tested. Works in Linux.
|-
| Saitek PLC Cyborg Force Rumble Pad (P2500) - 06a3:ff0c
| {{unknown}}
| Standard-A
| {{unknown}}
| 5V
| Standard-A port via High Speed Hub
| {{Unknown|Not fully tested}}
| Partial test attempted 2012-06-24 by [[user:spiralofhope|spiralofhope]]. lsusb lists it. More testing required. {{HideableNotes|A gamepad testing procedure needs to be defined. See [[Joystick testing]].}}
|-
| Thrustmaster Firestorm Digital 3 Gamepad
| Not required
| Standard-A
| Low speed
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| ID 07b5:0213 Mega World International, Ltd Thrustmaster Firestorm Digital 3 Gamepad.
|-
| Wired Xbox 360 Controller
| xpad module
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| This also includes gamepads for PC that needs the Windows Xinput driver. Such gamepads include the Logitech Chillstream. Works in Linux.
|-
| WiseGroup.,Ltd SmartJoy Dual PLUS Adapter (dual PSX to USB joypad adapter)
| Not required
| Standard-A
| USB 1
| 100mA
| Standard-A port via USB 1-compatible High Speed Hub
| {{Yes}}
| ID 6677:8802. Works in Linux.
|-
| Logitech Cordless RumblePad 2
| Not required
| Standard-A
| Low speed
| 100mA
| Standard-A port via High Speed Hub
| {{Yes}}
| Product-ID: 0xc219, Vendor-ID: 0x046d (Logitech Inc.), [http://www.logitech.com/support/287 Official product support website],<br>All buttons worked fine in PCSX, analog sticks not tested, but likely work"
|-
|}

== Touchpads ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| [http://www.logitech.com/en-us/mice-pointers/mice/devices/8417 Logitech Wireless Touchpad]
| Not required
| Standard-A
| {{Unknown}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| Left and right four-finger swipes aren't mapped to anything by default in XFCE. They can be mapped as keyboard shortcuts.
|}

== Graphics tablets ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Works on Pandora
! Additional comments
|-
| Bamboo Multitouch
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{No|No [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__881806]}}
| It's not known if this works in Linux.
|-
| Genius Tablet
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Yes|Yes, [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__883140 via USB hub]}}
| It's not known if this works in Linux.
|-
| Wacom CTH-460
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{No|No [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__924422]}}
| Would need a patched driver to work. It's not known if this works in Linux.
|-
| Wacom Volito2 Tablet (Model: CTF-420)
| Not required
| Standard-A
| Low speed
| 40mA [http://www.my-volito.com/volito/specs.asp?lang=en]
| {{No}}
| USB ID: 056a:0062
|}

== Mice ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Connector
! Works on Pandora
! Additional comments
|-
| Apple Mouse (M5769)
| USB
| {{No}}
| Seems to disable USB port, reboot afterwards required
|-
| Apple Mouse with Scroll Ball (A1152)
| USB
| {{Yes|Yes, needs a USB hub.}}
|
|-
| Cherry Ghostcord [http://www.amazon.de/Cherry-M85-26005DE-2-B-Unlimited-Home-Rechargeable/dp/B001EDSE0U/ref=tag_stp_s2_edpp_url]
| USB
| {{Yes|Yes, needs a USB hub.}}
| Part of a bundle with keyboard and a USB dongle for the connetion. With the dongle on the hub both devices work just fine (tested in XFCE)
|}

= Electronics development =
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Microchip PICkit 2
| not required
| Mini-B female
| USB 1.1
| <100mA
| OTG port
| {{Yes}}
| The pk2cmd application compiles easily.
|-
| Arduino Uno
| not required
| Standard-B female
| USB 1.1
| 50mA
| OTG port
| {{Yes}}
|
|-
| Arduino Leonardo
| not required
| Micro-B female
| USB 1.1
| 50mA
| Standard-A port with hub
| {{Yes}}
| Connecting directly to the OTG port does not work.
|}

= Connectors, adapters, and hubs =

This section is intended as a general guide. Items in this section are standard USB accessories, so drivers are not required. Compatibility with Pandora is assumed. Please note that any external product links are provided for reference only, and are not an endorsement.

== OTG (On The Go) Adapters ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Works on Pandora
! Additional comments
|-
| Generic adapter
| {{No}}
| [http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=usb+otg+host+cable&_sacat=See-All-Categories Find on eBay] [http://www.amazon.co.uk/s/ref=nb_ss_ce?url=search-alias%3Delectronics&field-keywords=OTG+Cable+Adapter&x=3&y=23 Find on Amazon] These links are not 100% accurate. Check for `mini-a`, and on eBay, the price is higher by about $8.
|-
|Hama 00074214
| {{Yes}}
|[http://www.hama.de/00074214/hama-mini-usb-adapter-mini-usb-a-plug-usb-a-socket-015-m Manufacturer Page]
|-
| Nokia USB OTG adapter
| {{Yes}}
| [http://www.electronicproductonline.com/catalog/product_info.php?cPath=35_67&products_id=2043 Electronic Product Online]
|}

== Compact USB Hubs ==

Be sure to enable USB-host!

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Works on Pandora
! Additional comments
|-
| Griffin SmartShare USB [http://www.griffintechnology.com/products/smartshare-usb]
| {{No}}
|
|-
| Belkin F5U415 4 Port USB 2.0 Swivel Hub [http://catalog.belkin.com/IWCatProductPage.process?Product_Id=377085]
| {{No}}
| Comes with an optional power adapter.
|-
| Belkin F5U700 USB 2.0 7-Port Lighted Hub [http://www.belkin.com/uk/support/article/?lid=enu&pid=F5U700ea&aid=10289&scid=947]
| {{Yes}}
| Tested 2012-06-16 by [[user:spiralofhope|spiralofhope]] both with and without its power adapter.
|-
| Belkin F5U701 USB 2.0 7 Port Mobile Hub [http://www.belkin.com/IWCatProductPage.process?Product_Id=369788]
| {{Yes}}
| Tested by pabloh. Comes with an optional power adapter.
|-
| ID 0e8f:0016 GreenAsia Inc.
| {{No}}
| Tested by tsh. Labeled as high speed. Bought from ebay.
|-
| ID 05e3:0608 Targus with Genesys Logic 4 Port USB 2.0 Hub
| {{Yes}}
| Tested by Kazuki. Works.
|-
|Trust 4 port netbook hub ID 05e3:0608
| {{Yes}}
| Tested by tsh. Bought from [http://www.amazon.co.uk/gp/product/B0025X16AS Amazon].
|-
| High Speed 4 Port Mini USB 2.0 Hub for Laptop PC (non powered)
| {{Yes}}
| Octopus-style small cheap unpowered USB hub. Bought from [http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&item=270538502843 ebay]
|-
| Keeptech USB 2.0 Hub (7 Ports) with Power Adapter, KT-UH703 [http://www.keeptech.com/books_show.php?id=144]
| {{Yes}}
| Tested by [[User:Esn|Esn]]. Works powered or unpowered.
|-
| Logitech Premium 4-Port USB Hub [http://www.logitech.com/en-in/notebook-products/usb-hubs/devices/3048]
| {{Yes}}
|
|-
| LUPO 7-port USB 2.0 Hub (cheap octopus type which can be powered as there is dc socket)
| {{Partial|Yes. {{HideableNotes|Can use a power supply but wasn't tested with one.}}}}
| Tested by kilowatt. Bought from [http://www.amazon.co.uk/gp/product/B003BVDABG/ref=oss_product from amazon uk]
|-
| LogiLink USB 2.0 Hub 4-Port UA0086 [http://www.logilink.eu/showproduct/UA0086.htm]
| {{Yes}}
| Tested by Jones. Comes with an optional power adapter.
|-
| Logitec USB 2.0 LAN-TX/U2H3S Ethernet adapter + 3 USB ports [http://www.logitec.co.jp/products/lan/lantxu2h3/index.php]
| {{Yes}}
| See [http://pandorawiki.org/USB_compatibility_list#USB_to_Ethernet_adapters USB to ethernet adapters] for more details. USB 1 devices work perfectly. Also available as other brands: [http://www.amazon.com/USB-2-0-3-Port-Ethernet-Adapter/dp/B002OFJRW6/ref=sr_1_3?ie=UTF8&qid=1357779881&sr=8-3&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Encore-ENUET-3USB-3-Port-Ethernet-Adapter/dp/B0036FZJX4/ref=sr_1_1?ie=UTF8&qid=1357779881&sr=8-1&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Addlogix-3-port-USB-Hub-Ethernet/dp/B0030DO7OY/ref=sr_1_27?ie=UTF8&qid=1357780088&sr=8-27&keywords=USB+ethernet+with+3+port+USB+hub]
|-
| Rosewill RHB-220 4-port USB 2.0 Hub
| {{Yes}}
| Tested by Tyrant1919. Unpowered. Bought from [http://www.newegg.com/Product/Product.aspx?Item=N82E16817182168 Newegg].
|-
| i-rocks SLEEK HUB USB 2.0 4 Ports Hub [http://www.i-rocks.com/Product_detail.aspx?CLASS_ID=1036&PRODUCT_ID=1080]
| {{Yes}}
| Comes with an ac adapter, but can be used without. USB 1 devices work perfectly.
|-
| MSI StarHub201
| {{Yes}}
| Testet by mclien with keyboard and mouse in XFCE, unpowered, not on the MSI site (discontinnued, guess) [http://alatest.dk/anmeldelser/hubs-og-switches/msi-star-hub-201/po3-34222999,42/]
|}

[[Category:USB]]
[[Category:List]]

SD compatibility list

2013-12-18T22:10:40Z

A2000: Added Sandisk Extreme 128GB

[[File:Lead_Photo_For_SD_compatibility_list0-23919764984901237.png|thumbnail|SD card]]

This is a compatibility list for SD, SDHC and SDXC cards. The cards listed in '''green''' work with any file system. The cards listed in '''yellow''' work well only with one file system (this still means they can be used on the Pandora). The cards listed in '''red''' do not work well with any file system. Although it is not covered on this list, the Pandora can also read NTFS-formatted SD cards if the [http://www.open-pandora.org/downloads/CodecPack.pnd Community Codec Pack] is installed.

Note: always measure read speed by opening a terminal window and typing this command:
* the first inserted SD Card: '''dd if=/dev/mmcblk0 of=/dev/null bs=4MiB count=100'''
* the second inserted SD Card: '''dd if=/dev/mmcblk1 of=/dev/null bs=4MiB count=100'''

Note: The first inserted SD Card will always be /dev/mmcblk0, regardless if you put it into the second or first SD Card slot, whereas the second will be /dev/mmcblk1

If you can afford '''''destroying''''' all your data, you can test write speed. But be careful, you will need to create a new partition table, afterwards! You can use [http://www.gp32x.com/board/index.php?/topic/56915-gparted/ Gparted] to make new partition table.
* the first inserted SD Card: # '''dd if=/dev/zero of=/dev/mmcblk0 bs=4MiB count=100'''
* the second inserted SD Card: # '''dd if=/dev/zero of=/dev/mmcblk1 bs=4MiB count=100'''

By default, the first partition starts at block 8192 (4096KB) for 32GB cards, and block 32768 (16384KB) for 64GB cards. 64GB cards may need to be [[formatting SD cards|reformatted]] before use.

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Card size in GB
! Card class
! Full name
! URL
! fat32 is working?
! ext2/3/4 are working?
! read speed MB/sec
! write speed MB/sec
! actual capacity (1024byte blocks)
! Notes
|-
| 32
| 10
| Centon 32GB Class 10 SDHC
| [http://www.microcenter.com/single_product_results.phtml?product_id=0335228]
| yes
| ?
| 17.3
| 23.9
| ?
| ok {{HideableNotes|so far, first few hours of use}}
|- style="background: #90Ff90"
| 1
| n/a
| Kingston 1GB (blue)
| [http://www.newegg.com/Product/Product.aspx?Item=N82E16820160032]
| yes
| yes
| 12.5
| ?
| 1006080
| ok
|-
| 8
| 4
| Kingston 8GB Class 4 (black)
|
| not long-term tested yet
| not long-term tested yet
| 17.1
| 4.8
| ?
| From Craig's shop, so must be ok ;)
|- style="background: #FF9090"
| 16
| 4
| Kingston 16 GB Class 4 SDHC
| [http://www.amazon.com/Kingston-Class-Memory-SD4-16GB/dp/B0013AV9TW]
| no
| no
| 15
| 9.5
| 15663104
| {{HideableNotes|Bad controller chip, fails in the same manner as the 32GB card.}}
|- style="background: #FF9090"
| 32
| 4
| Kingston 32 GB Class 4 SDHC
| [http://www.amazon.com/Kingston-Class-Memory-SD4-32GB/dp/B001C9P5TO]
| no
| no
| 16
| 9.5
| 31539200
| {{HideableNotes|Defective flash controller randomly loses writes regardless of filesystem. When attempting to write, blocks sometimes get erased but not written.}}
|- style="background: #F3F781"
| 32
| 10
| Kingston 32GB (red) Class 10
| [http://www.newegg.com/Product/Product.aspx?Item=N82E16820139146]
| yes
| no
| 15.2
| ?
| ?
| {{HideableNotes|doesn't have badblocks, seems that "Flash Translation Layer" is not suitable for ext filesystems}}
|- style="background: #90FF90"
| 32
| 4
| Lexar Multi-Use 32GB
| [http://www.amazon.com/Lexar-Flash-memory-card-Class/dp/B0040J1ET8]
| yes
| yes
| 16.1
| 14.4
| 31267840
| {{HideableNotes|Much faster than would be expected for a class 4 card. Usual warning about high-speed cards being susceptible to power supply glitches applies.}}
|- style="background: #F3F781"
| 32
| 10
| Lexar Premium Series 32GB 100x
| [http://www.amazon.com/Lexar-Secure-Digital-Premium-Memory/dp/B003PJ657K/ref=sr_1_11?s=electronics&ie=UTF8&qid=1321986834&sr=1-11]
| yes
| no
| 16.7
| 12.0
| ?
| Worst ext2 support ever. Copying fine, a LOT of I/O errors at first boot. Literally unusable. Fat32 seems perfectly supported.
|- style="background: #90FF90"
| 64
| 10
| Lexar Professional 64GB 133x
| [http://www.amazon.com/Lexar-Professional-Flash-memory-Memory/dp/B004QWRZWY]
| yes
| yes
| 19.6
| 15.1
| 62536704
| {{HideableNotes|R/W speed in the pandora is limited to 16.1/11.3 MB/sec. High power consumption, may fail under load.}}[http://boards.openpandora.org/index.php?/topic/2556-32gb-sdhc-card-problems/page__st__40]
|- style="background: #90FF90"
| 128
| 10
| Lexar Professional 128GB 133x SDXC
| [http://www.bhphotovideo.com/c/product/756124-REG/Lexar_LSD128CRBNA133_128GB_Professional_SDXC_Card.html]
| yes
| yes
| 17.2
| 11.8
| 122.97GiB
| {{HideableNotes|Speeds listed are IN a Pandora.}}[http://boards.openpandora.org/index.php?/topic/7682-128gb-lexar-sdxc-card-benchmarks/]
|- style="background: #90FF90"
| 16
| 6
| Maxflash 16GB Class 6 SDHC
| [http://www.max-flash.eu/en/products/SDHC%20Card.html]
| ?
| yes
| 14.4
| ?
| 16186368
| Works fine
|- style="background: #90FF90"
| 8
| 6
| Panasonic SDHC 8GB (RP-SDQ08G)
| [http://www.letsgodigital.org/images/artikelen/38/panasonic-8gb-sdhc-card.jpg]
| yes
| ?
| 16.0-17.2
| 12.1-13.1
| 7778304
| seems to work fine. Ext yet untested.
|- style="background: #90FF90"
| 32
| 10
| Patriot LX 32GB SDHC Class 10 (PSF32GSDHC10)
| [http://www.bestdirect.ca/products/227442/Patriot/PSF32GSDHC10/] [http://www.amazon.ca/gp/product/B002TABU5I/]
| yes
| no/yes
| 18.1
| 12.6
| ?
| {{HideableNotes|Formatting EXT2 and then running fsck right after finds errors. Seems to work well with fat32 /// Entry 2 from another user: Works great with ext2. No errors or issues.}}
|- style="background: #90Ff90"
| 4
| 10
| Pretec 4GB, Class 10, 233x (white/green)
| [http://pamatove-karty.heureka.sk/pretec-sdhc-4gb-class-10/]
| yes
| yes (mostly)
| 14.0
| ?
| 3883008
| {{HideableNotes|I had very few fsck problems, and after several tries running fsck, they eventually got corrected. It looks very similar to that broken 32GB pretec. Except that this one almost works good.}}
|- style="background: #F3F781"
| 32
| 10
| Pretec 32GB Class 10, 233x (white/green)
| [http://www.prva.sk/detail/pretec-sdhc-32gb-class-10/kk296d49525.aspx]
| yes
| no
| 14.1
| 12.4
| ?
| {{HideableNotes|doesn't have badblocks, seems that "Flash Translation Layer" is not suitable for ext filesystems}}
|- style="background: #F3F781"
| 32
| 10
| PNY 32GB (P-SDHC32G10)
| [http://www.amazon.com/PNY-SDHC-Flash-Memory-P-SDH32G10-EFS2/dp/B004LQYV5E]
| yes
| ?
| 17.1
| ?
| ?
| {{HideableNotes|Works fine. EXT untested.}}
|- style="background: #90FF90"
| 16
| 6
| Samsung 16GB SDHC
| [http://www.amazon.de/Samsung-SDHC-Speicherkarte-Class-Retailverpackung/dp/B002USGZK4]
| yes
| ?
| ??
| ??
| ??
| seems to work fine. Ext yet untested.
|- style="background: #90FF90"
| 32
| 10
| Samsung 32GB MicroSDHC Class 10 (MB-MSBGA)
| [http://www.samsung.com/us/computer/memory-storage/MB-MSBGA/US]
| yes
| yes
| 18.1
| 11.7
| 30657536
| Works. {{HideableNotes|Claimed to be resistant to magnets, shocks, and seawater—as if you’d be able to find it in the ocean!}}
|- style="background: #90FF90"
| 16
| 6
| Sandisk Ultra SDHC 16 Gb 200x
| ?
| yes
| yes
| 19.4
| 10.8
| 15549952
| Works fine
|- style="background: #90FF90"
| 32
| 4
| SanDisk Ultra 32 GB Class 4 SDHC
| [http://www.sandisk.com/products/imaging/sandisk-ultra-sdhc]
| yes
| yes
| 16.4
| 7.1
| 31166976
| OK.
|- style="background: #90FF90"
| 64
| 4
| Sandisk 64GB SDXC Class 4
| [http://www.amazon.com/SanDisk-Secure-Digital-Capacity-Memory/dp/B003FVG3PC/]
| yes
| yes
| 16.1
| 4.5
| 62367744
| Works fine
|- style="background: #F3F781"
| 64
| 10
| SanDisk SDXC I 64GB Ultra 30MB/s Edition
| [http://www.amazon.com/gp/product/B007M51IZM/ref=sr_1_1?ie=UTF8&keywords=sandisk%20ultra%2064&qid=1355844714&sr=8-1]
| yes
| yes
| 17.5
| 9.4
| ?
| SDSDU-064G-U46 Have high doubts about this card after some real usage. Transferring lots of files and big ones leads to corruption, whatever the filesystem. Reminds me Transcend crappy cards.
|- style="background: #90FF90"
| 8
| 10
| SanDisk SDHC 8GB Extreme 30MB/s Edition
| [http://www.amazon.de/SanDisk-SDHC-Extreme-Speicherkarte-30MB/dp/B001G87S1Y/ref=sr_1_2?ie=UTF8&qid=1304020731&sr=8-2]
| yes
| yes
| 16.6
| ?
| ?
| Works nice. {{HideableNotes|Installed Angstrom on it and copied some stuff onto it. Angstrom runs as fast as from NAND. Best thing was, where I ordered it it said class 6, but it is actually 10. :-D Still have to test its speed and actual size. Didn't test Fat a lot, but it seemed to work.}}
|- style="background: #90FF90"
| 8
| 10 - UHS 1
| SanDisk Extreme HD Video SDHC UHS-I 8GB 30MB/s 200X
| [http://www.amazon.com/SanDisk-Extreme-Video-Memory-SDSDRX3-8192-A21/dp/B000XZCIX4/ref=sr_1_2?s=electronics&ie=UTF8&qid=1322082251&sr=1-2]
| yes
| yes
| 16.6
| 15
| ?
| Works.
|- style="background: #90FF90"
| 16
| 10 - UHS 1
| SanDisk Extreme HD Video SDHC UHS-I 16GB 30MB/s 200X
| [http://www.amazon.com/SanDisk-Extreme-Video-Memory-SDSDRX3-016G-A21/dp/B003D5MY5I/ref=sr_1_2?s=electronics&ie=UTF8&qid=1322074343&sr=1-2]
| yes
| yes
| 16.5
| 14.5
| ?
| Works.
|- style="background: #90FF90"
| 32
| 10 - UHS 1
| SanDisk Extreme SDHC UHS-I 32GB 45MB/s 300X
| [http://www.amazon.com/SanDisk-EXTREME-SDSDRX3-032G-A21-Newest-Version/dp/B0077SCBGE/ref=sr_1_13?s=electronics&ie=UTF8&qid=1330369724&sr=1-13]
| yes
| yes
| 17.0-18.6
| 13.0-23
| ?
| Works.
|- style="background: #90FF90"
| 128
| 10 - UHS 1
| SanDisk Extreme SDHC UHS-I 128GB 45MB/s 300X
| [http://ecx.images-amazon.com/images/I/41-jG988acL._SY355_.jpg]
| yes
| yes
| ?
| ?
| ?
| Works.
|- style="background: #90FF90"
| 8
| 10 - UHS 1
| SanDisk Extreme Pro SDHC UHS-I 8GB 45MB/s 300X
| [http://www.amazon.com/SanDisk-Carte-M%C3%A9moire-Extreme-UHS-I/dp/B004JJU6I4]
| yes
| yes
| 15.8
| 12.5
| ?
| Works.
|- style="background: #90FF90"
| 16
| 10 - UHS 1
| SanDisk Extreme Pro SDHC UHS-I 16GB 95MB/s 633X
|
| yes
| yes
| 18.9
| 17.4
| ?
| SDSDXPA-016G-X46 Read/write 20 and 19.1 on 1GHz unit.
|-
| 32
| 6
| TOPRAM 32GB CLASS 6 SDHC HIGH SPEED (TRSD32GSDHCR3)
| [http://www.buy.com/prod/topram-32gb-class-6-sdhc-high-speed-flash-memory-card-usb-2-0-sdhc/q/loc/101/210247368.html]
| ?
| ?
| ?
| ?
| ?
| Reported working [http://www.gp32x.com/board/index.php?/topic/55506-recommended-sd-cards-for-pandora/page__view__findpost__p__897478 here].
|- style="background: #90FF90"
| 8
| 10
| Toshiba SDHC 8GB (SH008GAA2BA)
| [http://www.gadgetshunter.com/image/cache/data/Memory/Toshiba%208GB%20Class%2010%20High%20Speed%20SDHC%20Memory%20Card-500x500.jpg]
| yes
| yes
|
|
|
| seems to work fine
|- style="background: #90FF90"
| 16
| 10
| Toshiba SDHC 16GB (SD-T16G)
| [http://www.toshiba-memory.com/img/rondell/SD-Class-10-16GB-large.jpg]
| yes
| yes
| 18.6
| 22.5
| 16117760
| seems to work fine
|-
| 32
| 4
| Toshiba SDHC 32GB (SD-K32G)
| [http://www.card-discount.de/images/produkte/i11/112.jpg]
| yes
| unknown
| 15.5
|
|
| still testing
|- style="background: #F3F781"
| 8
| 10
| Transcend 8GB SDHC Class 10
| [http://www.amazon.com/Transcend-Carte-m%C3%A9moire-SDHC-Class/dp/B002WE6D44]
| yes
| yes
| 13.3
| 10.1
| ?
| Have serious doubts about this card. May fail when transferring a lot of data. Seems it doesn't handle.
|- style="background: #FF9090"
| 32
| 10
| Transcend 32GB SDHC Class 10
| [http://www.amazon.co.uk/Transcend-Flash-memory-card-Class/dp/B003P3MCXW/ref=sr_1_1?ie=UTF8qid=1301320598sr=8-1]
| no
----
<div style="background: #F3F781">yes{{HideableNotes| working for me}}</div>
| no
----
<div style="background: #F3F781">yes{{HideableNotes| working fo me}}</div>
| 16.0
| ?
| ?
| Has serious issues [http://boards.openpandora.org/index.php?/topic/1592-sd-card-instability/]
----
<div style="background: #F3F781">Bad partitioning ?{{HideableNotes| working fo me}}</div>
|- style="background: #FF9090"
| 64
| 10
| Transcend SDXC Card 64GB ULTIMATE CLASS 10 (PN:TS64GSDXC10)
| [http://www.transcendusa.com/Products/ModDetail.asp?ModNo=286&LangNo=0&Func1No=1&Func2No=13]
| yes (needs more testing)

----
<div style="background: #F3F781">yes{{HideableNotes|but look at the notes, not good}}</div>
| no
----
<div style="background: #F3F781">?{{HideableNotes|Might work but didn't really test it long enough}}</div>
| 16.1
----
<div style="background: #F3F781"><=16</div>
| 16.1
----
<div style="background: #F3F781"><=16</div>
| ?
| {{HideableNotes|After some time the system gives read/write errors. Works fine on a pc with linux with ext2/ext3.}}
----
<div style="background: #F3F781">Serious issues. {{HideableNotes|My Linux computer can't read it, but that is probably the computer. First formatted it to ext2 while leaving 16MiB free at the beginning because it was like that when I got it. Had 16MB/s r/w. Then started to have problems after writing about 64GB to it, couldn't mount it, reformatted it, no change, reformatted it as Fat32, still no change, reformatted again as fat32, no problems so far but write speed is 0.5MB/s and read speed 14.76MB/s. I let F3 run over it, the speed was measured using it too. --A few weeks later-- It has got variable w/r speed, it drops after a few seconds of writing data to it. Sometimes it gives other errors, stops working until I reboot, etc. It's useable, but I wouldn't buy it again.}}</div>
|- style="background: #FF9090"
| 32
| 6
| Verbatim Class 6 Premium HD Video 32GB SDHC
| [http://www.amazon.co.uk/Verbatim-44032-32GB-Video-Class/dp/B0035MSOX0/ref=sr_1_2?ie=UTF8&s=electronics&qid=1304517332&sr=8-2]
| no
| no
| ?
| ?
| ?
| Behaviour similar to Kingston 32GB Class 4 -[http://www.gp32x.com/board/index.php?/topic/59113-pnd-run-sh/page__view__findpost__p__948196]
|- style="background: #90FF90"
| 32
| 4
| Zap Glider 32GB Class 4
| [http://www.teknikmagasinet.se/db.pl?tf=product.html&artnr=181043]
| ?
| yes
| 16.6
| 4.6
| ?
| Works fine
|}

[[Category:Hardware]]
[[Category:List]]
[[Category:Storage card]]

USB compatibility list

2013-09-09T23:50:12Z

A2000: /* USB WiFi adapters */

This is a list of USB devices that have been tested on the Pandora. If the device you want to know about isn't listed here, don't worry! Just go to [[USB_reference|the USB reference page]], look up the specs of your device, and you may be able to figure out if it's compatible.

= Troubleshooting =

Each type of device will have its own unique way to troubleshoot.

But here are some general tips:

* Is USB-Host enabled?
* check <tt>lsusb</tt>
* check <tt>dmesg</tt>

When asking for help on [http://boards.openpandora.org/index.php?/forum/8-support/ the forums support board], be sure to post both your <tt>lsusb</tt> and <tt>dmesg</tt>.

Because <tt>dmesg</tt> output is very long, you need to paste it within [spoiler] tags like this:

[spoiler]
(paste your dmesg in here)
[/spoiler]

An easy way to get your <tt>dmesg</tt> so you can easily copy and paste it, is:

dmesg|leafpad

<tt>leafpad</tt> will open with the output of <tt>dmesg</tt>.

If you have no networking on your palmtop, you can send the information to a text file like this:

cd (your storage card)
dmesg>textfile.txt
sync

Then you can remove your card (if no programs are using it or PNDs are running on it) and bring it to a card reader on your desktop.

= Networking =

Please see the [[Mobile broadband]] page for tips on how to get these working, as well as [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/ this tutorial] from the GP32X forum.

== HSDPA (3G) Modems ==

Please note that many (if not all) USB 3G modems need modemmanager to be installed for switching from mass storage mode to serial communications mode. When first plugged in, most 3G USB modems claim to be a mass storage device and offer, on its built-in flash, drivers and connectivity software to be installed. Mostly this is only for Windows and Mac, so for the Pandora this is not useful. modemmanager instantly takes care of toggling the mode, so that when you plug in the modem, after a few seconds or maybe half a minute modemmanager has switched the modem to communications mode and NetworkManager is able to use it.

If you are using a Firmware before HF7 (or one of its Alpha/Beta versions) you have to install modemmanager. To do so, connect your Pandora to the Internet, open a terminal and, as a super user, intall it via opkg by entering the commands:

:sudo opkg update
:sudo opkg install modemmanager

'''Note:''' If you are using a firmware more recent than "Zaxxon" Hotfix 6 (starting with HF7) you do not have to follow the steps outlined above since modemmanager comes preinstalled.

'''Note 2:''' After plugging in the USB 3G modem, it may take some time until NetworkManager is able to use the modem. Wait for at least half a minute, until you give up and report that the modem doesn't work.

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| ZTE K3565-Z / MF626 / MF627 / MF636
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__956513] [http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__pid__127881#entry127881]}}
| A how-to by shideneyu for this modem can be found [http://www.pandorawiki.org/ZTE_K3565Z_3G_USB_Modem here]
|-
|-
| BandLuxe C270
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| A how-to by relliker for this modem can be found [http://www.pandorawiki.org/BandLuxe_C270_3G_USB_Modem here]
|-
| Huawei E156G
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/52827-3gumts-usb-dongle/page__view__findpost__p__835681]}}
|
|-
| Huawei E160
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| As the entry for Huawei E220 was wrong, this Current draw could also be wrong. This one definitely needs modemmanager. After installing modemmanager, it works flawlessly.
|-
| Huawei E160E
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| As the entry for Huawei E220 was wrong, this Current draw could also be wrong.
|-
| Huawei E1750
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__939350]}}
|
|-
| [[wikipedia:Huawei E220|Huawei E220]]
| Not required
| Standard-A
| USB 1.1
| 500mA
| Standard-A port via High Speed hub
| {{No|Not on new kernels.}}
| The successful Pandora E220 tests were done by DJWillis on an old kernel (long before Pandora shipped). It seems that they are NOT working any more. Also tested on Linux (was it working?) This entry originally said 250mA, but there is no source and current sources say 500mA.
|-
| 4G-Systems XS Stick P14
| Not required (usbserial module)
| standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__937681]}}
| Requires usbmodeswitch program.
|-
| iPhone 3GS (Probably also 1G/3G)
| ipheth
| Standard-A
| USB 2.0
| 500mA
| {{Unknown|USB A (Standard-A port?)}}
| {{Maybe|Should work in Angstrom with some work.}}
| Requires a good bit of dependencies to get working. Tested with Debian from SD, but should work in Angstrom with some work. The ipheth wwan0 device only provides a connection over the 3G modem, even if you're connected to a wifi network. I used the iproxy and SSH tunneling method with proxychains to get to the wifi network.
|-
| HTC Desire
| not required
| Standard-A
| USB 2.0
| 500mA
| {{Unknown|USB A (Standard-A port?)}}
| {{Yes}}
| Requires internet connection sharing to be enabled from the phone.
|}

== USB to Ethernet adapters ==

To enable USB Ethernet adapters on the Pandora, you may need to left-click the networking icon on the panel in Xfce, and select "Ifupdown (bnep0)".

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Mbps
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Apple USB Ethernet Adapter MB442Z/A
|
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Reportedly uses an ASIX AX88xxx chipset.
|-
| Apple USB Ethernet Adapter model A1277
|
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 05ac:1402 Apple, Inc.
|-
| ASUS USB Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 200mA
| Standard-A port
| {{Yes}}
| ID 0b95:7e2b ASIX Electronics Corp. AX88772B
|-
| Conrad 3-Port-USB-Hub und Netzwerk-Adapter
|
| Not required
| Standard-A
| USB 2.0
| A lot! {{HideableNotes|50% of battery charge only brings you 2h40min (min brightness, no other devices attached)}}
| Standard-A port
| {{Yes}}
| Has a 3port USB Hub included. External power supply can (and should) be attached, not included though. ASIX Chipset. 20€ @ [http://www.conrad.de/ce/de/product/976406/NOTEBOOK-MINI-DOCKINGSTATION-USBRJ45/SHOP_AREA_32315&promotionareaSearchDetail=005 Conrad Electronics]. Not tested in Linux.
|-
| Logitec USB 2.0 LAN-GTJ/U2B Ethernet adapter
| 10/100/1000
| Not required
| Standard-A
| USB 2.0
| 450mA (lsusb) 1000Mbps=350mA 100Mbps=230mA 10Mbps=220mA(documentation)
| Standard-A port
| {{Yes}}
| ID 0b95:1780 ASIX Electronics Corp. AX88178 [http://www.logitec.co.jp/products/lan/langtju2b/index.php]
|-
| Logitec USB 2.0 LAN-TX/U2B Ethernet adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA (lsusb) 100Mbps=170mA 10Mbps=210mA (documentation)
| Standard-A port
| {{Yes}}
| ID 0b95:772a ASIX Electronics Corp.[http://www.logitec.co.jp/products/lan/lantxu2b/index.php]
|-
| Logitec USB 2.0 LAN-TX/U2H3S Ethernet adapter + 3 USB ports
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA (lsusb) 300mA (documentation)
| Standard-A port
| {{Yes}}
| ID 0b95:772a ASIX Electronics Corp. USB hub current: 100mA (lsusb) 200mA (documentation). [http://www.logitec.co.jp/products/lan/lantxu2h3/index.php] [http://www.amazon.com/USB-2-0-3-Port-Ethernet-Adapter/dp/B002OFJRW6/ref=sr_1_3?ie=UTF8&qid=1357779881&sr=8-3&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Encore-ENUET-3USB-3-Port-Ethernet-Adapter/dp/B0036FZJX4/ref=sr_1_1?ie=UTF8&qid=1357779881&sr=8-1&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Addlogix-3-port-USB-Hub-Ethernet/dp/B0030DO7OY/ref=sr_1_27?ie=UTF8&qid=1357780088&sr=8-27&keywords=USB+ethernet+with+3+port+USB+hub]
|-
| Wii USB 2.0 10/100M adapter (use [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=86;71;101 ASIX AX 88772 USB 2.0 chip])
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 0b95:7720 ASIX Electronics Corp. AX88772. [http://www.dealextreme.com/details.dx/sku.5926 This clone from DealExtreme] works too.
|-
| Connectland USB 2.0 10/100M Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 0b95:7720 ASIX Electronics Corp. AX88772 - Works fine, Sometimes a reboot is necessary (ZaxxonHF5RC1).
|-
| Belkin Gigabit USB 2.0 Network Adapter
| 10/100/1000
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| The shape of it make is a bit awkward to fit if you connect it directly, but it has a short adapter cable. I only get ~95Mbit on a gigabit network, but then the pandora's cpu maxes out. (it may be that the driver/usb stack isn't very well optimized), has horribly bright blue LEDs.
|-
| MosChip MCS7830 USB 10/100 Ethernet adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Yes}}
| ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter. Kernel module: mcs7830.
|-
| EU.MARK USB 10/100M RJ45 Ethernet Network Adapter Dongle
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| USB ID: 9710:7830 - bought from [http://www.dealextreme.com/details.dx/sku.22684 DealExtreme]
|-
| Digitus DN-10050 Fast Ethernet USB Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| MosChip MCS7830-based adapter. USB ID 9710:7830.
|-
| Edimax EU-4230 Fast Ethernet USB Adapter with 3-port USB hub [http://edimax.ie/images/Image/datasheet/USB/EU-4230/EU-4230_Datasheet.pdf]
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Ethernet USB ID 0b95:772a ASIX Electronics Corp. 3-port USB2.0 hub USB ID 0409:005a NEC Corp. Optional power adapter for USB hub.
|-
| Peabird USB v2.0 Fast Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Yes}}
| ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter. Consumes a lot of current. Fragile, the protective plastic cord cracked after one month. Hot. A blue light a bit too flashy. Definitely avoid this model.
|-
| SIIG JU-NE0012-S1 USB 2.0 Fast Ethernet Adapter
| 10/100
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Bought from [http://www.newegg.com/Product/Product.aspx?Item=N82E16812191163 Newegg]
|-
| TRENDnet USB to Gigabit Ethernet Adapter TU2-ETG
| 10/100/1000
| Not required
| Standard-A
| USB 2.0
| 450mA (lsusb) Dormant: 5mA Static: 91mA Working: 131mA (documentation)
| Standard-A port
| {{Yes}}
| Rev. 2.0R ID 0b95:1780 ASIX Electronics Corp. AX88178 [http://www.trendnet.com/products/proddetail.asp?prod=275_TU2-ETG&cat=42] Rev. 2.0R is white, previous versions are blue and consumes more current. The documentation's current draw are reported for 10 and 100Mbps.
|-
| Novatel Wireless Jetpack 4620L
|
| cdc_ether
| Standard-A
| USB
| High drain; 95% charge = 6:00 battery life.
| Standard-A port
| {{Yes}}
| This is a LTE/EVDO/CDMA/HSPA/UMTS/EDGE/GPRS Wifi Hotspot device; Device is registered as a USB Ethernet device when connected through USB tethered (as opposed to Wifi) connection. USB ID 1410:b008
|}

== USB to serial adapters ==
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| pl203
| usbserial
| Standard-A
| USB 1.1
| 100mA. A powered hub is needed.
| Standard-A port
| {{Yes}}
| A powered hub is needed. Plug the device, then load USB modules. ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port.
|}

== USB WiFi adapters ==

The Pandora stock kernel may not come with all wireless driver support outside of the internal WiFi chip. Sometimes, the only way you'll get wireless working is to build your own kernel with it included or try [http://wireless.kernel.org/en/users/Download compat-wireless].

As for hofix 6a4 compat-wireless seems to be present in the kernel out of the box, so one can build a USB wireless driver for Pandora following this [http://boards.openpandora.org/index.php?/topic/5140-solvedbuilding-a-usb-wifi-driver/page__view__findpost__p__89280 algorithm]

As for [[hotfix 6]] Release Candidate the kernel includes drivers for these Realtek chips: RTL8712/8188/8191/8192SU/8192CU

See also [http://boards.openpandora.org/index.php?/topic/7160-micro-wifi-dongle/ this thread] on the forums for the latest.

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Tested on Pandora
! Additional comments
|-
| Advance Mini Wireless N150
| rtl8192cu
| Standard-A
| USB 2.0
| 500mA
| USB A
| {{Yes|Yes}}
| There's a little hole on it, so it's useful for attaching it to the OP.
|-
| ASUS WL-167G v2
| rt73usb + rt2x00usb + rt2x00lib
| Standard-A
| USB 2.0
| 300mA
| USB A
| {{Yes|Works under Slackware, not (without a hub) under Zaxxon, which become very unstable}}
| 0b05:1723 ASUSTek Computer, Inc. WL-167G v2 802.11g Adapter [Ralink RT73]. Works pretty fine on Linux PC.
|-
| Belkin N1 Wireless USB Adapter (F5D8051) ("Ver. 2053") (MARVELL v1021)
| N/A
| Standard-A
| USB 2.0
| {{Unknown}}
| No connection was attempted.
| {{No|No native driver support and ndiswrapper obviously won't work.}}
| There's a previous revision of this dongle which is supposed to have a Ralink chip, but they revised it and put a different chip inside. Reported (by whom?) to work with ndiswrapper and works in Linux.
|-
| Belkin Surf micro
| rtl8192cu
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Cisco/Linksys AE1000 High Performance Wireless-N USB Adapter
| rt3572sta (RT3572USB)
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A (Standard-A port?)
| {{Yes|Works with a modified driver.}}
| (Compiled module for pandora:[http://boards.openpandora.org/index.php?/topic/1992-linksys-ae1000-usb-wifi/ pandora forum]) Download the driver from [http://www.ralinktech.com/support.php?s=2 ralink's driver site], edit ./common/rtusb_dev_id.c, before "#endif // RT2870" add "{USB_DEVICE(0x13B1,0x002F)},", compile.' Reported (by whom?) to work in Linux.
|-
| D-Link WIRELESS G USB ADAPTER DWL-G122 rev.E1 F/W 5.00
| rt2870sta + rt2800usb + rt2800lib
| Standard-A
| USB 2.0
| 450mA
| USB A
| {{Yes|Works under Slackware, not (without a hub) under Zaxxon, which become very unstable}}
| 07d1:3c0f D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.E) [Ralink RT2870]. Works pretty fine on Linux PC.
|-
| Digitus Wireless 150N USB 2.0 Adapter
| rtl8192cu
| Standard-A
| USB 2.0
| 500mA
| USB A
| {{Yes|Yes}}
| Bundled with a non-WiFi Pandora coming from Craig's shop
|-
| Edimax EW-7811Un
| rtl8192cus
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Havit HV-WF15
| n/a
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since SuperZaxxon}}
|-
| Netgear WNA1000M
| rtl8192cu
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Thomson WLG-1500A
| ?
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{No|Doesn't work.}}
| 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter
|-
| TRENDnet TEW-424UB V2
| ?
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{No|lsusb shows it, but no module is loaded}}
| 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter. Same behavior on a PC.
|-
| Alfa Network AWUS036H 1000mw
| RTL8187
| IEEE 802.11b/g
| USB 2.0
| ?
| USB A
| {{Yes|Yes}}
| can be found on ebay; tested with Beta 3
|-
| TP-Link 150Mbps Mini Wireless N
| rtl8192cu
| Standard-A
| USB 2.0
| Unknown
| USB A
| {{Yes|Yes}}
| Model No TL-WN723N. Tested with WPA2. Works out of the box. Cheap to buy (£6.99 from pcworld in the UK).
|-
| TP-Link 150Mbps '''Nano''' Wireless N
| rtl8192cu
| Standard-A
| USB 2.0
| Unknown
| USB A
| {{Yes|Yes}}
| Model No TL-WN725N. Works out of the box. From Reichelt.de. Claims to be RaspberryPi compatible on their website.
|-
|}

== DVB/TNT/TDT ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Module(s)
! Firmware
! Additional comments
|-
| AVerMedia AVerTV Volar Green HD
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| Should work
| af9033 tda18218
| dvb-usb-af9035-02.fw
| ID 07ca:a835 AVerMedia Technologies, Inc.
HD/PRO (A835)
|-
| AVerMedia AVerTV Volar Video Capture
| Standard-A
| USB 2.0
| Reported as 0mA. More likely to be 500mA
| Standard-A port
| ?
| ?
| ?
| ID 07ca:4830 AVerMedia Technologies, Inc.
H830
|-
| Hauppauge WinTV aero
| Standard-A
| USB 2.0
| 100mA
| Standard-A port
| {{Yes|Yes}}
| smsmdtv
| sms1xxx-hcw-55xxx-dvbt-02.fw
| ID 2040:b900 Hauppauge . Also works on the mini-usb port.
|-
| MSI Digi Vox Min
| Standard-A
| USB 2.0
| ?
| Standard-A port
| {{Yes|Yes}}
| ?
| ?
| Realtek rtl2832u chipset
|-
|}

= Storage =

== External Hard Disk Drives ==
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! style="min-width: 120px" | Works on Pandora
! Additional comments
|-
| Freecom 250GB 2.5" portable
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Inside it's a Samsung Model HM251JX. {{HideableNotes|So I guess anything based on that will also work OK.}}
|-
| (Intenso)® 2.5" MEMORYSTATION 1TB
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
|
|-
| LaCie Rikiki 250GB USB 2.0 2.5" Hard Drive
| Not required
| standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port via powered High Speed Hub
| {{Partial|Not when unpowered, needs testing with a powered hub}}
| Not only does it fail to spin up, but it causes the Pandora's screen to pulsate wildly, much like an old CRT would if you placed a speaker or a magnet near to it. Not tested with a powered hub.
|-
| Seagate Seagate® Expansion™ External Drives
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{No}}
| Tested by [http://www.gp32x.com/board/index.php?/user/14781-hitnrun/ Hitnrun]. "Isn't even detected in lsusb (drive powered by external power source)"
|-
| Verbatim 250GB Model #47580 Hard Drive
| Not required
| Direct
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__877512 almatuk]. {{HideableNotes|"Watched videos directly from it at full speed, no need for powered USB hub. Had issues playing roms directly off it however as it was formatted NTFS. I'm sure if I formatted to FAT32 these would disappear."}}
|-
| Western Digital 160GB Elements External USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| standard-A port via powered High Speed Hub
| {{Yes}}
|
|-
| Western Digital 250GB Elements Portable USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct or standard-A port via High Speed Hub
| {{Yes}}
|
|-
| Western Digital 250GB My Passport Essential USB 2.0 2.5" Hard Drive
| Not required
| {{Unknown|Direct?}}
| USB 2.0
| {{Unknown}}
| {{Unknown|Direct?}}
| {{Partial|Maybe}}
| Tested by TheDarkSpectrum48K. The first time it [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__877386 "works perfectly!"]. The second time [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__882635 it didn't work].
|-
| Western Digital 400GB My Passport Essential USB 2.0 2.5" HDD model WDME4000TE
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://www.gp32x.com/board/index.php?/user/14534-peca/ Peca].
|-
| Western Digital 500GB Elements Portable External Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [[User:Esn|Esn]]. {{HideableNotes|The USB cable that came with it was bad, so I used another one.[http://www.gp32x.com/board/index.php?/topic/59494-solved-how-do-i-get-my-wd-500gb-external-hard-drive-to-work-properly/page__view__findpost__p__949863]}}
|-
| Western Digital 500GB My Passport Essential External Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [[User:Esn|Esn]]. Works fine. {{HideableNotes|Came pre-formatted in NTFS, but should work if you downloaded the community codec pack. It said 1TB on the packaging, but there was 465GB free space, so I'm pretty sure it was actually the 500GB one.}}[http://www.gp32x.com/board/index.php?/topic/59494-solved-how-do-i-get-my-wd-500gb-external-hard-drive-to-work-properly/page__view__findpost__p__949645]
|-
| Western Digital 1TB My Passport Essential SE External USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct or through powered High Speed Hub
| {{Yes}}
| Tested by [http://http://www.gp32x.com/board/index.php?/user/19191-mycohl/ Mycohl]. {{HideableNotes|Externally powered hub recommended to conserve battery power.}}
|-
| Western Digital Elements 2TB 3.5" Hard Drive Model:WDBAAU0020HBK
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://boards.openpandora.org/index.php?/user/430-kilowatt/ kilowatt].
|}

== DVD/CD Drives ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Lite-On EZ-DUB DVD/CD Multi-Recorder (Model eZAU120)
| Not required
| Standard-A
| USB 2.0
| Powered by included mains adapter - DC 12V 1.8A
| Standard-A port
| {{No}}
| Works in Linux.
|-
| Memorex 20x Multi Format DVD Recorder External - DVD±RW (±R DL)
| Not required
| Standard-A
| USB 2.0
| Powered by included mains adapter
| Standard-A port
| {{Yes}}
|
|}

= Video display device =

== VGA DVI HDMI adapter ==

No devices have been tested yet

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Output connectors
! Works on Pandora
! Additional comments
|-
|
|
|
|
|
|
|
| No devices have been tested yet
|}

==== External graphics cards ====

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Output connectors
! Works on Pandora
! Additional comments
|-
| Tritton see2 usb 2.0 to SVGA adapter
| sisusb
| USB
| USB 2.0
| {{Unknown|High {{HideableNotes|Reduces Pandora's battery life in half (10h → 4h)}}}}
| VGA (D-SUB)
| {{Partial|Yes, but has performance issues.}}
| Needs to be integrated with preferences. {{HideableNotes|Currently I (who?) must edit xorg.conf and mess with xinerama.}} Good for presentations, dragging a window is bearable, but hi-res video is slow. Works in Linux without any issues.
|-
| DisplayLink usb 2.0 to SVGA adapter WS Tech USB-DVI
| udlfb
| USB
| USB 2.0
| 500mA
| VGA (D-SUB)
| Yes
| 17e9:0198 DisplayLink. No hub needed. Module and userspace here:
git clone http://git.plugable.com/webdav/udlfb/
git clone http://git.plugable.com/webdav/xf-video-udlfb/
|-
| Magic Control Technology Corp. Trigger II External Graphics
| sisusb
| USB
| USB 2.0
| 500mA
| ?
| ?
| ID 0711:5200 Magic Control Technology Corp. A kernel recompile is needed. In /usr/src/linux/drivers/usb/misc/sisusbvga , edit sisusb.c , and add

{ USB_DEVICE(0x0711, 0x5200) },

in the list around line 3250
Get the latest xf86-video-sisusb driver here:
http://xorg.freedesk...ividual/driver/

|}

= Video capture devices =

== Webcams ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Exoo No Driver/USB 2.0 Webcam (Model No.: M053)
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{No}}
| Bought from [http://www.dealextreme.com/details.dx/sku.14991 DealExtreme]. Works in Linux.
|-
| Logitech Quickcam Communicate Deluxe
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{No}}
| USB ID: 046d:0992, works though [http://linux-uvc.berlios.de/ uvcvideo]. Works in Linux.
|-
| Logitech HD Webcam C270 720p
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Partial|Yes, but audio untested}}
| ID 046d:0825 Logitech, Inc. Audio recognized, but not tested. More info to come. Works in Linux.
|-
| Logitech HD Webcam Pro 9000
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Partial|Yes, but audio untested}}
| ID 046d:0990 Logitech, Inc. Audio recognized, but not tested. Great Picture! Works in Linux.
|}

= Audio devices =

== Microphones/recorders ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| [http://www.bluemic.com/yeti/] Blue Yeti
| not required
| standard-A
| unknown
| unknown
| standard-A port via High Speed USB hub
| {{unknown|Not thoroughly tested.}}
| Very roughly tested 2012-06-13 by [[user:spiralofhope|spiralofhope]] using Mumble. More testing required. {{HideableNotes|The system recognizes the Yeti, and it appears in Mumble's list of available devices, but the audio wizard doesn't show the Yeti as having input. Additional troubleshooting is required, as is checking the manual/company website for missing information.}}
|-
| [http://www.zoom.co.jp/english/products/h2/] Zoom H2 Handy Recorder
| not required
| standard-A
| USB 1.1
| 300mA
| standard-A port via High Speed USB hub
| {{Yes|Yes, needs a USB hub.}}
| Can record into Audacity, but won't be recognized unless connected through USB hub.[http://www.gp32x.com/board/index.php?/topic/59301-audacity-1-3-12/page__view__findpost__p__947602].
|}

== MIDI controllers ==

EvilDragon bundled the usb MIDI class drivers in the default firmware image, therefore ANY class-compliant MIDI device should work with the Pandora, out of the box.[http://www.gp32x.com/board/index.php?/topic/58523-zynaddsubfx/page__view__findpost__p__938432]

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Akai LKP25
| Not required
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/58523-zynaddsubfx/page__view__findpost__p__938432]}}
|
|-
| M-Audio MIDISPORT 2x2 Anniv
| Not required
| {{Unknown}}
| {{Unknown}}
| 400mA
| {{Unknown}}
| {{Unknown}}
| ID 0763:1050 Midiman. High current draw!
|-
|}

== USB audio controllers ==

Some are "professional soundcard"; see [http://en.wikipedia.org/wiki/Sound_card#Professional_soundcards_.28audio_interfaces.29 definition on Wikipedia].

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Cakewalk UA-1G
| not required
| Standard-A
| USB 2.0
| 200mA
| Standard-A port
| {{Yes}}
| ID 0582:00e9 Roland Corp. This device may be similar to older Edirol/Roland USB audio devices. Runs and record under Slackware. Jack audio server realtime recording works. Recognized but not tested under official OS. A hub, powered or not, is needed.
|-
| Connectland AUDIO ADAPTER
| not required
| Standard-A
| USB 2.0
| 100mA
| Standard-A port
| {{Yes}}
| ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter . CMedia CM108 Virtual 7.1 Channel Sound. Has vol +, vol -, mute headspeaker, mute mic buttons. Mini-jack audio in and out. A non-powered hub is needed.
|}

= Input devices =

Any HID ([http://en.wikipedia.org/wiki/Human_interface_device Human Interface Device]) compliant keyboard, mouse or game controller should work on the Pandora. Most of those device are low speed or full speed USB device and will need to be connected though either a [[USB_reference#OTG host mode|USB OTG adapter/cable]] or a [[USB reference#What’s all this stuff about USB 1.1 and USB 2.0? Isn’t USB, uh, universal?|USB2 hub]] in order to work on the Pandora.

== External Game Controllers ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| 2-TECH SNES-to-USB adapter
| Not required
| Standard-A
| Low speed
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| USB description is "HuiJia USB GamePad", <tt>lsusb</tt> calls it "0e8f:3013 GreenAsia Inc."
|-
| USB Super RetroPort (SNES-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Bought from [http://www.retrousb.com/product_info.php?cPath=21&products_id=29 RetroZone]. Works in Linux.
|-
| USB RetroPort (NES-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Bought from [http://www.retrousb.com/product_info.php?cPath=21&products_id=28 RetroZone]. Works in Linux.
|-
| Trio Linker Plus II (PlayStation,-GameCube,-and-Dreamcast-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Bought from [http://www.play-asia.com/paOS-13-71-6m-49-en-70-1zfv.html Play-Asia]. Works in Linux.
|-
| NAZAR V47 USB Force Feedback Vibrating Gamepad Controller for PC
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Whether it really contains the claimed force feedback feature is unknown as this feature does not work under Linux - bought from [http://www.dealextreme.com/details.dx/sku.24551 DealExtreme]. Works in Linux.
|-
| 10-Fire-Button Double Vibration Feedback USB PC Arcade Joystick
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| Whether it really contains the claimed force feedback feature is unknown as this feature does not work under Linux - bought from [http://www.dealextreme.com/details.dx/sku.27821 DealExtreme]. Works in Linux.
|-
| Official PlayStation 3 controller
| Not required
| Standard-A
| Full speed
| {{Unknown}}
| USB A To Mini B Cable via High Speed Hub
| {{unknown}}
| This is for USB not bluetooth compatibility. Sixaxis and DualShock not tested. Works in Linux.
|-
| Saitek PLC Cyborg Force Rumble Pad (P2500) - 06a3:ff0c
| {{unknown}}
| Standard-A
| {{unknown}}
| 5V
| Standard-A port via High Speed Hub
| {{Unknown|Not fully tested}}
| Partial test attempted 2012-06-24 by [[user:spiralofhope|spiralofhope]]. lsusb lists it. More testing required. {{HideableNotes|A gamepad testing procedure needs to be defined. See [[Joystick testing]].}}
|-
| Thrustmaster Firestorm Digital 3 Gamepad
| Not required
| Standard-A
| Low speed
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| ID 07b5:0213 Mega World International, Ltd Thrustmaster Firestorm Digital 3 Gamepad.
|-
| Wired Xbox 360 Controller
| xpad module
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{unknown}}
| This also includes gamepads for PC that needs the Windows Xinput driver. Such gamepads include the Logitech Chillstream. Works in Linux.
|-
| WiseGroup.,Ltd SmartJoy Dual PLUS Adapter (dual PSX to USB joypad adapter)
| Not required
| Standard-A
| USB 1
| 100mA
| Standard-A port via USB 1-compatible High Speed Hub
| {{Yes}}
| ID 6677:8802. Works in Linux.
|-
| Logitech Cordless RumblePad 2
| Not required
| Standard-A
| Low speed
| 100mA
| Standard-A port via High Speed Hub
| {{Yes}}
| Product-ID: 0xc219, Vendor-ID: 0x046d (Logitech Inc.), [http://www.logitech.com/support/287 Official product support website],<br>All buttons worked fine in PCSX, analog sticks not tested, but likely work"
|-
|}

== Touchpads ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| [http://www.logitech.com/en-us/mice-pointers/mice/devices/8417 Logitech Wireless Touchpad]
| Not required
| Standard-A
| {{Unknown}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| Left and right four-finger swipes aren't mapped to anything by default in XFCE. They can be mapped as keyboard shortcuts.
|}

== Graphics tablets ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Works on Pandora
! Additional comments
|-
| Bamboo Multitouch
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{No|No [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__881806]}}
| It's not known if this works in Linux.
|-
| Genius Tablet
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Yes|Yes, [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__883140 via USB hub]}}
| It's not known if this works in Linux.
|-
| Wacom CTH-460
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{No|No [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__924422]}}
| Would need a patched driver to work. It's not known if this works in Linux.
|-
| Wacom Volito2 Tablet (Model: CTF-420)
| Not required
| Standard-A
| Low speed
| 40mA [http://www.my-volito.com/volito/specs.asp?lang=en]
| {{No}}
| USB ID: 056a:0062
|}

== Mice ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Connector
! Works on Pandora
! Additional comments
|-
| Apple Mouse (M5769)
| USB
| {{No}}
| Seems to disable USB port, reboot afterwards required
|-
| Apple Mouse with Scroll Ball (A1152)
| USB
| {{Yes|Yes, needs a USB hub.}}
|
|-
| Cherry Ghostcord [http://www.amazon.de/Cherry-M85-26005DE-2-B-Unlimited-Home-Rechargeable/dp/B001EDSE0U/ref=tag_stp_s2_edpp_url]
| USB
| {{Yes|Yes, needs a USB hub.}}
| Part of a bundle with keyboard and a USB dongle for the connetion. With the dongle on the hub both devices work just fine (tested in XFCE)
|}

= Connectors, adapters, and hubs =

This section is intended as a general guide. Items in this section are standard USB accessories, so drivers are not required. Compatibility with Pandora is assumed. Please note that any external product links are provided for reference only, and are not an endorsement.

== OTG (On The Go) Adapters ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Works on Pandora
! Additional comments
|-
| Generic adapter
| {{No}}
| [http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=usb+otg+host+cable&_sacat=See-All-Categories Find on eBay] [http://www.amazon.co.uk/s/ref=nb_ss_ce?url=search-alias%3Delectronics&field-keywords=OTG+Cable+Adapter&x=3&y=23 Find on Amazon] These links are not 100% accurate. Check for `mini-a`, and on eBay, the price is higher by about $8.
|-
|Hama 00074214
| {{Yes}}
|[http://www.hama.de/00074214/hama-mini-usb-adapter-mini-usb-a-plug-usb-a-socket-015-m Manufacturer Page]
|-
| Nokia USB OTG adapter
| {{Yes}}
| [http://www.electronicproductonline.com/catalog/product_info.php?cPath=35_67&products_id=2043 Electronic Product Online]
|}

== Compact USB Hubs ==

Be sure to enable USB-host!

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Works on Pandora
! Additional comments
|-
| Griffin SmartShare USB [http://www.griffintechnology.com/products/smartshare-usb]
| {{No}}
|
|-
| Belkin F5U415 4 Port USB 2.0 Swivel Hub [http://catalog.belkin.com/IWCatProductPage.process?Product_Id=377085]
| {{No}}
| Comes with an optional power adapter.
|-
| Belkin F5U700 USB 2.0 7-Port Lighted Hub [http://www.belkin.com/uk/support/article/?lid=enu&pid=F5U700ea&aid=10289&scid=947]
| {{Yes}}
| Tested 2012-06-16 by [[user:spiralofhope|spiralofhope]] both with and without its power adapter.
|-
| Belkin F5U701 USB 2.0 7 Port Mobile Hub [http://www.belkin.com/IWCatProductPage.process?Product_Id=369788]
| {{Yes}}
| Tested by pabloh. Comes with an optional power adapter.
|-
| ID 0e8f:0016 GreenAsia Inc.
| {{No}}
| Tested by tsh. Labeled as high speed. Bought from ebay.
|-
| ID 05e3:0608 Targus with Genesys Logic 4 Port USB 2.0 Hub
| {{Yes}}
| Tested by Kazuki. Works.
|-
|Trust 4 port netbook hub ID 05e3:0608
| {{Yes}}
| Tested by tsh. Bought from [http://www.amazon.co.uk/gp/product/B0025X16AS Amazon].
|-
| High Speed 4 Port Mini USB 2.0 Hub for Laptop PC (non powered)
| {{Yes}}
| Octopus-style small cheap unpowered USB hub. Bought from [http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&item=270538502843 ebay]
|-
| Keeptech USB 2.0 Hub (7 Ports) with Power Adapter, KT-UH703 [http://www.keeptech.com/books_show.php?id=144]
| {{Yes}}
| Tested by [[User:Esn|Esn]]. Works powered or unpowered.
|-
| Logitech Premium 4-Port USB Hub [http://www.logitech.com/en-in/notebook-products/usb-hubs/devices/3048]
| {{Yes}}
|
|-
| LUPO 7-port USB 2.0 Hub (cheap octopus type which can be powered as there is dc socket)
| {{Partial|Yes. {{HideableNotes|Can use a power supply but wasn't tested with one.}}}}
| Tested by kilowatt. Bought from [http://www.amazon.co.uk/gp/product/B003BVDABG/ref=oss_product from amazon uk]
|-
| LogiLink USB 2.0 Hub 4-Port UA0086 [http://www.logilink.eu/showproduct/UA0086.htm]
| {{Yes}}
| Tested by Jones. Comes with an optional power adapter.
|-
| Logitec USB 2.0 LAN-TX/U2H3S Ethernet adapter + 3 USB ports [http://www.logitec.co.jp/products/lan/lantxu2h3/index.php]
| {{Yes}}
| See [http://pandorawiki.org/USB_compatibility_list#USB_to_Ethernet_adapters USB to ethernet adapters] for more details. USB 1 devices work perfectly. Also available as other brands: [http://www.amazon.com/USB-2-0-3-Port-Ethernet-Adapter/dp/B002OFJRW6/ref=sr_1_3?ie=UTF8&qid=1357779881&sr=8-3&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Encore-ENUET-3USB-3-Port-Ethernet-Adapter/dp/B0036FZJX4/ref=sr_1_1?ie=UTF8&qid=1357779881&sr=8-1&keywords=USB+ethernet+with+3+port+USB+hub] [http://www.amazon.com/Addlogix-3-port-USB-Hub-Ethernet/dp/B0030DO7OY/ref=sr_1_27?ie=UTF8&qid=1357780088&sr=8-27&keywords=USB+ethernet+with+3+port+USB+hub]
|-
| Rosewill RHB-220 4-port USB 2.0 Hub
| {{Yes}}
| Tested by Tyrant1919. Unpowered. Bought from [http://www.newegg.com/Product/Product.aspx?Item=N82E16817182168 Newegg].
|-
| i-rocks SLEEK HUB USB 2.0 4 Ports Hub [http://www.i-rocks.com/Product_detail.aspx?CLASS_ID=1036&PRODUCT_ID=1080]
| {{Yes}}
| Comes with an ac adapter, but can be used without. USB 1 devices work perfectly.
|-
| MSI StarHub201
| {{Yes}}
| Testet by mclien with keyboard and mouse in XFCE, unpowered, not on the MSI site (discontinnued, guess) [http://alatest.dk/anmeldelser/hubs-og-switches/msi-star-hub-201/po3-34222999,42/]
|}

[[Category:USB]]
[[Category:List]]